// ===========================================================================
// Copyright 2018 Autodesk, Inc. All rights reserved.
//
// Use of this software is subject to the terms of the Autodesk license
// agreement provided at the time of installation or download, or which
// otherwise accompanies this software in either electronic or hard copy form.
// ===========================================================================
//
//
// Creation Date:  17 June 2014
//
//
//  Procedure Name:
//      ModelingSurfacesMenu
//
//  Description:
//		Create the MODELING->Surfaces menu
//
//  Input Arguments:
//      Parent window that menu will be a part of.
//
//  Return Value:
//      None.
//

global proc ModelingSurfacesMenu ( string $parent ) 
//
// Description:
//		Modeling Surfaces menu
//
{
	if (! `isTrue "SurfaceUIExists"`) return;

	setParent -m $parent;
	if( `menu -q -ni $parent` != 0 ) {
		//
		//	Menu is built already - just return
		//
		return;
	}

	int $isAdvModel = `licenseCheck -mode "edit" -type "model"`;

	menuItem -divider true -dividerLabel (uiRes("m_ModelingSurfacesMenu.kCreateDivider"));
		
		string $cmd = "Loft";
		menuItem
			-rtc $cmd
			-dmc "loftToolScript 2"
			surfLoftItem;
		
			$cmd = "LoftOptions";
			menuItem -optionBox true 
				-label (uiRes("m_ModelingSurfacesMenu.kLoftOptions"))
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				-i "skin.png"
				loftDialogItem;
		
		$cmd = "Planar";
		menuItem 
			-rtc $cmd
			-dmc "planarToolScript 2"
			planarTrimItem;

			$cmd = "PlanarOptions";
			menuItem -optionBox true -i "planarTrim.png"
				-label (uiRes("m_ModelingSurfacesMenu.kPlanarOptions")) 
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				planerTrimDialogItem;
			
		$cmd = "Revolve";
		menuItem
			-rtc $cmd
			-dmc "revolveToolScript 2"
			surfRevolveItem;

			$cmd = "RevolveOptions";
			menuItem -optionBox true
				-label (uiRes("m_ModelingSurfacesMenu.kRevolveOptions"))
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				-i "revolve.png"
				revolveDialogItem;
		
		menuItem -d true -ld false;

		menuItem -label (uiRes("m_ModelingSurfacesMenu.kBirail"))  -sm 1 -to 1 -aob true;

			$cmd = "Birail1";
			menuItem
				-rtc $cmd
				-dmc "birailToolScript 2 1"
				spBirailItem;

				$cmd = "Birail1Options";
				menuItem -optionBox true -image "birail1Gen.png"
					-annotation (getRunTimeCommandAnnotation($cmd))
					-c $cmd
					birail1ToolDialog;

			$cmd = "Birail2";
			menuItem
				-rtc $cmd
				-dmc "birailToolScript 2 2"
				dpBirailItem;

				$cmd = "Birail2Options";
				menuItem -optionBox true -image "birail2Gen.png"
					-annotation (getRunTimeCommandAnnotation($cmd))
					-c $cmd
					birail2ToolDialog;

			$cmd = "Birail3";
			menuItem
				-rtc $cmd
				-dmc "birailToolScript 2 3"
				mpBirailItem;

				$cmd = "Birail3Options";
				menuItem -optionBox true -image "birail3Gen.png"
					-annotation (getRunTimeCommandAnnotation($cmd))
					-c $cmd
					birail3ToolDialog;

		setParent -m .. ;

		$cmd = "Extrude";
		menuItem
			-rtc $cmd
			-dmc "extrudeToolScript 2"
			surfExtrudeItem;

			$cmd = "ExtrudeOptions";
			menuItem -optionBox true 
				-label (uiRes("m_ModelingSurfacesMenu.kExtrudeOptions"))
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				-i "extrude.png"
				extrudeDialogItem;

		menuItem -d true -ld false;

		$cmd = "Boundary";
		menuItem
			-rtc $cmd
			-dmc "boundaryToolScript 2"
			surfBoundaryItem;

			$cmd = "BoundaryOptions";
			menuItem -optionBox true
				-label (uiRes("m_ModelingSurfacesMenu.kBoundaryOptions"))
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				-i "boundary.png"
				boundaryDialogItem;
			
		if( `licenseCheck -m edit -type model` ) {
			$cmd = "SquareSurface";
			menuItem
				-rtc $cmd
				-dmc "squareSrfToolScript 2"
				surfSquareItem;

				$cmd = "SquareSurfaceOptions";
				menuItem -optionBox true
					-label (uiRes("m_ModelingSurfacesMenu.kSquareOptions"))
					-annotation (getRunTimeCommandAnnotation($cmd))
					-c $cmd
					-i "squareSrf.png"
					squareDialogItem;
		}

		menuItem -d true -ld false;

		$cmd = "Bevel";
		menuItem 
			-rtc $cmd
			-dmc "bevelToolScript 2"
			surfBevelItem;

			$cmd = "BevelOptions";
			menuItem -optionBox true 
				-label (uiRes("m_ModelingSurfacesMenu.kBevelOptions")) 
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				-i "bevel.png"
				bevelDialogItem;
		
		$cmd = "BevelPlus";
		menuItem 
			-rtc $cmd
			-dmc "bevelPlusToolScript 2"
			surfBevelPlusItem;

			$cmd = "BevelPlusOptions";
			menuItem -optionBox true 
				-label (uiRes("m_ModelingSurfacesMenu.kBevelPlusOptions")) 
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				-i "bevelPlus.png"
				bevelPlusDialogItem;

	menuItem -divider true -dividerLabel (uiRes("m_ModelingSurfacesMenu.kEditNurbsSurfacesDivider"));
		
		$cmd = "DuplicateNURBSPatches";
		menuItem
			-rtc $cmd
			-dmc "duplicateSurfaceToolScript 2"
			duplSrfItem;

			$cmd = "DuplicateNURBSPatchesOptions";
			menuItem -optionBox true -i "duplicateSurface.png"
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				duplSrfDialog;

			menuItem -d true -ld false;

		$cmd = "AlignSurfaces";
		menuItem
			-rtc $cmd
			-dmc "alignSurfaceToolScript 2"
			alignItem;

			$cmd = "AlignSurfacesOptions";
			menuItem -optionBox true -i "alignSurface.png" 
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				alignDialogItem;
		
		$cmd = "AttachSurfaces";
		menuItem
			-rtc $cmd
			-dmc "attachSrfToolScript 2"
			attachSrfItem;

			$cmd = "AttachSurfacesOptions";
			menuItem -optionBox true -i "align.png"
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				attachSrfDialog;

		menuItem -rtc "AttachSurfaceWithoutMoving"
			attachWithoutMovingItem;

		$cmd = "DetachSurfaces";
		menuItem
			-rtc $cmd
			-dmc "detachSurfaceToolScript 2"
			detachItem;

			$cmd = "DetachSurfacesOptions";
			menuItem -optionBox true -i "detach.png"
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				detachDialog;

		menuItem -rtc "MoveSurfaceSeam"
			moveSurfaceSeamItem;

		$cmd = "OpenCloseSurfaces";
		menuItem
			-rtc $cmd
			-dmc "closeSurfaceToolScript 2"
			closeItem;

			$cmd = "OpenCloseSurfacesOptions";
			menuItem -optionBox true -i "openCloseSurface.png"
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				closeDialogItem;
		
		menuItem -d true -ld false; 

		$cmd = "IntersectSurfaces";
		menuItem
			-rtc $cmd
			-dmc "intersectToolScript 2"
			intersectItem;

			$cmd = "IntersectSurfacesOptions";
			menuItem -optionBox true 
				-annotation (getRunTimeCommandAnnotation($cmd))
				-i "srfIntersect.png"
				-c $cmd
				intersectDialogItem;
		
		$cmd = "ProjectCurveOnSurface";
		menuItem
			-rtc $cmd
			-dmc "projectToolScript 2"
			projectCurveItem;

			$cmd = "ProjectCurveOnSurfaceOptions";
			menuItem -optionBox true
				-annotation (getRunTimeCommandAnnotation($cmd))
				-i "projectCurve.png"
				-c $cmd
				projectCurveDialogItem;

		$cmd = "TrimTool";
		menuItem 
			-rtc $cmd 
			trimSurfaceItem;

			$cmd = "TrimToolOptions";
			menuItem -optionBox true -image "trim.png"
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd 
				trimDialogItem;

		$cmd = "UntrimSurfaces";
		menuItem
			-rtc $cmd
			-dmc "untrimToolScript 2"
			untrimItem;

			$cmd = "UntrimSurfacesOptions";
			menuItem -optionBox true -image "untrim.png"
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				untrimDialogItem;
		
		menuItem -d true -ld false;

		if( $isAdvModel ) {
			$cmd = "ExtendSurfaces";
			menuItem
				-rtc $cmd
				-dmc "extendSurfaceToolScript 2"
				extendSrfItem;

				$cmd = "ExtendSurfacesOptions";
				menuItem -optionBox true -i "extendSurface.png"
					-annotation (getRunTimeCommandAnnotation($cmd))
					-c $cmd
					extendSurfaceDialogItem;
		}

		$cmd = "InsertIsoparms";
		menuItem
			-rtc $cmd
			-dmc "insertSurfaceToolScript 2"
			insertItem;

			$cmd = "InsertIsoparmsOptions";
			menuItem -optionBox true -i "insert.png"
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				insertDialog;

		if( $isAdvModel ) {
			$cmd = "OffsetSurfaces";
			menuItem
				-rtc $cmd
				-dmc "offsetSurfaceToolScript 2"
				surfOffsetItem;

				$cmd = "OffsetSurfacesOptions";
				menuItem -optionBox true
					-annotation (getRunTimeCommandAnnotation($cmd))
					-i "offsetSurface.png"
					-c $cmd
					offsetSurfaceDialogItem;
		}

		menuItem -d true -ld false;

		if( $isAdvModel ) {
			$cmd = "RoundTool";
			menuItem 
				-rtc $cmd 
				roundItem;

				$cmd = "RoundToolOptions";
				menuItem -optionBox true -image "roundSrf.png"
					-annotation (getRunTimeCommandAnnotation($cmd))
					-c $cmd
					roundOptionItem;
		}

		menuItem 
			-label (uiRes("m_ModelingSurfacesMenu.kStitch"))  
			-sm 1 -to 1 -aob true;

			$cmd = "StitchSurfacePoints";
			menuItem
				-rtc $cmd
				-dmc "performStitchSurfacePoints(2)"
				stitchSurfacePointsItem;

				$cmd = "StitchSurfacePointsOptions";
				menuItem -optionBox true
					-annotation (getRunTimeCommandAnnotation($cmd))
					-i "stitchSurfacePoints.png"
					-c $cmd
					stitchSurfacePointsDialogItem;

			$cmd = "StitchEdgesTool";
			menuItem 
				-rtc $cmd 
				surfStitchItem;

				$cmd = "StitchEdgesToolOptions";
				menuItem -optionBox true -image "stitchSrf.png"
					-annotation (getRunTimeCommandAnnotation($cmd))
					-c $cmd
					stitchSrfDialogItem;

			$cmd = "GlobalStitch";
			menuItem
				-rtc $cmd
				-dmc "globalStitchToolScript 2"
				globalStitchItem;

				$cmd = "GlobalStitchOptions";
				menuItem -optionBox true
					-annotation (getRunTimeCommandAnnotation($cmd))
					-image "globalStitch.png"
					-c $cmd
					globalStitchDialogItem;

		setParent -m .. ;

		menuItem 
			-label (uiRes("m_ModelingSurfacesMenu.kSurfaceFillet")) 
			-sm 1 -to 1 -aob true;

			$cmd = "CircularFillet";
			menuItem
				-rtc $cmd
				-dmc "circFilletToolScript 2"
				circularFilletItem;

				$cmd = "CircularFilletOptions";
				menuItem -optionBox true
					-annotation (getRunTimeCommandAnnotation($cmd))
					-i "surfaceFillet.png"
					-c $cmd
					circularFilletDialogItem;

			$cmd = "FreeformFillet";
			menuItem
				-rtc $cmd
				-dmc "freeFilletToolScript 2"
				freeFormFilletItem ;

				$cmd = "FreeformFilletOptions";
				menuItem -optionBox true
					-annotation (getRunTimeCommandAnnotation($cmd))
					-i "filletFreeform_S.png"
					-c $cmd
					freeFormFilletDialogItem;

			$cmd = "FilletBlendTool";
			menuItem
       			-rtc $cmd
       			-dmc "blendToolScript 2"
				blendItem;

				$cmd = "FilletBlendToolOptions";
				menuItem -optionBox true -image "blendSurface.png"
	        		-annotation (getRunTimeCommandAnnotation($cmd))
					-c $cmd
					blendDialogItem;

		setParent -m .. ;
		
		menuItem -d true -ld false;

		menuItem
		    -rtc "SculptGeometryTool"
		    -dragDoubleClickCommand "SculptGeometryToolOptions"
		    ;
	  
			menuItem -optionBox true
				-annotation (getRunTimeCommandAnnotation("SculptGeometryToolOptions"))
				-image "putty.png"
				-command "SculptGeometryToolOptions"
				;

		menuItem 
			-label (uiRes("m_ModelingSurfacesMenu.kSurfaceEditing")) 
			-sm 1 -to 1 -aob true;

			$cmd = "SurfaceEditingTool";
			menuItem 
				-rtc $cmd
				surfaceEditorItem;

				$cmd = "SurfaceEditingToolOptions";
				menuItem -optionBox true -image "surfaceEditor.png"
					-annotation (getRunTimeCommandAnnotation($cmd))
					-c $cmd
					surfaceEditorDialogItem;

			$cmd = "BreakTangent";
			menuItem
				-rtc $cmd
				breakTangentItem;

			$cmd = "SmoothTangent";
			menuItem
				-rtc $cmd
				smoothTangentItem;

		setParent -m ..;

		menuItem -d true -ld false;

		if( $isAdvModel ) {
			menuItem 
				-label (uiRes("m_ModelingSurfacesMenu.kBooleans"))  
				-sm 1 -to 1 -aob true;	

				$cmd = "SurfaceBooleanUnionTool";
				menuItem
					-rtc $cmd
					-dmc "nurbsBooleanToolScript 2 0"
					booleanUnionItem;

					$cmd = "SurfaceBooleanUnionToolOptions";
					menuItem -optionBox true -image "nurbsShellUnion.png"
						-annotation (getRunTimeCommandAnnotation($cmd))
						-c $cmd
						unionOptItem;

				$cmd = "SurfaceBooleanSubtractTool";
				menuItem
					-rtc $cmd
					-dmc "nurbsBooleanToolScript 2 1"
					booleanSubtractItem;

					$cmd = "SurfaceBooleanSubtractToolOptions";
					menuItem -optionBox true -image "nurbsShellSubtract.png"
						-annotation (getRunTimeCommandAnnotation($cmd))
						-c $cmd
						subtractOptItem;

				$cmd = "SurfaceBooleanIntersectTool";
				menuItem
					-rtc $cmd
					-dmc "nurbsBooleanToolScript 2 2"
					booleanIntersectItem;

					$cmd = "SurfaceBooleanIntersectToolOptions";
					menuItem -optionBox true -image "nurbsShellIntersect.png"
						-annotation (getRunTimeCommandAnnotation($cmd))
						-c $cmd
						intersectOptItem;

			setParent -m ..;

			menuItem -d true -ld false;
		}

		$cmd = "RebuildSurfaces";
		menuItem
			-rtc $cmd
			-dmc "rebuildSurfaceToolScript 2"
			rebuildSrfItem;

			$cmd = "RebuildSurfacesOptions";
			menuItem -optionBox true -i "rebuildSurface.png"
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				rebuildSurfaceDialogItem; 

		$cmd = "ReverseSurfaceDirection";
		menuItem
			-rtc $cmd
			-dmc "reverseSurfaceToolScript 2"
			reverseItem;

			$cmd = "ReverseSurfaceDirectionOptions";
			menuItem -optionBox true -i "reverseSurface.png"
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				reverseDialogItem;
    
	setParent -m ..;
}