// ===========================================================================
// Copyright 2018 Autodesk, Inc. All rights reserved.
//
// Use of this software is subject to the terms of the Autodesk license
// agreement provided at the time of installation or download, or which
// otherwise accompanies this software in either electronic or hard copy form.
// ===========================================================================
//
//
// Creation Date:  26 June 1998
//
//
//  Procedure Name:
//      ModEditCurvesMenu
//
//  Description:
//		Create the MODELLING->Edit Curves menu
//
//  Input Arguments:
//      parent to parent the menu to.
//
//  Return Value:
//      None.
//

proc modEditCurvesMenuLabel( int $hasSurfaces )
{

	if( $hasSurfaces ) {
		if( `optionVar -q modelWithToolDuplCurve` ) {
			menuItem -e
				-label (uiRes("m_ModEditCurvesMenu.kDupSurfCrvToolLabel")) 
				-annotation (uiRes("m_ModEditCurvesMenu.kDupSurfCrvToolAnnot"))
				duplicateCurveItem ;
			menuItem -e
				-label (uiRes("m_ModEditCurvesMenu.kDupSurfCrvToolDialogLabel"))
				-annotation (uiRes("m_ModEditCurvesMenu.kDupSurfCrvToolDialogAnnot"))
				duplicateCurveDialogItem;
		}
		else {
			menuItem -e
				-label (uiRes("m_ModEditCurvesMenu.kDupSurfCrvLabel")) 
				-annotation (uiRes("m_ModEditCurvesMenu.kDupSurfCrvAnnot"))
				duplicateCurveItem ;
			menuItem -e
				-label (uiRes("m_ModEditCurvesMenu.kDupSurfCurvDialogLabel"))
				-annotation (uiRes("m_ModEditCurvesMenu.kDupSurfCrvDialogAnnot"))
				duplicateCurveDialogItem;
		}
	}

	if( `optionVar -q modelWithToolAttachCurve` ) {
		menuItem -e
		  -label (uiRes("m_ModEditCurvesMenu.kAttachCrvToolLabel")) 
		  -annotation (uiRes("m_ModEditCurvesMenu.kAttachCrvToolAnnot"))
		  attachCrvItem;
		menuItem -e
		  -label (uiRes("m_ModEditCurvesMenu.kAttachCrvToolDialogLabel"))
		  -annotation (uiRes("m_ModEditCurvesMenu.kAttachCrvToolDialogAnnot"))
		  attachCrvDialog;
	}
	else {
		menuItem -e
		  -label (uiRes("m_ModEditCurvesMenu.kAttachCrvLabel")) 
		  -annotation (uiRes("m_ModEditCurvesMenu.kAttachCrvAnnot"))
		  attachCrvItem;
		menuItem -e
		  -label (uiRes("m_ModEditCurvesMenu.kAttachCrvDialogLabel"))
		  -annotation (uiRes("m_ModEditCurvesMenu.kAttachCrvDialogAnnot"))
		  attachCrvDialog;
	}

	if( `optionVar -q modelWithToolAlignCurve` ) {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kAlignCrvToolLabel"))  
			-annotation (uiRes("m_ModEditCurvesMenu.kAlignCrvToolAnnot")) 
			alignItem;
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kAlignCrvToolDialogLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kAlignCrvToolDialogAnnot")) 
			alignDialogItem;
	}
	else {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kAlignCrvLabel"))  
			-annotation (uiRes("m_ModEditCurvesMenu.kAlignCrvAnnot")) 
			alignItem;
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kAlignCrvDialogLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kAlignCrvDialogAnnot")) 
			alignDialogItem;
	}

	if( `optionVar -q modelWithToolDetachCurve` ) {
		menuItem -e
		  -label (uiRes("m_ModEditCurvesMenu.kDetachCrvToolLabel")) 
		  -annotation (uiRes("m_ModEditCurvesMenu.kDetachCrvToolAnnot"))
		  detachItem;
		menuItem -e
		  -label (uiRes("m_ModEditCurvesMenu.kDetachCrvToolDialogLabel"))
		  -annotation (uiRes("m_ModEditCurvesMenu.kDetachCrvToolDialogAnnot"))
		  detachDialog;
	}
	else {
		menuItem -e
		  -label (uiRes("m_ModEditCurvesMenu.kDetachCrvLabel")) 
		  -annotation (uiRes("m_ModEditCurvesMenu.kDetachCrvAnnot"))
		  detachItem;
		menuItem -e
		  -label (uiRes("m_ModEditCurvesMenu.kDetachCrvDialogLabel"))
		  -annotation (uiRes("m_ModEditCurvesMenu.kDetachCrvDialogAnnot"))
		  detachDialog;
	}

	if( `optionVar -q modelWithToolInsertCurve` ) {
		menuItem -e
		  -label (uiRes("m_ModEditCurvesMenu.kInsertKnotToolLabel")) 
		  -annotation 
          (uiRes("m_ModEditCurvesMenu.kInsertKnotToolAnnot"))
		  insertItem;
		menuItem -e
		  -label (uiRes("m_ModEditCurvesMenu.kInsertKnotToolDialogLabel"))
		  -annotation (uiRes("m_ModEditCurvesMenu.kInsertKnotToolDialogAnnot"))
		  insertDialog;
	}
	else {
		menuItem -e
		  -label (uiRes("m_ModEditCurvesMenu.kInsertKnotLabel")) 
		  -annotation 
          (uiRes("m_ModEditCurvesMenu.kInsertKnotAnnot"))
		  insertItem;
		menuItem -e
		  -label (uiRes("m_ModEditCurvesMenu.kInsertKnotDialogLabel"))
		  -annotation (uiRes("m_ModEditCurvesMenu.kInsertKnotDialogAnnot"))
		  insertDialog;
	}

	if( `optionVar -q modelWithToolFilletCurve` ) {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kFilletCrvToolLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kFilletCrvToolAnnot")) 
			crvFilletItem;
        menuItem -e
            -label (uiRes("m_ModEditCurvesMenu.kFilletCrvToolDialogLabel")) 
            -annotation (uiRes("m_ModEditCurvesMenu.kFilletCrvToolDialogAnnot")) 
			crvFilletDialogItem;
	}
	else {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kFilletCrvLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kFilletCrvAnnot")) 
			crvFilletItem;
        menuItem -e
            -label (uiRes("m_ModEditCurvesMenu.kFilletCrvDialogLabel")) 
            -annotation (uiRes("m_ModEditCurvesMenu.kFilletCrvDialogAnnot")) 
			crvFilletDialogItem;
	}

	if( `optionVar -q modelWithToolOffsetCurve` ) {
        menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kOffsetCrvToolLabel")) 
			-annotation 
            (uiRes("m_ModEditCurvesMenu.kOffsetCrvToolAnnot"))
			offsetCrvItem;

        menuItem -e
            -label (uiRes("m_ModEditCurvesMenu.kOffsetCrvToolDialogLabel")) 
            -annotation (uiRes("m_ModEditCurvesMenu.kOffsetCrvToolDialogAnnot")) 
            offsetCurveDialogItem;
	}
	else {
        menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kOffsetCrvLabel")) 
			-annotation 
            (uiRes("m_ModEditCurvesMenu.kOffsetCrvAnnot"))
			offsetCrvItem;

        menuItem -e
            -label (uiRes("m_ModEditCurvesMenu.kOffsetCrvDialogLabel")) 
            -annotation (uiRes("m_ModEditCurvesMenu.kOffsetCrvDialogAnnot")) 
            offsetCurveDialogItem;
	}

	if( $hasSurfaces ) {
		if( `optionVar -q modelWithToolOffsetCoS` ) {
			menuItem -e
				-label (uiRes("m_ModEditCurvesMenu.kOffsetCOSToolLabel")) 
				-annotation 
                (uiRes("m_ModEditCurvesMenu.kOffsetCOSToolAnnot"))
				offsetCosItem;
			menuItem -e
				-label (uiRes("m_ModEditCurvesMenu.kOffsetCOSToolDialogLabel")) 
				-annotation (uiRes("m_ModEditCurvesMenu.kOffsetCOSToolDialogAnnot")) 
				offsetCosDialogItem;
		}
		else {
			menuItem -e
				-label (uiRes("m_ModEditCurvesMenu.kOffsetCOSLabel")) 
				-annotation 
                (uiRes("m_ModEditCurvesMenu.kOffsetCOSAnnot"))
				offsetCosItem;
			menuItem -e
				-label (uiRes("m_ModEditCurvesMenu.kOffsetCOSDialogLabel")) 
				-annotation (uiRes("m_ModEditCurvesMenu.kOffsetCOSDialogAnnot")) 
				offsetCosDialogItem;
		}
	}

	if( `optionVar -q modelWithToolExtendCurve` ) {
        menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kExtendCrvToolLabel")) 
            -annotation (uiRes("m_ModEditCurvesMenu.kExtendCrvToolAnnot"))
            extendCurveItem;
        menuItem -e
            -label 
            (uiRes("m_ModEditCurvesMenu.kExtendCrvToolDialogLabel")) 
            -annotation 
            (uiRes("m_ModEditCurvesMenu.kExtendCrvToolDialogAnnot")) 
            extendCurveDialogItem;
	}
	else {
        menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kExtendCrvLabel")) 
            -annotation (uiRes("m_ModEditCurvesMenu.kExtendCrvAnnot")) 
            extendCurveItem;
        menuItem -e
            -label 
            (uiRes("m_ModEditCurvesMenu.kExtendCrvDialogLabel")) 
            -annotation 
            (uiRes("m_ModEditCurvesMenu.kExtendCrvDialogAnnot")) 
            extendCurveDialogItem;
	}

	if( $hasSurfaces ) {
		if( `optionVar -q modelWithToolExtendCosCurve` ) {
			menuItem -e
				-label (uiRes("m_ModEditCurvesMenu.kExtendCOSToolLabel")) 
				-annotation (uiRes("m_ModEditCurvesMenu.kExtendCOSToolAnnot"))
				extendCosCurveItem;
			menuItem -e
				-label (uiRes("m_ModEditCurvesMenu.kExtendCOSToolDialogLabel")) 
				-annotation (uiRes("m_ModEditCurvesMenu.kExtendCOSToolDialogAnnot")) 
				extendCosCurveDialogItem;
		}
		else {
			menuItem -e
				-label (uiRes("m_ModEditCurvesMenu.kExtendCOSLabel")) 
				-annotation (uiRes("m_ModEditCurvesMenu.kExtendCOSAnnot"))
				extendCosCurveItem;
			menuItem -e
				-label (uiRes("m_ModEditCurvesMenu.kExtendCOSDialogLabel")) 
				-annotation (uiRes("m_ModEditCurvesMenu.kExtendCOSDialogAnnot")) 
				extendCosCurveDialogItem;
		}
	}

	if( `optionVar -q modelWithToolCloseCurve` ) {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kCloseCrvToolLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kCloseCrvToolAnnot")) 
			closeItem;
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kCloseCrvToolDialogLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kCloseCrvToolDialogAnnot")) 
			closeDialogItem;
	}
	else {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kCloseCrvLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kCloseCrvAnnot")) 
			closeItem;
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kCloseCrvDialogLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kCloseCrvDialogAnnot")) 
			closeDialogItem;
	}

	if( `optionVar -q modelWithToolReverseCurve` ) {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kReverseCrvToolLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kReverseCrvToolAnnot")) 
			reverseItem;

		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kReverseCrvToolDialogLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kReverseCrvToolDialogAnnot")) 
			reverseDialogItem;
	}
	else {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kReverseCrvLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kReverseCrvAnnot")) 
			reverseItem;

		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kReverseCrvDialogLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kReverseCrvDialogAnnot")) 
			reverseDialogItem;
	}

	if( `optionVar -q modelWithToolRebuildCurve` ) {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kRebuildCrvToolLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kRebuildCrvToolAnnot"))
			rebuildCrvItem;
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kRebuildCrvToolDialogLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kRebuildCrvToolDialogAnnot")) 
			rebuildCurveDialogItem;
	}
	else {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kRebuildCrvLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kRebuildCrvAnnot")) 
			rebuildCrvItem;
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kRebuildCrvDialogLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kRebuildCrvDialogAnnot")) 
			rebuildCurveDialogItem;
	}

	if( `optionVar -q modelWithToolCutCurve` ) {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kCutCrvToolLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kCutCrvToolAnnot")) 
			cutCurvesItem;
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kCutCrvToolDialogLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kCutCrvToolDialogAnnot")) 
			cutCurveDialogItem;
	}
	else {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kCutCrvLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kCutCrvAnnot")) 
			cutCurvesItem;
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kCutCrvDialogLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kCutCrvDialogAnnot")) 
			cutCurveDialogItem;
	}

	if( `optionVar -q modelWithToolIntersectCurve` ) {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kIntersectCrvToolLabel")) 
			-annotation 
            (uiRes("m_ModEditCurvesMenu.kIntersectCrvToolAnot"))
			intersectCurvesItem;
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kIntersectCrvToolDialogLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kIntersectCrvToolDialogAnnot")) 
			intersectCurveDialogItem;
	}
	else {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kIntersectCrvLabel")) 
			-annotation 
            (uiRes("m_ModEditCurvesMenu.kIntersectCrvAnnot"))
			intersectCurvesItem;
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kIntersectCrvDialogLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kIntersectCrvDialogAnnot")) 
			intersectCurveDialogItem;
	}

	if( `optionVar -q modelWithToolFitBspline` ) {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kFitBsplineToolLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kFitBsplineToolAnnot"))
			fitBsplineItem;

        menuItem -e
            -label (uiRes("m_ModEditCurvesMenu.kFitBsplineToolDialogLabel")) 
            -annotation (uiRes("m_ModEditCurvesMenu.kFitBsplineToolDialogAnnot")) 
            fitBsplineDialogItem;
	}
	else {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kFitBsplineLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kFitBsplineAnnot"))
			fitBsplineItem;

        menuItem -e
            -label (uiRes("m_ModEditCurvesMenu.kFitBsplineDialogAnnot")) 
            -annotation (uiRes("m_ModEditCurvesMenu.kFitBsplineDialogLabel")) 
            fitBsplineDialogItem;
	}

	if( `optionVar -q modelWithToolSmoothCurve` ) {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kSmoothCrvToolLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kSmoothCrvToolAnnot")) 
			smoothItem;
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kSmoothCrvToolDialogLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kSmoothCrvToolDialogAnnot")) 
			smoothDialogItem;
	}
	else {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kSmoothCrvLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kSmoothCrvAnnot")) 
			smoothItem;
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kSmoothCrvDialogLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kSmoothCrvDialogAnnot")) 
			smoothDialogItem;
	}

	if( `optionVar -q modelWithToolCvHardness` ) {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kCVHardnessToolLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kCVHardnessToolAnnot")) 
			hardenItem;
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kCVHardnessToolDialogLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kCVHardnessToolDialogAnnot")) 
			hardenDialogItem;
	}
	else {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kCVHardnessLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kCVHardnessAnnot")) 
			hardenItem;
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kCVHardnessDialogLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kCVHardnessDialogAnnot")) 
			hardenDialogItem;
	}

	if( `optionVar -q modelWithToolProjectTangent` ) {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kProjTanToolLabel"))  
			-annotation 
            (uiRes("m_ModEditCurvesMenu.kProjTanToolAnnot"))
			projectTangentItem;
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kProjTanToolDialogLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kProjTanToolDialogAnnot")) 
			projectTangentDialogItem;
	}
	else {
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kProjTanLabel"))  
			-annotation (uiRes("m_ModEditCurvesMenu.kProjTanAnnot"))
			projectTangentItem;
		menuItem -e
			-label (uiRes("m_ModEditCurvesMenu.kProjTanDialogLabel")) 
			-annotation (uiRes("m_ModEditCurvesMenu.kProjTanDialogAnnot")) 
			projectTangentDialogItem;
	}
}

global proc ModEditCurvesMenu( string $parent )
{
	// If this ever changes to true, we have to make sure
	// we don't dim the tools.  So, don't just change the
	// value.  Milan S.
	int $dimWhenNoSelect = 0;

	int $hasSurfaces = `isTrue SurfaceUIExists`;

	setParent -m $parent;
	if( `menu -q -ni $parent` != 0 ) {
		//
		//	Menu is built already - just relabel and return
		//
		modEditCurvesMenuLabel( $hasSurfaces );
		return;
	}

	// Duplicate Surface Curves.
	//

	if( $hasSurfaces ) {
		menuItem
			-c "DuplicateCurve"
			-dmc "duplicateCurveToolScript 2"
			-i "duplicateCurve.png"
			duplicateCurveItem ;
		menuItem -optionBox true
			-i "duplicateCurve.png"
			-c "DuplicateCurveOptions"
			duplicateCurveDialogItem;
		if( $dimWhenNoSelect )
			dimWhen -f "SomethingSelected" ($parent+"|duplicateCurveItem");

		menuItem -d true ;
	}

	// Attach, Detach, Align, Open(close)
    //

	menuItem
		-c "AttachCurve"
		-dmc "attachCrvToolScript 2"
		-i "attachCurves.png"
		attachCrvItem;
	menuItem -optionBox true
		-i "attachCurves.png"
		-c "AttachCurveOptions"
		attachCrvDialog;
	if( $dimWhenNoSelect )
		dimWhen -f "SomethingSelected" ($parent+"|attachCrvItem");

	menuItem
		-c "DetachCurve"
		-dmc "detachCurveToolScript 2"
		-i "detachCurve.png"
		detachItem;
	menuItem -optionBox true -i "detachCurve.png"
		-c "DetachCurveOptions"
		detachDialog;
	if( $dimWhenNoSelect )
		dimWhen -f "SomethingSelected" ($parent+"|detachItem");

	menuItem -label (uiRes("m_ModEditCurvesMenu.kAlignCurvesLabel"))  
		-c "AlignCurve"
		-dmc "alignCurveToolScript 2"
		-i "alignCurve.png"
		alignItem;
	menuItem -optionBox true 
		-i "alignCurve.png" 
		-c "AlignCurveOptions"
		alignDialogItem;
	if( $dimWhenNoSelect )
		dimWhen -f "SomethingSelected" ($parent+"|alignItem");

	menuItem -label (uiRes("m_ModEditCurvesMenu.kOpenCloseCrvLabel")) 
		-c "OpenCloseCurve"
		-dmc "closeCurveToolScript 2"
		-i "closeGeom.png"
		closeItem;
	menuItem -optionBox true -i "closeGeom.png"
		-c "OpenCloseCurveOptions"
		closeDialogItem;
	if( $dimWhenNoSelect )
		dimWhen -f "SomethingSelected" ($parent+"|closeItem");

	// move seam mel script
	//
	menuItem -label (uiRes("m_ModEditCurvesMenu.kMoveSeamLabel"))  
		-annotation (uiRes("m_ModEditCurvesMenu.kMoveSeamAnnot")) 
		-image "newSeamLocation.png" 
		-c "moveNurbsCurveSeam" moveCurveSeamItem;

	menuItem -d true ;

	// cut + intersect + curve fillet.
	//

	menuItem
		-c "CutCurve"
		-dmc "cutCurveToolScript 2"
		-i "cutCurves.png"
		cutCurvesItem;
	menuItem -optionBox true -i "cutCurves.png"
		-c "CutCurveOptions"
		cutCurveDialogItem;
	if( $dimWhenNoSelect )
   		dimWhen -f "SomethingSelected" ($parent+"|cutCurvesItem");

	menuItem
		-c "IntersectCurve"
		-dmc "intersectCurveToolScript 2"
		-i "intersectCurves.png"
		intersectCurvesItem;
	menuItem -optionBox true -i "intersectCurves.png"
		-c "IntersectCurveOptions"
		intersectCurveDialogItem;
	if( $dimWhenNoSelect )
   		dimWhen -f "SomethingSelected" ($parent+"|intersectCurvesItem");

	menuItem
        -c "CurveFillet"
		-dmc "filletCurveToolScript 2"
        -i "fillet.png"
		crvFilletItem;
	menuItem -optionBox true  -i "fillet.png"
		-c "CurveFilletOptions"
		crvFilletDialogItem;
    if( $dimWhenNoSelect )
        dimWhen -f "SomethingSelected" ($parent+"|crvFilletItem");

	menuItem -d true ;

	// Insert + Extend + Offset + reverse.
	//
	menuItem
        -c "InsertKnot"
        -dmc "insertCurveToolScript 2"
        -i "insertKnot.png"
        insertItem;
	menuItem -optionBox true -i "insertKnot.png"
        -c "InsertKnotOptions"
        insertDialog;
    if( $dimWhenNoSelect )
        dimWhen -f "SomethingSelected" ($parent+"|insertItem");

	if( $hasSurfaces ) {
		menuItem -label (uiRes("m_ModEditCurvesMenu.kExtendCurvesLabel")) -sm 1 -to 1 -aob true;
	}
        menuItem
            -c "ExtendCurve"
            -dmc "extendCurveToolScript 2"
            -i "extend.png"
            extendCurveItem;
        menuItem -optionBox true -i "extend.png"
            -c "ExtendCurveOptions"
            extendCurveDialogItem;
        if( $dimWhenNoSelect )
            dimWhen -f "SomethingSelected" ($parent+"|extendCurveItem");

	if( $hasSurfaces ) {
        menuItem 
            -label (uiRes("m_ModEditCurvesMenu.kExtendCurveOnSurfLabel")) 
            -c "ExtendCurveOnSurface"
            -dmc "extendCosCurveToolScript 2"
            -i "extendCos.png"
            extendCosCurveItem;
        menuItem -optionBox true -i "extendCos.png"
            -c "ExtendCurveOnSurfaceOptions"
            extendCosCurveDialogItem;
        if( $dimWhenNoSelect )
            dimWhen -f "SomethingSelected" ($parent+"|extendCosCurveItem");
		setParent -m .. ;
	}

	if( $hasSurfaces ) {
		menuItem 
          -label (uiRes("m_ModEditCurvesMenu.kOffsetCurveLabel"))  -sm 1 -to 1 -aob true;
	}
        menuItem
			-c "OffsetCurve"
			-dmc "offsetCurveToolScript 2"
			-i "offsetCurve.png"
        offsetCrvItem;

        menuItem -optionBox true -i "offsetCurve.png"
            -c "OffsetCurveOptions"
            offsetCurveDialogItem;

    	if( $dimWhenNoSelect )
			dimWhen -f "SomethingSelected" ($parent+"|offsetCrvItem");

	if( $hasSurfaces ) {
		menuItem
			-c "OffsetCurveOnSurface"
			-dmc "offsetCosToolScript 2"
			-i "offsetCos.png"
			offsetCosItem;
		menuItem -optionBox true -i "offsetCos.png"
			-c "OffsetCurveOnSurfaceOptions"
			offsetCosDialogItem;
			if( $dimWhenNoSelect )
			dimWhen -f "SomethingSelected" ($parent+"|offsetCosItem");
		setParent -m ..;
	}

	menuItem
        -c "ReverseCurve"
        -dmc "reverseCurveToolScript 2"
        -i "reverse.png"
        reverseItem;

    menuItem -optionBox true -i "reverse.png"
        -c "ReverseCurveOptions"
        reverseDialogItem;
    if( $dimWhenNoSelect )
        dimWhen -f "SomethingSelected" ($parent+"|reverseItem");
    menuItem -d true ;


	// rebuild curve
	//
	menuItem
		-c "RebuildCurve"
		-dmc "rebuildCurveToolScript 2"
		-i "rebuildCurve.png"
		rebuildCrvItem;
	menuItem -optionBox true -i "rebuildCurve.png"
		-c "RebuildCurveOptions"
		rebuildCurveDialogItem;
	if( $dimWhenNoSelect )
		dimWhen -f "SomethingSelected" ($parent+"|rebuildCrvItem");

	menuItem -d true ;

	// fit B-spline + smooth + cv Hardness.
	//

	menuItem
        -c "FitBSpline"
        -dmc "fitBsplineToolScript 2"
        -i "fitBSpline.png"
        fitBsplineItem;

	menuItem -optionBox true -i "fitBSpline.png"
		-c "FitBSplineOptions"
		fitBsplineDialogItem;

    if( $dimWhenNoSelect )
        dimWhen -f "SomethingSelected" ($parent+"|fitBsplineItem");


	menuItem
		-c "SmoothCurve"
		-dmc "smoothCurveToolScript 2"
		-i "smoothCurve.png"
		smoothItem;
	menuItem -optionBox true
		-c "SmoothCurveOptions"
		-i "smoothCurve.png"
		smoothDialogItem;
	if( $dimWhenNoSelect )
		dimWhen -f "SomethingSelected" ($parent+"|smoothItem");

	menuItem
        -c "CVHardness"
        -dmc "cvHardnessToolScript 2"
		-i "cvHardness.png"
        hardenItem;
    menuItem -optionBox true
        -c "CVHardnessOptions"
		-i "cvHardness.png"
        hardenDialogItem;
    if( $dimWhenNoSelect )
        dimWhen -f "SomethingSelected" ($parent+"|hardenItem");

    menuItem -d true ;

	// add points + edit curve.
	//
	$cmd = "AddPointsTool";
	menuItem -label (uiRes("m_ModEditCurvesMenu.kAddPointsLabel"))  
		-annotation (getRunTimeCommandAnnotation($cmd))
		-image "curveAddPt.png"
		-c $cmd crvAppendItem;
	$cmd = "CurveEditTool";
	menuItem -label (uiRes("m_ModEditCurvesMenu.kCrvEditLabel")) 
		-annotation (getRunTimeCommandAnnotation($cmd))
		-image "curveEditor.png"
		-c $cmd crvEditorItem;

	menuItem -d true;

	// project Tangent
	//
	menuItem
		-c "ProjectTangent"
		-dmc "projectTangentToolScript 2" 
		-i "projectTangent.png"
		projectTangentItem;
	menuItem -optionBox true 
		-i "projectTangent.png" 
		-c "ProjectTangentOptions" 
		projectTangentDialogItem;
	if( $dimWhenNoSelect )
		dimWhen -f "SomethingSelected" ($parent+"|projectTangentItem");

	menuItem -d true;

	// hair-inspired curve editing tools
	string $curveModsItem = `menuItem -label 
           (uiRes("m_ModEditCurvesMenu.kModifyCrvLabel"))  
           -sm 1 -to 1 -aob true modifyCurvesItem`;
	ModifyCurvesSubMenu $curveModsItem;
	setParent -m .. ;

	// bezier curves
	//
	menuItem -label (uiRes("m_ModEditCurvesMenu.kBezierCrvLabel"))
			-sm 1 -to 1 -aob false;

	menuItem -label (uiRes("m_ModEditCurvesMenu.kBezierPresetsLabel"))
			-sm 1 -to 1 -aob false;

	string $cmdBez = "bezierAnchorPreset -p 0;";
	string $cmdBezCorner = "bezierAnchorPreset -p 1;";
	string $cmdCorner = "bezierAnchorPreset -p 2;";

	menuItem
		-label (uiRes("m_ModEditCurvesMenu.kBezierPresetBezier"))
		-command $cmdBez
		-enableCommandRepeat 1
		;

	menuItem
		-label (uiRes("m_ModEditCurvesMenu.kBezierPresetBezierCorner"))
		-command $cmdBezCorner
		-enableCommandRepeat 1
		;

	menuItem
		-label (uiRes("m_ModEditCurvesMenu.kBezierPresetCorner"))
		-command $cmdCorner
		-enableCommandRepeat 1
		;

	setParent -m ..;	// anchor presets

	menuItem -label (uiRes("m_ModEditCurvesMenu.kBezierTangentOptions"))
			-sm 1 -to 1 -aob false;

	string $cmdSmooth = "bezierAnchorState -sm 1";
	string $cmdBroken = "bezierAnchorState -sm 0";
	string $cmdEven = "bezierAnchorState -ev 1";
	string $cmdUneven = "bezierAnchorState -ev 0";

	menuItem
		-label (uiRes("m_ModEditCurvesMenu.kBezierSetAnchorSmooth"))
		-command $cmdSmooth
		-enableCommandRepeat 1
		;

	menuItem
		-label (uiRes("m_ModEditCurvesMenu.kBezierSetAnchorBroken"))
		-command $cmdBroken
		-enableCommandRepeat 1
		;

	menuItem
		-label (uiRes("m_ModEditCurvesMenu.kBezierSetAnchorEven"))
		-command $cmdEven
		-enableCommandRepeat 1
		;

	menuItem
		-label (uiRes("m_ModEditCurvesMenu.kBezierSetAnchorUneven"))
		-command $cmdUneven
		-enableCommandRepeat 1
		;

	setParent -m ..;	// tangent options
	setParent -m ..;	// bezier curves

	// curve conversion
	//

	menuItem -label (uiRes("m_ModEditCurvesMenu.kSelectionLabel"))  
             -sm 1 -to 1 -aob true;

	menuItem
		-label (uiRes("m_ModEditCurvesMenu.kSelectCrvCVsLabel")) 
		-annotation (getRunTimeCommandAnnotation ("SelectCurveCVsAll"))
		-image "selectCVs.png"
		-command "SelectCurveCVsAll"
		allCurveCVsItem;

	menuItem
		-label (uiRes("m_ModEditCurvesMenu.kSelectCrvCVsFirstLabel")) 
		-annotation (getRunTimeCommandAnnotation ("SelectCurveCVsFirst"))
		-image "selectFirstCV.png"
		-command "SelectCurveCVsFirst"
		firstCurveCVsItem;

	menuItem
		-label (uiRes("m_ModEditCurvesMenu.kSelectCrvCVsLastLabel")) 
		-annotation (getRunTimeCommandAnnotation ("SelectCurveCVsLast"))
		-image "selectLastCV.png"
		-command "SelectCurveCVsLast"
		lastCurveCVsItem;

	menuItem
		-label (uiRes("m_ModEditCurvesMenu.kClusterCrvLabel")) 
		-annotation (getRunTimeCommandAnnotation ("ClusterCurve"))
		-image "selectCluster.png"
		-command "ClusterCurve"
		clusterCurveItem;

	setParent -m .. ;

	modEditCurvesMenuLabel( $hasSurfaces );
}