// ===========================================================================
// Copyright 2018 Autodesk, Inc. All rights reserved.
//
// Use of this software is subject to the terms of the Autodesk license
// agreement provided at the time of installation or download, or which
// otherwise accompanies this software in either electronic or hard copy form.
// ===========================================================================
//
//
// Creation Date:  17 June 2014
//
//
//  Procedure Name:
//      ModelingCurvesMenu
//
//  Description:
//		Create the MODELING->Curves menu
//
//  Input Arguments:
//      Parent window that menu will be a part of.
//
//  Return Value:
//      None.
//

global proc ModelingCurvesMenu( string $parent )
//
// Description:
//		Modeling Curves menu
//
{
	int $hasSurfaces = `isTrue SurfaceUIExists`;

	setParent -m $parent;
	if( `menu -q -ni $parent` != 0 ) {
		//
		//	Menu is built already - just return
		//
		return;
	}

	menuItem -divider true -dividerLabel (uiRes("m_ModelingCurvesMenu.kModifyDivider"));

		menuItem 
			-rtc "LockCurveLength";

		menuItem 
			-rtc "UnlockCurveLength";

		menuItem -d true -ld false;

		menuItem 
			-rtc "BendCurves"
			-dragMenuCommand "performBendCurves 2"
			-dragDoubleClickCommand "BendCurvesOptions";

			menuItem -optionBox true
				-annotation (getRunTimeCommandAnnotation("BendCurvesOptions"))
				-image "modifyBend.png"
				-command "BendCurvesOptions";

		menuItem 
			-rtc "CurlCurves"
			-dragMenuCommand "performCurlCurves 2"
			-dragDoubleClickCommand "CurlCurvesOptions";

			menuItem -optionBox true
				-annotation (getRunTimeCommandAnnotation("CurlCurvesOptions"))
				-image "modifyCurl.png"
				-command "CurlCurvesOptions";

		menuItem 
			-rtc "ScaleCurvature"
			-dragMenuCommand "performScaleCurvature 2"
			-dragDoubleClickCommand "ScaleCurvatureOptions";

			menuItem -optionBox true
				-annotation (getRunTimeCommandAnnotation("ScaleCurvatureOptions"))
				-image "modifyScaleCurvature.png"
				-command "ScaleCurvatureOptions";

		menuItem 
			-rtc "SmoothHairCurves"
			-dragMenuCommand "performSmoothHairCurves 2"
			-dragDoubleClickCommand "SmoothHairCurvesOptions";

			menuItem -optionBox true
				-annotation (getRunTimeCommandAnnotation("SmoothHairCurvesOptions"))
				-image "modifySmooth.png"
				-command "SmoothHairCurvesOptions";

		menuItem 
			-rtc "StraightenCurves"
			-dragMenuCommand "performStraighten 2"
			-dragDoubleClickCommand "StraightenCurvesOptions";

			menuItem -optionBox true
				-annotation (getRunTimeCommandAnnotation("StraightenCurvesOptions"))
				-image "modifyStraighten.png"
				-command "StraightenCurvesOptions";

	menuItem -divider true -dividerLabel (uiRes("m_ModelingCurvesMenu.kEditDivider"));	

		if ($hasSurfaces) {
			$cmd = "DuplicateCurve";
			menuItem
				-rtc $cmd
				-dmc "duplicateCurveToolScript 2"
				duplicateCurveItem ;

				$cmd = "DuplicateCurveOptions";
				menuItem -optionBox true
					-label (uiRes("m_ModelingCurvesMenu.kDupSurfCurvDialogLabel"))
					-annotation (getRunTimeCommandAnnotation($cmd))
					-i "duplicateCurve.png"
					-c $cmd
					duplicateCurveDialogItem;
		
			menuItem -d true -ld false;
		}

		$cmd = "AlignCurve";
		menuItem 
			-rtc $cmd
			-dmc "alignCurveToolScript 2"
			alignItem;

			$cmd = "AlignCurveOptions";
			menuItem -optionBox true 
				-label (uiRes("m_ModelingCurvesMenu.kAlignCurvesDialogLabel")) 
				-annotation (getRunTimeCommandAnnotation($cmd))
				-i "alignCurve.png" 
				-c $cmd
				alignDialogItem;
		
		$cmd = "AddPointsTool";
		menuItem 
			-rtc $cmd 
			crvAppendItem;

		$cmd = "AttachCurve";
		menuItem
			-rtc $cmd
			-dmc "attachCrvToolScript 2"
			attachCrvItem;

			$cmd = "AttachCurveOptions";
			menuItem -optionBox true
				-label (uiRes("m_ModelingCurvesMenu.kAttachCrvDialogLabel"))
				-annotation (getRunTimeCommandAnnotation($cmd))
				-i "attachCurves.png"
				-c $cmd
				attachCrvDialog;

		$cmd = "DetachCurve";
		menuItem
			-rtc $cmd
			-dmc "detachCurveToolScript 2"
			detachItem;

			$cmd = "DetachCurveOptions";
			menuItem -optionBox true -i "detachCurve.png"
				-label (uiRes("m_ModelingCurvesMenu.kDetachCrvDialogLabel"))
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				detachDialog;
			
		$cmd = "CurveEditTool";
		menuItem
			-rtc $cmd 
			crvEditorItem;

		menuItem 
			-rtc "MoveCurveSeam"
			moveCurveSeamItem;

		$cmd = "OpenCloseCurve";
		menuItem 
			-rtc $cmd
			-dmc "closeCurveToolScript 2"
			closeItem;
			$cmd = "OpenCloseCurveOptions";
			menuItem -optionBox true -i "closeGeom.png"
				-label (uiRes("m_ModelingCurvesMenu.kCloseCrvDialogLabel")) 
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				closeDialogItem;
		
		menuItem -d true -ld false;

		$cmd = "CurveFillet";
		menuItem
			-rtc $cmd
			-dmc "filletCurveToolScript 2"
			crvFilletItem;

			$cmd = "CurveFilletOptions";
			menuItem -optionBox true  -i "fillet.png"
				-label (uiRes("m_ModelingCurvesMenu.kFilletCrvDialogLabel")) 
	            -annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				crvFilletDialogItem;
	
		$cmd = "CutCurve";
		menuItem
			-rtc $cmd
			-dmc "cutCurveToolScript 2"
			cutCurvesItem;

			$cmd = "CutCurveOptions";
			menuItem -optionBox true -i "cutCurves.png"
				-label (uiRes("m_ModelingCurvesMenu.kCutCrvDialogLabel")) 
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				cutCurveDialogItem;

		$cmd = "IntersectCurve";
		menuItem
			-rtc $cmd
			-dmc "intersectCurveToolScript 2"
			intersectCurvesItem;
			$cmd = "IntersectCurveOptions";
			menuItem -optionBox true -i "intersectCurves.png"
				-label (uiRes("m_ModelingCurvesMenu.kIntersectCrvDialogLabel")) 
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				intersectCurveDialogItem;

		menuItem -d true -ld false;

		if ($hasSurfaces){
			menuItem 
				-label (uiRes("m_ModelingCurvesMenu.kExtendCurvesLabel")) 
				-sm 1 -to 1 -aob true;
		}

			$cmd = "ExtendCurve";
			menuItem
				-rtc $cmd
				-dmc "extendCurveToolScript 2"
				extendCurveItem;

				$cmd = "ExtendCurveOptions";
				menuItem -optionBox true -i "extend.png"
					-label (uiRes("m_ModelingCurvesMenu.kExtendCrvDialogLabel")) 
					-annotation (getRunTimeCommandAnnotation($cmd))
					-c $cmd
					extendCurveDialogItem;
			
			if ($hasSurfaces){
				$cmd = "ExtendCurveOnSurface";
				menuItem 
					-rtc $cmd
					-dmc "extendCosCurveToolScript 2"
					extendCosCurveItem;
					$cmd = "ExtendCurveOnSurfaceOptions";
					menuItem -optionBox true -i "extendCos.png"
						-label (uiRes("m_ModelingCurvesMenu.kExtendCOSDialogLabel")) 
						-annotation (getRunTimeCommandAnnotation($cmd))
						-c $cmd
						extendCosCurveDialogItem;
			
			setParent -m .. ;
			}

		$cmd = "InsertKnot";
		menuItem
			-rtc $cmd
			-dmc "insertCurveToolScript 2"
			insertItem;
		
			$cmd = "InsertKnotOptions";
			menuItem -optionBox true -i "insertKnot.png"
				-label (uiRes("m_ModelingCurvesMenu.kInsertKnotDialogLabel"))
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				insertDialog;

		if ($hasSurfaces){
			menuItem 
			  -label (uiRes("m_ModelingCurvesMenu.kOffsetCurveLabel"))  
			  -sm 1 -to 1 -aob true;
		}

			$cmd = "OffsetCurve";
			menuItem
				-rtc $cmd
				-dmc "offsetCurveToolScript 2"
				offsetCrvItem;

				$cmd = "OffsetCurveOptions";
				menuItem -optionBox true -i "offsetCurve.png"
					-label (uiRes("m_ModelingCurvesMenu.kOffsetCrvDialogLabel")) 
					-annotation (getRunTimeCommandAnnotation($cmd))
					-c $cmd
					offsetCurveDialogItem;
    		
			if ($hasSurfaces){
				$cmd = "OffsetCurveOnSurface";
				menuItem
					-rtc $cmd
					-dmc "offsetCosToolScript 2"
					offsetCosItem;

					$cmd = "OffsetCurveOnSurfaceOptions";
					menuItem -optionBox true -i "offsetCos.png"
						-label (uiRes("m_ModelingCurvesMenu.kOffsetCOSDialogLabel")) 
						-annotation (getRunTimeCommandAnnotation($cmd))
						-c $cmd
						offsetCosDialogItem;

			setParent -m ..;
			}

		menuItem -d true -ld false;

		$cmd = "CVHardness";
		menuItem
			-rtc $cmd
			-dmc "cvHardnessToolScript 2"
			hardenItem;

			$cmd = "CVHardnessOptions";
			menuItem -optionBox true
				-label (uiRes("m_ModelingCurvesMenu.kCVHardnessDialogLabel")) 
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				-i "cvHardness.png"
				hardenDialogItem;

		$cmd = "FitBSpline";
		menuItem
			-rtc $cmd
			-dmc "fitBsplineToolScript 2"
			fitBsplineItem;

			$cmd = "FitBSplineOptions";
			menuItem -optionBox true -i "fitBSpline.png"
				-label (uiRes("m_ModelingCurvesMenu.kFitBsplineDialogAnnot")) 
	            -annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				fitBsplineDialogItem;

		$cmd = "ProjectTangent";
		menuItem
			-rtc $cmd
			-dmc "projectTangentToolScript 2" 
			projectTangentItem;

			$cmd = "ProjectTangentOptions";
			menuItem -optionBox true 
				-label (uiRes("m_ModelingCurvesMenu.kProjTanDialogLabel")) 
				-annotation (getRunTimeCommandAnnotation($cmd))
				-i "projectTangent.png" 
				-c $cmd 
				projectTangentDialogItem;
		
		$cmd = "SmoothCurve";
		menuItem
			-rtc $cmd
			-dmc "smoothCurveToolScript 2"
			smoothItem;

			$cmd = "SmoothCurveOptions";
			menuItem -optionBox true
				-label (uiRes("m_ModelingCurvesMenu.kSmoothCrvDialogLabel")) 
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				-i "smoothCurve.png"
				smoothDialogItem;

		menuItem -d true -ld false;

		menuItem -label (uiRes("m_ModelingCurvesMenu.kBezierCrvLabel"))
			-sm 1 -to 1 -aob false;

			menuItem -label (uiRes("m_ModelingCurvesMenu.kBezierPresetsLabel"))
					-sm 1 -to 1 -aob false;

				menuItem -rtc "BezierPresetBezier"
					-enableCommandRepeat 1
					;

				menuItem -rtc "BezierPresetBezierCorner"
					-enableCommandRepeat 1
					;

				menuItem -rtc "BezierPresetCorner"
					-enableCommandRepeat 1
					;

			setParent -m ..;	// anchor presets

			menuItem -label (uiRes("m_ModelingCurvesMenu.kBezierTangentOptions"))
					-sm 1 -to 1 -aob false;

				menuItem -rtc "BezierSetAnchorSmooth"
					-enableCommandRepeat 1
					;

				menuItem -rtc "BezierSetAnchorBroken"
					-enableCommandRepeat 1
					;

				menuItem -rtc "BezierSetAnchorEven"
					-enableCommandRepeat 1
					;

				menuItem -rtc "BezierSetAnchorUneven"
					-enableCommandRepeat 1
					;

			setParent -m ..;	// tangent options
		setParent -m ..;	// bezier curves

		menuItem -d true -ld false;

		$cmd = "RebuildCurve";
		menuItem
			-rtc $cmd
			-dmc "rebuildCurveToolScript 2"
			rebuildCrvItem;

			$cmd = "RebuildCurveOptions";
			menuItem -optionBox true -i "rebuildCurve.png"
				-label (uiRes("m_ModelingCurvesMenu.kRebuildCrvDialogLabel")) 
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				rebuildCurveDialogItem;
			
		$cmd = "ReverseCurve";
		menuItem
			-rtc $cmd
			-dmc "reverseCurveToolScript 2"
			reverseItem;

			$cmd = "ReverseCurveOptions";
			menuItem -optionBox true -i "reverse.png"
				-label (uiRes("m_ModelingCurvesMenu.kReverseCrvDialogLabel")) 
				-annotation (getRunTimeCommandAnnotation($cmd))
				-c $cmd
				reverseDialogItem;

	setParent -m .. ;
}