// ===========================================================================
// Copyright 2018 Autodesk, Inc. All rights reserved.
//
// Use of this software is subject to the terms of the Autodesk license
// agreement provided at the time of installation or download, or which
// otherwise accompanies this software in either electronic or hard copy form.
// ===========================================================================
global proc modelingToolkitLoadCallbackProc( string $pluginName ) 
{
	if($pluginName == "modelingToolkit")
	{
		MTsetToggleMenuItem;
	}
}

global proc PolygonsBuildToolsMenu( string $parent )
//
// Description:
//		Modeling Mesh Tools menu (which is also the legacy Polygons Mesh Tools menu)
//
{
	if (! `isTrue "PolygonsExists"`) return;

	setParent -m $parent; 

	if (`menu -q -ni $parent` != 0) {

		MTsetToggleMenuItem;

		// Else build all UI
	}else{

		menuItem
			-rtc "ToggleModelingToolkit"
			-version "2014"
			ToggleModelingToolkitMenuItem;

		menuItem -divider true -dividerLabel (uiRes("m_PolygonsBuildToolsMenu.kToolsDivider"));

			string $cmd = "AppendToPolygonTool";
			menuItem
				-ddc "setToolTo polyAppendFacetContext ; polyAppendFacetCtx -e -pc `optionVar -q polyKeepFacetsPlanar` polyAppendFacetContext; toolPropertyWindow"
				-dmc "polygonsMenuItemToShelf \"setToolTo polyAppendFacetContext ; polyAppendFacetCtx -e -pc `optionVar -q polyKeepFacetsPlanar` polyAppendFacetContext\""
				-rtc $cmd appendItem;

				$cmd = "AppendToPolygonToolOptions";
				menuItem -optionBox 1 -i "polyAppendFacet.png" 
					-annotation (getRunTimeCommandAnnotation($cmd))
					-ecr false 
					-c $cmd appendOptionItem;

			menuItem
				-rtc "EnterConnectTool"
				-dragDoubleClickCommand "dR_connectTool; toolPropertyWindow;"
				MTKConnectTool;

				menuItem
					-annotation (uiRes("m_PolygonsBuildToolsMenu.kMTKConnectToolOptions"))
					-command "dR_connectTool; toolPropertyWindow;"
					-optionBox 1
					-image "connect_NEX32.png" 
					;

			menuItem
				-rtc "PolyCreaseTool" 
				-enableCommandRepeat 1 
				;

				menuItem
					-label (uiRes("m_PolygonsBuildToolsMenu.kCreaseToolOptions"))
					-annotation (getRunTimeCommandAnnotation("PolyCreaseToolOptions"))
					-command "PolyCreaseToolOptions" 
					-optionBox 1
					-enableCommandRepeat 1
					-image "polyCrease.png" 
					;

			$cmd = "CreatePolygonTool";
			menuItem 
				-rtc $cmd 
				-dragDoubleClickCommand "setToolTo polyCreateFacetContext ; polyCreateFacetCtx -e -pc `optionVar -q polyKeepFacetsPlanar` polyCreateFacetContext; toolPropertyWindow"
				-dragMenuCommand "polygonsMenuItemToShelf \"setToolTo polyCreateFacetContext ; polyCreateFacetCtx -e -pc `optionVar -q polyKeepFacetsPlanar` polyCreateFacetContext\""
				;
				
				$cmd = "CreatePolygonToolOptions";
				menuItem -optionBox true 
					-annotation (getRunTimeCommandAnnotation($cmd))
					-image "polyCreateFacet.png" 
					-command $cmd 
					;
			
			menuItem
				-rtc "SplitEdgeRingTool"
				-dragDoubleClickCommand "InsertEdgeLoopToolOptions"
				;

				menuItem -optionBox true
					-annotation (getRunTimeCommandAnnotation("SplitEdgeRingToolOptions"))
					-image "polySplitEdgeRing.png" 
					-command "SplitEdgeRingToolOptions" 
					;

			menuItem
				-rtc "MakeHoleTool"
				-dragDoubleClickCommand "MakeHoleToolOptions"
				;

				menuItem -optionBox true
					-annotation (getRunTimeCommandAnnotation("MakeHoleToolOptions"))
					-image "polyMergeFacet.png" 
					-command "MakeHoleToolOptions"
					;

			menuItem
				-version "2015"
				-rtc "MultiCutTool"
				-dragDoubleClickCommand "dR_multiCutTool; toolPropertyWindow;"
				MTKMultiCutTool;

				menuItem
					-annotation (uiRes("m_PolygonsBuildToolsMenu.kMTKMultiCutToolOptions"))
					-command "dR_multiCutTool;  toolPropertyWindow;" 
					-optionBox 1
					-image "multiCut_NEX32.png" 
					;

			$cmd = "DuplicateEdges";
			menuItem
				-rtc $cmd
				-dragMenuCommand "performPolyDuplicateEdge 2"
				-dragDoubleClickCommand "DuplicateEdgesOptions"
				EditPolygonDuplicateEdgesItem
				;

				$cmd = "DuplicateEdgesOptions";
				menuItem -optionBox true
					-annotation (getRunTimeCommandAnnotation($cmd))
					-image "polyDuplicateEdgeLoop.png" 
					-command $cmd
					EditPolygonDuplicateEdgesOptionsItem
					;

			menuItem
				-rtc "PaintReduceWeightsTool"
				-dragDoubleClickCommand "PaintReduceWeightsToolOptions"
				;

				menuItem -optionBox true
					-annotation (getRunTimeCommandAnnotation("PaintReduceWeightsToolOptions"))
					-image "polyReduce.png" 
					-command "PaintReduceWeightsToolOptions" 
					;

			menuItem -rtc "PaintTransferAttributes" wtPaintTransferItem;
			
				menuItem -optionBox true 
					-annotation (uiRes("m_PolygonsBuildToolsMenu.kPaintTransferAttributesWeightsToolOptionAnnot1")) 
					-image "polyTransferAttributesWeights.png"
					-command "artAttrToolScript 3 \"transferAttributes\"" wtPaintTransferDialogItem;

			menuItem
				-rtc "QuadDrawTool" 
				-dragDoubleClickCommand "dR_quadDrawTool; toolPropertyWindow;" 
				MTKQuadDrawTool;

				menuItem
					-annotation (uiRes("m_PolygonsBuildToolsMenu.kMTKQuadDrawToolOptions"))
					-command "dR_quadDrawTool; toolPropertyWindow;" 
					-optionBox 1
					-image "quadDraw_NEX32.png" 
					;

			menuItem -label (uiRes("m_PolygonsBuildToolsMenu.kPolySculptTools")) 
				-version "2016"
				-subMenu 1
				-allowOptionBoxes true 
				-tearOff 1
				-annotation (uiRes("m_PolygonsBuildToolsMenu.kPolySculptToolsAnn"))
				;

				menuItem
					-rtc    ("SetMeshSculptTool")
					-dragDoubleClickCommand ("ShowMeshSculptToolOptions");

					menuItem -optionBox 1 
						-image     "Sculpt.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshSculptToolOptions")`
						-enableCommandRepeat false 
						-command    "ShowMeshSculptToolOptions" ;

				menuItem
					-rtc    ("SetMeshSmoothTool")
					-dragDoubleClickCommand ("ShowMeshSmoothToolOptions");

					menuItem -optionBox 1 
						-image     "Smooth.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshSmoothToolOptions")`
						-enableCommandRepeat false 
						-command    "ShowMeshSmoothToolOptions" ;

				menuItem
					-rtc    ("SetMeshRelaxTool")
					-dragDoubleClickCommand ("ShowMeshRelaxToolOptions");

					menuItem -optionBox 1 
						-image     "Relax.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshRelaxToolOptions")`
						-enableCommandRepeat false 
						-command    "ShowMeshRelaxToolOptions" ;

				menuItem
					-rtc    ("SetMeshGrabTool")
					-dragDoubleClickCommand ("ShowMeshGrabToolOptions");

					menuItem -optionBox 1 
						-image     "Grab.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshGrabToolOptions")`
						-enableCommandRepeat false 
						-command    "ShowMeshGrabToolOptions" ;

				menuItem
					-rtc    ("SetMeshPinchTool")
					-dragDoubleClickCommand ("ShowMeshPinchToolOptions");

					menuItem -optionBox 1 
						-image     "Pinch.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshPinchToolOptions")`
						-enableCommandRepeat false 
						-command    "ShowMeshPinchToolOptions" ;

				menuItem
					-rtc    ("SetMeshFlattenTool")
					-dragDoubleClickCommand ("ShowMeshFlattenToolOptions");

					menuItem -optionBox 1 
						-image     "Flatten.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshFlattenToolOptions")`
						-enableCommandRepeat false 
						-command    "ShowMeshFlattenToolOptions" ;

				menuItem
					-rtc    ("SetMeshFoamyTool")
					-dragDoubleClickCommand ("ShowMeshFoamyToolOptions");

					menuItem -optionBox 1 
						-image     "Foamy.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshFoamyToolOptions")`
						-enableCommandRepeat false 
						-command    "ShowMeshFoamyToolOptions" ;

				menuItem
					-rtc    ("SetMeshSprayTool")
					-dragDoubleClickCommand ("ShowMeshSprayToolOptions");

					menuItem -optionBox 1 
						-image     "Spray.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshSprayToolOptions")`
						-enableCommandRepeat false 
						-command    "ShowMeshSprayToolOptions" ;

				menuItem
					-rtc    ("SetMeshRepeatTool")
					-dragDoubleClickCommand ("ShowMeshRepeatToolOptions");

					menuItem -optionBox 1 
						-image     "Repeat.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshRepeatToolOptions")`
						-enableCommandRepeat false 
						-command    "ShowMeshRepeatToolOptions" ;

				menuItem
					-rtc    ("SetMeshImprintTool")
					-dragDoubleClickCommand ("ShowMeshImprintToolOptions");

					menuItem -optionBox 1 
						-image     "Imprint.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshImprintToolOptions")`
						-enableCommandRepeat false 
						-command    "ShowMeshImprintToolOptions" ;

				menuItem
					-rtc    ("SetMeshWaxTool")
					-dragDoubleClickCommand ("ShowMeshWaxToolOptions");

					menuItem -optionBox 1 
						-image     "Wax.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshWaxToolOptions")`
						-enableCommandRepeat false 
						-command    "ShowMeshWaxToolOptions" ;

				menuItem
					-rtc    ("SetMeshScrapeTool")
					-dragDoubleClickCommand ("ShowMeshScrapeToolOptions");

					menuItem -optionBox 1 
						-image     "Scrape.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshScrapeToolOptions")`
						-enableCommandRepeat false 
						-command    "ShowMeshScrapeToolOptions" ;

				menuItem
					-rtc    ("SetMeshFillTool")
					-dragDoubleClickCommand ("ShowMeshFillToolOptions");

					menuItem -optionBox 1 
						-image     "Fill.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshFillToolOptions")`
						-enableCommandRepeat false 
						-command    "ShowMeshFillToolOptions" ;

				menuItem
					-rtc    ("SetMeshKnifeTool")
					-dragDoubleClickCommand ("ShowMeshKnifeToolOptions");

					menuItem -optionBox 1 
						-image     "Knife.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshKnifeToolOptions")`
						-enableCommandRepeat false 
						-command    "ShowMeshKnifeToolOptions" ;

				menuItem
					-rtc    ("SetMeshSmearTool")
					-dragDoubleClickCommand ("ShowMeshSmearToolOptions");

					menuItem -optionBox 1 
						-image     "Smear.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshSmearToolOptions")`
						-enableCommandRepeat false 
						-command    "ShowMeshSmearToolOptions" ;

				menuItem
					-rtc    ("SetMeshBulgeTool")
					-dragDoubleClickCommand ("ShowMeshBulgeToolOptions");

					menuItem -optionBox 1 
						-image     "Bulge.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshBulgeToolOptions")`
						-enableCommandRepeat false 
						-command    "ShowMeshBulgeToolOptions" ;

				menuItem
					-rtc    ("SetMeshAmplifyTool")
					-dragDoubleClickCommand ("ShowMeshAmplifyToolOptions");

					menuItem -optionBox 1 
						-image     "Amplify.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshAmplifyToolOptions")`
						-enableCommandRepeat false 
						-command    "ShowMeshAmplifyToolOptions" ;

				menuItem
					-rtc    ("SetMeshFreezeTool")
					-dragDoubleClickCommand ("ShowMeshFreezeToolOptions");

					menuItem -optionBox 1 
						-image     "Freeze.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshFreezeToolOptions")`
						-enableCommandRepeat false 
						-command    "ShowMeshFreezeToolOptions" ;

				menuItem -divider true -dividerLabel (uiRes("m_PolygonsBuildToolsMenu.kShapeDivider"));

				menuItem
					-version "2017"
					-rtc    ("SetMeshSmoothTargetTool")
					-dragDoubleClickCommand ("ShowMeshSmoothTargetToolOptions");

					menuItem -optionBox 1 
						-image     "SmoothTarget.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshSmoothTargetToolOptions")`
						-version "2017"
						-enableCommandRepeat false 
						-command    "ShowMeshSmoothTargetToolOptions" ;

				menuItem
					-version "2017"
					-rtc    ("SetMeshCloneTargetTool")
					-dragDoubleClickCommand ("ShowMeshCloneTargetToolOptions");

					menuItem -optionBox 1 
						-image     "CloneTarget.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshCloneToolOptions")`
						-version "2017"
						-enableCommandRepeat false 
						-command    "ShowMeshCloneTargetToolOptions" ;

				menuItem
					-version "2017"
					-rtc    ("SetMeshMaskTool")
					-dragDoubleClickCommand ("ShowMeshMaskToolOptions");

					menuItem -optionBox 1 
						-image     "Mask.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshMaskToolOptions")`
						-version "2017"
						-enableCommandRepeat false 
						-command    "ShowMeshMaskToolOptions" ;

				menuItem
					-version "2017"
					-rtc    ("SetMeshEraseTool")
					-dragDoubleClickCommand ("ShowMeshEraseToolOptions");

					menuItem -optionBox 1 
						-image     "Erase.png"
						-annotation `getRunTimeCommandAnnotation("ShowMeshEraseToolOptions")`
						-version "2017"
						-enableCommandRepeat false 
						-command    "ShowMeshEraseToolOptions" ;

			setParent -m ..;

			menuItem
				-rtc "SlideEdgeTool"
				-dragDoubleClickCommand "SlideEdgeToolOptions"
				;

				menuItem -optionBox true
					-annotation (getRunTimeCommandAnnotation("SlideEdgeToolOptions"))
					-image "slideEdgeTool.png"
					-command "SlideEdgeToolOptions"
					;

			menuItem
				-rtc "MergeVertexTool" 
				-dragDoubleClickCommand "MergeVertexToolOptions"
				MTKTargetWeldTool;

				menuItem
					-label (uiRes("m_PolygonsBuildToolsMenu.kMTKTargetWeldToolOptions"))
					-annotation (getRunTimeCommandAnnotation("MergeVertexToolOptions"))
					-command "MergeVertexToolOptions"
					-optionBox 1
					-image "weld_NEX32.png" 
					;

		MTsetToggleMenuItem;
		loadPlugin -addCallback("modelingToolkitLoadCallbackProc");
		unloadPlugin -addCallback("modelingToolkitLoadCallbackProc");
	}
}