// ===========================================================================
// Copyright 2018 Autodesk, Inc. All rights reserved.
//
// Use of this software is subject to the terms of the Autodesk license
// agreement provided at the time of installation or download, or which
// otherwise accompanies this software in either electronic or hard copy form.
// ===========================================================================
displayString -replace -value "Move along U" m_uvTkBuildTransformOptions.kAbsUAnn;
displayString -replace -value "Move along UV" m_uvTkBuildTransformOptions.kAbsUVAnn;
displayString -replace -value "Move along V" m_uvTkBuildTransformOptions.kAbsVAnn;
displayString -replace -value "Distribute" m_uvTkBuildTransformOptions.kDistribute;
displayString -replace -value "Distribute selected UVs evenly along either the U or V axis\nRMB: Distribute selected UVs evenly along either the U or V axis, using a custom distribution distance" m_uvTkBuildTransformOptions.kDistributeAnnot;
displayString -replace -value "Move down along V (Down arrow)" m_uvTkBuildTransformOptions.kDownAnn;
displayString -replace -value "Move down-left along UV" m_uvTkBuildTransformOptions.kDownLeftAnn;
displayString -replace -value "Move up-right along UV" m_uvTkBuildTransformOptions.kDownRightAnn;
displayString -replace -value "Edit Pivot" m_uvTkBuildTransformOptions.kEditPivot;
displayString -replace -value "Activate pivot editing mode (D)" m_uvTkBuildTransformOptions.kEditPivotAnn;
displayString -replace -value "Shift + LMB: Tool Settings" m_uvTkBuildTransformOptions.kExtraLMBOpts;
displayString -replace -value "Flip" m_uvTkBuildTransformOptions.kFlip;
displayString -replace -value "Flip components horizontally or vertically according to the selection's pivot location\nRMB: Flip using global UV coordinate space" m_uvTkBuildTransformOptions.kFlipAnnot;
displayString -replace -value "Flip horizontally" m_uvTkBuildTransformOptions.kFlipUAnnot;
displayString -replace -value "Flip vertically" m_uvTkBuildTransformOptions.kFlipVAnnot;
displayString -replace -value "Get" m_uvTkBuildTransformOptions.kGet;
displayString -replace -value "Get average texel density from selected faces" m_uvTkBuildTransformOptions.kGetAnnot;
displayString -replace -value "Grab" m_uvTkBuildTransformOptions.kGrab;
displayString -replace -value "Move UVs along a shell in any direction" m_uvTkBuildTransformOptions.kGrabAnnot;
displayString -replace -value "Lattice" m_uvTkBuildTransformOptions.kLattice;
displayString -replace -value "Modify the layout of multiple components using a lattice deformer" m_uvTkBuildTransformOptions.kLatticeAnnot;
displayString -replace -value "Move left along U (Left arrow)" m_uvTkBuildTransformOptions.kLeftAnn;
displayString -replace -value "Map Size:" m_uvTkBuildTransformOptions.kMapSize;
displayString -replace -value "Set the size of the map used as reference when getting texel density" m_uvTkBuildTransformOptions.kMapSizeInput;
displayString -replace -value "Move" m_uvTkBuildTransformOptions.kMoveLabel;
displayString -replace -value "Move components in increments (J)" m_uvTkBuildTransformOptions.kMoveStepSnapAnn;
displayString -replace -value "Tools" m_uvTkBuildTransformOptions.kMoveTools;
displayString -replace -value "Move value" m_uvTkBuildTransformOptions.kNudgeFactorAnn;
displayString -replace -value "Load a default or saved preset" m_uvTkBuildTransformOptions.kNudgeFactorsAnnot;
displayString -replace -value "Off" m_uvTkBuildTransformOptions.kOff;
displayString -replace -value "On" m_uvTkBuildTransformOptions.kOn;
displayString -replace -value "Pinch" m_uvTkBuildTransformOptions.kPinch;
displayString -replace -value "Sharpen soft UV edges" m_uvTkBuildTransformOptions.kPinchAnnot;
displayString -replace -value "Move the selection's pivot location to the bottom-middle" m_uvTkBuildTransformOptions.kPivotBottomAnn;
displayString -replace -value "Move the selection's pivot location to the bottom-left corner" m_uvTkBuildTransformOptions.kPivotBottomLeftAnn;
displayString -replace -value "Move the selection's pivot location to the bottom-right corner" m_uvTkBuildTransformOptions.kPivotBottomRightAnn;
displayString -replace -value "Center the selection's pivot" m_uvTkBuildTransformOptions.kPivotCenterAnn;
displayString -replace -value "Pivot" m_uvTkBuildTransformOptions.kPivotLabel;
displayString -replace -value "Move the selection's pivot location to the middle-left" m_uvTkBuildTransformOptions.kPivotLeftAnn;
displayString -replace -value "Move the selection's pivot location to the middle-right" m_uvTkBuildTransformOptions.kPivotRightAnn;
displayString -replace -value "Use the selection's bounding box for snapping pivot positions" m_uvTkBuildTransformOptions.kPivotSelectionAnn;
displayString -replace -value "Use a specified UV area for snapping pivot positions" m_uvTkBuildTransformOptions.kPivotUVAreaAnn;
displayString -replace -value "Maximum U" m_uvTkBuildTransformOptions.kPivotUVRangeMaxU;
displayString -replace -value "Maximum V" m_uvTkBuildTransformOptions.kPivotUVRangeMaxV;
displayString -replace -value "Minimum U" m_uvTkBuildTransformOptions.kPivotUVRangeMinU;
displayString -replace -value "Minimum V" m_uvTkBuildTransformOptions.kPivotUVRangeMinV;
displayString -replace -value "Move the selection's pivot location to the top-middle" m_uvTkBuildTransformOptions.kPivotUpAnn;
displayString -replace -value "Move the selection's pivot location to the top-left corner" m_uvTkBuildTransformOptions.kPivotUpLeftAnn;
displayString -replace -value "Move the selection's pivot location to the top-right corner" m_uvTkBuildTransformOptions.kPivotUpRightAnn;
displayString -replace -value "Prevent Negative Scale" m_uvTkBuildTransformOptions.kPreventNegativeScale;
displayString -replace -value "Prevent negative scaling of components (no negative values)" m_uvTkBuildTransformOptions.kPreventNegativeScaleAnnot;
displayString -replace -value "Move components relatively or absolutely" m_uvTkBuildTransformOptions.kRelAbsToggleAnn;
displayString -replace -value "Reset" m_uvTkBuildTransformOptions.kReset;
displayString -replace -value "Reset pivot position" m_uvTkBuildTransformOptions.kResetAnn;
displayString -replace -value "Retain component spacing" m_uvTkBuildTransformOptions.kRetainCompSpacing;
displayString -replace -value "Retain spacing between components when moving with snapping enabled" m_uvTkBuildTransformOptions.kRetainCompSpacingAnn;
displayString -replace -value "Move right along U (Right arrow)" m_uvTkBuildTransformOptions.kRightAnn;
displayString -replace -value "Rotate counterclockwise using rotate value\nMMB: Rotate 45 degrees CCW\nRMB: Rotate 15 degrees CCW" m_uvTkBuildTransformOptions.kRotateCCWAnnot;
displayString -replace -value "Rotate clockwise using rotate value\nMMB: Rotate 45 degrees CW\nRMB: Rotate 15 degrees CW" m_uvTkBuildTransformOptions.kRotateCWAnnot;
displayString -replace -value "Rotate value (RMB to save current value as a preset)" m_uvTkBuildTransformOptions.kRotateFactorAnn;
displayString -replace -value "Load a default or saved preset" m_uvTkBuildTransformOptions.kRotateFactorsAnnot;
displayString -replace -value "Rotate" m_uvTkBuildTransformOptions.kRotateLabel;
displayString -replace -value "Rotate components in increments (J)" m_uvTkBuildTransformOptions.kRotateStepSnapAnn;
displayString -replace -value "RMB: Save current value as a preset" m_uvTkBuildTransformOptions.kSaveAsPreset;
displayString -replace -value "Save Custom Value" m_uvTkBuildTransformOptions.kSaveCustomValue;
displayString -replace -value "Scale using scale value\nRMB: Scale by 0.5000 units" m_uvTkBuildTransformOptions.kScaleAnnot;
displayString -replace -value "Scale value (RMB to save current value as a preset)" m_uvTkBuildTransformOptions.kScaleFactor;
displayString -replace -value "Load a default or saved preset" m_uvTkBuildTransformOptions.kScaleFactorsAnnot;
displayString -replace -value "Scale" m_uvTkBuildTransformOptions.kScaleLabel;
displayString -replace -value "Scale components in increments (J)" m_uvTkBuildTransformOptions.kScaleStepSnapAnn;
displayString -replace -value "Scale components uniformly (UV) or non-uniformly (U or V)" m_uvTkBuildTransformOptions.kScaleUVAnnot;
displayString -replace -value "Selection" m_uvTkBuildTransformOptions.kSelection;
displayString -replace -value "Set" m_uvTkBuildTransformOptions.kSet;
displayString -replace -value "Scale selected UV shells until they match the specified texel density" m_uvTkBuildTransformOptions.kSetAnnot;
displayString -replace -value "Smear" m_uvTkBuildTransformOptions.kSmear;
displayString -replace -value "Pull the surface in the direction of your stroke" m_uvTkBuildTransformOptions.kSmearAnnot;
displayString -replace -value "Step Snap:" m_uvTkBuildTransformOptions.kStepSnapLabel;
displayString -replace -value "Symmetrize" m_uvTkBuildTransformOptions.kSymmetrize;
displayString -replace -value "Mirror UVs across an axis" m_uvTkBuildTransformOptions.kSymmetrizeAnnot;
displayString -replace -value "Select faces and click \"Get\" to enter texel density value (RMB to save current value as a preset)" m_uvTkBuildTransformOptions.kTexelDensityAnnot;
displayString -replace -value "Texel<br>Density<br>(px/unit)" m_uvTkBuildTransformOptions.kTexelDensityLabel;
displayString -replace -value "U" m_uvTkBuildTransformOptions.kU;
displayString -replace -value "U:" m_uvTkBuildTransformOptions.kULabel;
displayString -replace -value "UV" m_uvTkBuildTransformOptions.kUV;
displayString -replace -value "UV Area:" m_uvTkBuildTransformOptions.kUVArea;
displayString -replace -value "Move up along V (Up arrow)" m_uvTkBuildTransformOptions.kUpAnn;
displayString -replace -value "Move up-left along UV" m_uvTkBuildTransformOptions.kUpLeftAnn;
displayString -replace -value "Move up-right along UV" m_uvTkBuildTransformOptions.kUpRightAnn;
displayString -replace -value "V" m_uvTkBuildTransformOptions.kV;
displayString -replace -value "V:" m_uvTkBuildTransformOptions.kVLabel;