v0.5.3.6
- Fix issue where nhqm.conf is deleted when a crash happens
- Correct issue which was causing on some machine to crash on start
- Implement new mining address nhmp.auto.nicehash.com
- Redesign start/stop mining button
- Bypass latency check, it is not necessary anymore with a new mining address 
- Add PID fan control to AMD and Nvidia cards
- Correct issue where nhqm.conf was being modified constantly 
- Decrease smart fan update from 1s to 4s
- Decrease LHR check/update from 1s to 4s (=> reduces CPU usage)
- Compatibility fixes for Linux version
- Allows overriding fan regime while OC profile is applied
- Allows changing LHR parameter while auto-tuning is active
- Supported GPU list is determined using SM version and memory rather than using a hardcoded list
- Fix clock range for 3080ti for OC autotuning in OCtune

v0.5.3.5
- Fix cuda paths in several project as they were still pointing to old 11.3 version
- Fix bug which turned off nvidia core OC in profile2. This one is now restored
- Eula/notice won't show up anymore during installation, only when the program is run the first time or if files are missing.
- Add 3060 laptop 2520 to non LHR list
- Add 3070 laptop (that non lhr card is still unconfirmed, although a page on internet refers to is as non lhr)
- Bump minimal version to 470.05 in QM
- Added new 3050 and 3080 12Gb to non LHR list (new LHR version not sup…ported yet)
- Fix and add support for testnet segwit address

v0.5.3.4
- Support for segwit address
- New QM startup (AVG compliance)
- QM does not start mining automatically anymore
    + Display notice to be accepted by users (xcvtr-231; xcvt-229)
    + Solve various issues where QM is stuck waiting for excavator answer while this one has crashed. Force excavator to exit so that excavator can be restarted (nb: in some case a manual reboot may still be required (hard driver crash))
- Increase /devices_cuda API timeout as it was causing QM to report a non existing lost of communication with excavator (xcvtr-226)
- Apply core clock/voltage OC only on highest power states for 5xxx serie and below (xcvtr-238)
- Solve issue where the "start" buttons were not synchronized
- Main form is shown by default, behavior can be changed in setting or from the main form
- Eula/notice is required is the rtfs files are missing from licences directory
- Add 3050 to list of LHR card
- Fix logic such that non LHR card such as 3090 cannot trigger LHR
- Solve issue where the "start" buttons were not synchronized
- Main form is shown by default, behavior can be changed in setting or from the main form
- Eula/notice is required is the rtfs files are missing from licences directory
- Add 3050 to list of LHR card
- Fix logic such that non LHR card such as 3090 cannot trigger LHR
- Treat as non LHR the 3060 LHRv1 if it is detected is conjunction with nvidia driver 470.05 which allows to bypass LHR.

v0.5.3.3
- Fix crashes due to the presence of AMD processor with iGPU (and hardwares not supported by Overdrive)
- Integrated GPU are now properly recognized but are disabled (appears as "stopped" in rig manager)
- Disable GPU with less than 5Gb of vram (gpu appears as "stopped" in rig manager)
- Fix issue where the AMD detection routine in QM was failing while loading hardware information on a rig with more than 5/6 gpu's. The routine can now support up to 16 gpu's
- Implement Game Mode for AMD card (same level of support as NVIDIA cards)  
- fix issue with 5xxx online profile crashing the driver on reset when core voltage has been modified 
- fix a potential memory leak in opencl as all allocated memory buffer were not properly released when a new dag detected 
- cosmetic changes in excavator execution window:
     + AMD cards are displayed in the same way as the Nvidia ones
     + error messages related to the AMD detections appears only for machines having AMD cards
     + remove unnecessary debugging information

v0.5.3.2
- Correct memory leak due to cl_event
- Remove unecessary cl_event
- Use a fixed delay time in latency hiding logic 
- Reorganise buffer declaration
- Allow to bypass AMD device detection which seems to no work for some users
- Fix flow to avoid crashes on non ampere gpus

v0.5.3.1
- Store autotune parameters
- Support for AMD cards
- Bug fixes and small improvements

v0.5.3.0
- Unlock LHR cards
- New icons
- Support for reporting mining statistics with key 's'
- Connection related reports
- Added age agreement checkbox
- Removed hidden miner execution settings
- Fix for incorrect speed reporting at stratup
- More stable speed reports during runtime
- Small improvement on ethereum kernel
- OCTune LHR manipulation
- Bug fixes and small improvements

v0.5.2.0
- Added EULA dialog
- Added ability to set EnvironmentVariables (thus CUDA vars)
- Added two more mining locations
- Bug fixes and small improvements

v0.5.1.6
- Bug fixes and small improvements

v0.5.1.5
- OPTIMIZE support for enterprise cards (Tesla, Quadro)
- Update backup
- Bug fixes and small improvements

v0.5.1.4
- OCTune fixes and improvements
- disable CPU mining during Game Mode
- Bug fixes and small improvements

v0.5.1.3
- Bug fixes and small improvements

v0.5.1.2
- Bug fixes and small improvements

v0.5.1.0
- OCTune: display subvendor
- Improved configurability
- Added 5th fan mode (Target plus decrease MCC)
- Bug fixes and small improvements

v0.5.0.1
- Multilang support
- Game Mode - ability to override disp device
- Added optimization: MSI
- Game Mode: reset memory timings when act
- Default apply Lite Optimization
- Bug fixes and small improvements

v0.4.7.1
- Crash detect & recovery
- OPTIMIZE/OCTune exclusivity
- Bug fixes and small improvements

v0.4.7.0
- Update to CUDA 11.2 update 2
- NVIDIA driver ver min 461.33
- Bug fixes and small improvements

v0.4.6.1
- Improved shutdown OC restore
- Added autostart countdown dialog
- Bug fixes and small improvements

v0.4.6.0
- Fixed GTX 1660 SUPER Micron Optimizations
- Fixed invalid DAG gen for some cards
- Omit MCC when generating DAG
- VRAM Temp for GDDR6
- Bug fixes and small improvements

v0.4.5.5
- Bug fixes and small improvements

v0.4.5.4
- Alt OC with MAX TDP (Suprim X BIOS compatibility fix)
- Persistent core uvolt OC
- Added backup URL for optimizations data
- Bug fixes and small improvements

v0.4.5.3
- Greatly improved install & update security with N/M signatures
- Bug fixes and small improvements

v0.4.5.0
- Improved CUDA detection mechanism
- Improved update mechanism
- Increased security (no more CORS)
- Bug fixes and small improvements

v0.4.4.0
- Added OPTIMIZATION profiles: High, Efficient, EfficientLow
- GTX 1660 SUPER Hynix OPTIMIZATION separation
- Bug fixes and small improvements

v0.4.3.1
- Small speed increase for some older gen cards
- Added OPTIMIZE for: GTX 1070 Ti, GTX 1070, GTX 1060 6GB
- Fixed device index bug that was causing invalid DAG issues
- Bug fixes and small improvements

v0.4.3.0
- Added OPTIMIZE for: GTX 1080 Ti, GTX 1080
- Bug fixes and small improvements

v0.4.2.1
- Memory timings to OCTune
- Bug fixes and small improvements

v0.4.2.0
- Added option to manipulate memory timings
- Bug fixes and small improvements

v0.4.1.5
- Configurable speed zero/max grace time
- Added WhenNoDevices error handling (nothing, restart, reboot, rest. driver)
- Bug fixes and small improvements

v0.4.1.4
- Compatibility with NVIDIA 470.05 developer drivers
- Bug fixes and small improvements

v0.4.1.3
- Duplicate uniqueID gen new
- NVAPI Power methods (reliability++)
- Bug fixes and small improvements

v0.4.1.2
- Bug fixes and small improvements

v0.4.1.1
- Improved optional settings dialog
- Bug fixes and small improvements

v0.4.0.3
- More robust device detection identification across PC reboots
- Fixed binding interface issues
- More annoying first time info how to access NHQM
- Bug fixes and small improvements

v0.4.0.1
- Fixed critical get memory speed bug in v0.4.0.0
- Delayed default autostart from 5 to 15 seconds
- Full support for TITAN RTX

v0.4.0.0
- Added experimental voltage control for undervolting
- Added reporting of hotspot (vram) temperature
- Optimize set fan speed according to GPU & HotSpot for most of cards
- Added 4th error recovery option: driver restart
- Bug fixes and small improvements

v0.3.3.0
- Added auto detection of best location
- Improved formatting of config file
- Added Export log files button
- Bug fixes and small improvements

v0.3.2.7
- Added ability to disable auto update feature
- Fixed power reporting for some (Mobile) devices
- Added Help - link to Wiki
- Option to reinstall if already installed
- Bug fixes and small improvements

v0.3.2.6
- Exposed additional SmartFan (advanced) settings
- Pascal reporting of FAN level in % if possible
- Added support for TITAN V
- Bug fixes and small improvements

v0.3.2.5
- Bug fixes and small improvements

v0.3.2.3
- Added Game Mode (experimental)
- Bug fixes and small improvements

v0.3.2.2
- SmarFan improvements
- Added DNSoverHTTPS
- Improved error handling
- Bug fixes and small improvements

v0.3.2.1
- Bug fixes and small improvements

v0.3.2.0
- Improved speed measuring
- Installer/uninstaller
- Bug fixes and small improvements

v0.3.1.2
- Excavator: Pascal speed restored
- Service autostart method removed
- Bug fixes and small improvements

v0.3.1.1
- Excavator with SmartFan
- OC profiles are separate now from Fan profiles
- Bug fixes and small improvements

v0.3.1.0
- Optimize profiles (manage over Rig manager)
- Bug fixes and small improvements

v0.3.0.7
- Excavator build 574
- OCTune: added alternative overclocking method
- OCTune: added experimental autotune
- OCTune: greatly improved autotune
- Added GDDR6X temp measurement (RTX 3080 & 3090)
- Bug fixes and small improvements

v0.3.0.5
- Experimental Autotuner added
- Bug fixes and small improvements

v0.3.0.0
- Autoupdater
- Bug fixes and small improvements

v0.2.0.0
- Added XMRig CPU Miner
- Added error-case handlers
- Bug fixes and small improvements