// ===========================================================================
// Copyright 2018 Autodesk, Inc. All rights reserved.
//
// Use of this software is subject to the terms of the Autodesk license
// agreement provided at the time of installation or download, or which
// otherwise accompanies this software in either electronic or hard copy form.
// ===========================================================================
displayString -replace -value "Add Expression" m_teContextMenus.kCTEAddExprToLayerAttr;
displayString -replace -value "Add an expression to drive the layer attribute" m_teContextMenus.kCTEAddExprToLayerAttrAnnot;
displayString -replace -value "Add Selection" m_teContextMenus.kCTEAddSelectionToLayer;
displayString -replace -value "Add all keyable attributes in selected object to current layer" m_teContextMenus.kCTEAddSelectionToLayerAnnot;
displayString -replace -value "Select all nodes" m_teContextMenus.kCTEAllSelectLayerAttrExecNode;
displayString -replace -value "Select all roster level & interpolator nodes containing attributes in the current layer" m_teContextMenus.kCTEAllSelectLayerAttrExecNodeAnnot;
displayString -replace -value "Add Selected Attributes" m_teContextMenus.kCTEClipAddAttributes;
displayString -replace -value "Add selected attributes to the clip and associated Anim Source" m_teContextMenus.kCTEClipAddAttributesAnnot;
displayString -replace -value "Attributes" m_teContextMenus.kCTEClipAttributes;
displayString -replace -value "Clip Edge Edit Mode" m_teContextMenus.kCTEClipEdgeEditModeSubMenu;
displayString -replace -value "Scale End to Current Frame" m_teContextMenus.kCTEClipEditScaleEnd;
displayString -replace -value "Scale clip end to current frame" m_teContextMenus.kCTEClipEditScaleEndAnnot;
displayString -replace -value "Scale Start to Current Frame" m_teContextMenus.kCTEClipEditScaleStart;
displayString -replace -value "Scale clip start to current frame" m_teContextMenus.kCTEClipEditScaleStartAnnot;
displayString -replace -value "Split Clip at Current Frame" m_teContextMenus.kCTEClipEditSplit;
displayString -replace -value "Split clip at current frame" m_teContextMenus.kCTEClipEditSplitAnnot;
displayString -replace -value "Trim After" m_teContextMenus.kCTEClipEditTrimEnd;
displayString -replace -value "Trim clip after current frame" m_teContextMenus.kCTEClipEditTrimEndAnnot;
displayString -replace -value "Trim Before" m_teContextMenus.kCTEClipEditTrimStart;
displayString -replace -value "Trim clip before current frame" m_teContextMenus.kCTEClipEditTrimStartAnnot;
displayString -replace -value "Extend Parent" m_teContextMenus.kCTEClipExtendParent;
displayString -replace -value "Extend parent to fit clip" m_teContextMenus.kCTEClipExtendParentAnnot;
displayString -replace -value "Layers" m_teContextMenus.kCTEClipLayers;
displayString -replace -value "Mute" m_teContextMenus.kCTEClipMuted;
displayString -replace -value "Mute/unmute clip" m_teContextMenus.kCTEClipMutedAnnot;
displayString -replace -value "Remove Selected Attributes" m_teContextMenus.kCTEClipRemoveAttributes;
displayString -replace -value "Remove selected attributes from the clip" m_teContextMenus.kCTEClipRemoveAttributesAnnot;
displayString -replace -value "Rename Clip..." m_teContextMenus.kCTEClipRenameClip;
displayString -replace -value "Rename" m_teContextMenus.kCTEClipRenameClipAnnot;
displayString -replace -value "Reset Timing" m_teContextMenus.kCTEClipResetTiming;
displayString -replace -value "Reset clip timing to the initial animation source values" m_teContextMenus.kCTEClipResetTimingAnnot;
displayString -replace -value "Clip Roots" m_teContextMenus.kCTEClipRoots;
displayString -replace -value "Bake to New Clip" m_teContextMenus.kCTEContainerBake;
displayString -replace -value "Bake to New Clip and Delete" m_teContextMenus.kCTEContainerBakeAndDelete;
displayString -replace -value "Bake the clip into new clip and delete original clip" m_teContextMenus.kCTEContainerBakeAndDeleteAnnot;
displayString -replace -value "Bake the clip to new clip" m_teContextMenus.kCTEContainerBakeAnnot;
displayString -replace -value "Bake to Scene" m_teContextMenus.kCTEContainerBakeToScene;
displayString -replace -value "Bake to Scene and Delete" m_teContextMenus.kCTEContainerBakeToSceneAndDelete;
displayString -replace -value "Bake the clip to the scene and delete orignal clip" m_teContextMenus.kCTEContainerBakeToSceneAndDeleteAnnot;
displayString -replace -value "Bake the clip to scene" m_teContextMenus.kCTEContainerBakeToSceneAnnot;
displayString -replace -value "Convert to Time Warp" m_teContextMenus.kCTEContainerConvertSpeedCurve;
displayString -replace -value "Convert to time warp" m_teContextMenus.kCTEContainerConvertSpeedCurveAnnot;
displayString -replace -value "Convert to Speed Curve" m_teContextMenus.kCTEContainerConvertTimeWarp;
displayString -replace -value "Convert to speed curve" m_teContextMenus.kCTEContainerConvertTimeWarpAnnot;
displayString -replace -value "Create Relocator" m_teContextMenus.kCTEContainerCreateRelocator;
displayString -replace -value "Create a transform to offset the selected clip" m_teContextMenus.kCTEContainerCreateRelocatorAnnot;
displayString -replace -value "Create Transition" m_teContextMenus.kCTEContainerCreateTransition;
displayString -replace -value "Creates transition intervals between the selected clips" m_teContextMenus.kCTEContainerCreateTransitionpAnnot;
displayString -replace -value "Delete" m_teContextMenus.kCTEContainerDeleteCurve;
displayString -replace -value "Delete warp curve" m_teContextMenus.kCTEContainerDeleteCurveAnnot;
displayString -replace -value "Edit Relocator" m_teContextMenus.kCTEContainerEditRelocatorRoots;
displayString -replace -value "Edit relocator roots of the selected clip" m_teContextMenus.kCTEContainerEditRelocatorRootsAnnot;
displayString -replace -value "Edit" m_teContextMenus.kCTEContainerEditSpeedCurve;
displayString -replace -value "Open Graph Editor to edit warp curve" m_teContextMenus.kCTEContainerEditSpeedCurveAnnot;
displayString -replace -value "Graph Weight Curve" m_teContextMenus.kCTEContainerEditWeightCurve;
displayString -replace -value "Open Graph Editor to edit the weight curve" m_teContextMenus.kCTEContainerEditWeightCurveAnnot;
displayString -replace -value "Match Relocators..." m_teContextMenus.kCTEContainerMatchRelocator;
displayString -replace -value "Align clips" m_teContextMenus.kCTEContainerMatchRelocatorAnnot;
displayString -replace -value "Flatten Layers" m_teContextMenus.kCTEContainerMergeLayers;
displayString -replace -value "Merge clip layers" m_teContextMenus.kCTEContainerMergeLayersAnnot;
displayString -replace -value "Remove Relocator" m_teContextMenus.kCTEContainerRemoveRelocator;
displayString -replace -value "Delete the selected clip relocator" m_teContextMenus.kCTEContainerRemoveRelocatorAnnot;
displayString -replace -value "Reset" m_teContextMenus.kCTEContainerResetCurve;
displayString -replace -value "Reset warp curve" m_teContextMenus.kCTEContainerResetCurveAnnot;
displayString -replace -value "Reset Relocator" m_teContextMenus.kCTEContainerResetRelocator;
displayString -replace -value "Reset the selected clip relocator position" m_teContextMenus.kCTEContainerResetRelocatorAnnot;
displayString -replace -value "Remove Transition" m_teContextMenus.kCTEContainerResetTransition;
displayString -replace -value "Remove transition intervals between the selected clips" m_teContextMenus.kCTEContainerResetTransitionpAnnot;
displayString -replace -value "Select Relocator" m_teContextMenus.kCTEContainerSelectRelocator;
displayString -replace -value "Select the relocator of the selected clip" m_teContextMenus.kCTEContainerSelectRelocatorAnnot;
displayString -replace -value "Create and Edit Speed Curve" m_teContextMenus.kCTEContainerSpeedCurveCreate;
displayString -replace -value "Create and edit speed curve" m_teContextMenus.kCTEContainerSpeedCurveCreateAnnot;
displayString -replace -value "Enabled" m_teContextMenus.kCTEContainerSpeedCurveEnable;
displayString -replace -value "Enable clip warping" m_teContextMenus.kCTEContainerSpeedCurveEnableAnnot;
displayString -replace -value "Create and Edit Time Warp" m_teContextMenus.kCTEContainerTimeWarpCreate;
displayString -replace -value "Create and edit time warp" m_teContextMenus.kCTEContainerTimeWarpCreateAnnot;
displayString -replace -value "Copy" m_teContextMenus.kCTECopyClip;
displayString -replace -value "Custom: Linear" m_teContextMenus.kCTECreateCustomCrossfadeLinear;
displayString -replace -value "Create custom linear crossfade curve" m_teContextMenus.kCTECreateCustomCrossfadeLinearAnnot;
displayString -replace -value "Custom: Spline" m_teContextMenus.kCTECreateCustomCrossfadeSpline;
displayString -replace -value "Create custom spline crossfade curve" m_teContextMenus.kCTECreateCustomCrossfadeSplineAnnot;
displayString -replace -value "Group" m_teContextMenus.kCTECreateGroup;
displayString -replace -value "Group the current selection into a group clip" m_teContextMenus.kCTECreateGroupAnnot;
displayString -replace -value "Create Layer (Additive)" m_teContextMenus.kCTECreateLayerAdditive;
displayString -replace -value "Create a layer in additive mode" m_teContextMenus.kCTECreateLayerAdditiveAnnot;
displayString -replace -value "Create Layer (Override)" m_teContextMenus.kCTECreateLayerOverride;
displayString -replace -value "Create a layer in override mode" m_teContextMenus.kCTECreateLayerOverrideAnnot;
displayString -replace -value "Custom" m_teContextMenus.kCTECrossfadeModeCustom;
displayString -replace -value "Linear (default)" m_teContextMenus.kCTECrossfadeModeDefault;
displayString -replace -value "Stepped" m_teContextMenus.kCTECrossfadeModeHoldLeft;
displayString -replace -value "Stepped Next" m_teContextMenus.kCTECrossfadeModeHoldRight;
displayString -replace -value "Stepped Middle" m_teContextMenus.kCTECrossfadeModeStep;
displayString -replace -value "Crossfade" m_teContextMenus.kCTECrossfading;
displayString -replace -value "Choose custom relocator roots from clip roots" m_teContextMenus.kCTECustomRelocatorRoots;
displayString -replace -value "Cut" m_teContextMenus.kCTECut;
displayString -replace -value "Cut selected clip" m_teContextMenus.kCTECutAnnot;
displayString -replace -value "Use default root for relocator" m_teContextMenus.kCTEDefaultRelocatorRoot;
displayString -replace -value "Delete" m_teContextMenus.kCTEDelete;
displayString -replace -value "Delete selected clip" m_teContextMenus.kCTEDeleteAnnot;
displayString -replace -value "Delete Expression" m_teContextMenus.kCTEDeleteExprInLayerAttr;
displayString -replace -value "Delete the expression connected to this layer attribute" m_teContextMenus.kCTEDeleteExprInLayerAttrAnnot;
displayString -replace -value "Delete Layer" m_teContextMenus.kCTEDeleteLayer;
displayString -replace -value "Delete layer" m_teContextMenus.kCTEDeleteLayerAnnot;
displayString -replace -value "Edit Custom Curve..." m_teContextMenus.kCTEEditCrossfadeCurve;
displayString -replace -value "Open custom crossfading curve in the Graph Editor" m_teContextMenus.kCTEEditCrossfadeCurveAnnot;
displayString -replace -value "Edit Expression" m_teContextMenus.kCTEEditExprInLayerAttr;
displayString -replace -value "Edit expression connected to this layer attribute" m_teContextMenus.kCTEEditExprInLayerAttrAnnot;
displayString -replace -value "Enable User-Defined Ghosts" m_teContextMenus.kCTEEnableUserDefinedGhost;
displayString -replace -value "Enable/disable user-defined ghost" m_teContextMenus.kCTEEnableUserDefinedGhostAnnot;
displayString -replace -value "Export All Clips to FBX..." m_teContextMenus.kCTEExportAllClipsToFBX;
displayString -replace -value "Export Selected..." m_teContextMenus.kCTEExportSelectedClip;
displayString -replace -value "Presets" m_teContextMenus.kCTEExprPreset;
displayString -replace -value "Enable" m_teContextMenus.kCTEGhostEnable;
displayString -replace -value "Enable clip ghosting" m_teContextMenus.kCTEGhostEnableAnnot;
displayString -replace -value "Set/Edit User-Defined Ghosts..." m_teContextMenus.kCTEGhostRootEdit;
displayString -replace -value "Set/edit a user-defined ghost" m_teContextMenus.kCTEGhostRootEditAnnot;
displayString -replace -value "Ghost" m_teContextMenus.kCTEGhostSubMenu;
displayString -replace -value "Group" m_teContextMenus.kCTEGroupDivider;
displayString -replace -value "Insert Track into Group" m_teContextMenus.kCTEGroupInsertTrack;
displayString -replace -value "Insert new animation track inside this group" m_teContextMenus.kCTEGroupInsertTrackAnnot;
displayString -replace -value "Open in Local Time Tab" m_teContextMenus.kCTEGroupTabView;
displayString -replace -value "Create tab view for this group" m_teContextMenus.kCTEGroupTabViewAnnot;
displayString -replace -value "Set as keyable layer" m_teContextMenus.kCTEKeyingTargetForLayer;
displayString -replace -value "Set layer as keying target" m_teContextMenus.kCTEKeyingTargetForLayerAnnot;
displayString -replace -value "Create Additive" m_teContextMenus.kCTELayerCreateAdditive;
displayString -replace -value "Create Additive Layer" m_teContextMenus.kCTELayerCreateAdditiveAnnot;
displayString -replace -value "Create Override" m_teContextMenus.kCTELayerCreateOverride;
displayString -replace -value "Create Override Layer" m_teContextMenus.kCTELayerCreateOverrideAnnot;
displayString -replace -value "Edit" m_teContextMenus.kCTELayerEditDivider;
displayString -replace -value "Mode" m_teContextMenus.kCTELayerModeDivider;
displayString -replace -value "Mute Layer" m_teContextMenus.kCTELayerMuteLayer;
displayString -replace -value "Mute layer under cursor" m_teContextMenus.kCTELayerMuteLayerAnnot;
displayString -replace -value "Mute/Solo" m_teContextMenus.kCTELayerMuteSolo;
displayString -replace -value "Selection" m_teContextMenus.kCTELayerSelectionDivider;
displayString -replace -value "Set Key" m_teContextMenus.kCTELayerSetKey;
displayString -replace -value "Set key on clip layer" m_teContextMenus.kCTELayerSetKeyAnnot;
displayString -replace -value "Solo Layer" m_teContextMenus.kCTELayerSoloLayer;
displayString -replace -value "Solo layer under cursor" m_teContextMenus.kCTELayerSoloLayerAnnot;
displayString -replace -value "Unmute Layer" m_teContextMenus.kCTELayerUnMuteLayer;
displayString -replace -value "Unmute layer under cursor" m_teContextMenus.kCTELayerUnMuteLayerAnnot;
displayString -replace -value "Undo Layer Soloing" m_teContextMenus.kCTELayerUndoSoloLayer;
displayString -replace -value "Solo layer under cursor" m_teContextMenus.kCTELayerUndoSoloLayerAnnot;
displayString -replace -value "Make Animation Source Unique" m_teContextMenus.kCTEMakeAnimSourceUnique;
displayString -replace -value "Makes the source driving the clip unique to the clip" m_teContextMenus.kCTEMakeAnimSourceUniqueAnnot;
displayString -replace -value "Flatten Layers" m_teContextMenus.kCTEMergeLayers;
displayString -replace -value "Merge clip layers" m_teContextMenus.kCTEMergeLayersAnnot;
displayString -replace -value "No Clip Selected" m_teContextMenus.kCTENoClipSelected;
displayString -replace -value "No Namespace Can Be Mapped" m_teContextMenus.kCTENoNamespace;
displayString -replace -value "No roots found in the clip" m_teContextMenus.kCTENoRootsFound;
displayString -replace -value "No roots selected" m_teContextMenus.kCTENoRootsSelected;
displayString -replace -value "Add Noise" m_teContextMenus.kCTENoisePresetExpre;
displayString -replace -value "Add a noise expression preset" m_teContextMenus.kCTENoisePresetExpreAnnot;
displayString -replace -value "Paste" m_teContextMenus.kCTEPaste;
displayString -replace -value "Paste" m_teContextMenus.kCTEPasteClip;
displayString -replace -value "Relocate" m_teContextMenus.kCTERelocate;
displayString -replace -value "Relocator Selection" m_teContextMenus.kCTERelocatorSelection;
displayString -replace -value "Remap and Create Clip from Namespace" m_teContextMenus.kCTERemapClipToNS;
displayString -replace -value "Remove Attribute" m_teContextMenus.kCTERemoveLayerAttribute;
displayString -replace -value "Remove attribute from layer" m_teContextMenus.kCTERemoveLayerAttributeAnnot;
displayString -replace -value "Remove Selection" m_teContextMenus.kCTERemoveSelectionFromLayer;
displayString -replace -value "Remove all keyable attributes in selected object from current layer" m_teContextMenus.kCTERemoveSelectionFromLayerAnnot;
displayString -replace -value "Retime" m_teContextMenus.kCTERetime;
displayString -replace -value "Select Driven Objects" m_teContextMenus.kCTESelectDrivenObjects;
displayString -replace -value "Select objects driven by this clip" m_teContextMenus.kCTESelectDrivenObjectsAnnot;
displayString -replace -value "Select Node" m_teContextMenus.kCTESelectLayerAttrExecNode;
displayString -replace -value "Select the layer attributes roster level or interpolator node" m_teContextMenus.kCTESelectLayerAttrExecNodeAnnot;
displayString -replace -value "Selected roots for custom relocator" m_teContextMenus.kCTESelectedRoots;
displayString -replace -value "Additive" m_teContextMenus.kCTESetLayerModeAdditive;
displayString -replace -value "Change layer to 'Additive' mode" m_teContextMenus.kCTESetLayerModeAdditiveAnnot;
displayString -replace -value "Additive Override" m_teContextMenus.kCTESetLayerModeAdditiveOverride;
displayString -replace -value "Change layer to 'Additive Override' mode" m_teContextMenus.kCTESetLayerModeAdditiveOverrideAnnot;
displayString -replace -value "Override" m_teContextMenus.kCTESetLayerModeOverride;
displayString -replace -value "Change layer to 'Override' mode" m_teContextMenus.kCTESetLayerModeOverrideAnnot;
displayString -replace -value "Override Passthrough" m_teContextMenus.kCTESetLayerModeOverridePassthrough;
displayString -replace -value "Change layer to 'Override Passthrough' mode" m_teContextMenus.kCTESetLayerModeOverridePassthroughAnnot;
displayString -replace -value "Bake" m_teContextMenus.kCTESmartBaking;
displayString -replace -value "Create" m_teContextMenus.kCTETrackCreate;
displayString -replace -value "Animation Track" m_teContextMenus.kCTETrackCreateAnimTrack;
displayString -replace -value "Create a new animation track at the current track index" m_teContextMenus.kCTETrackCreateAnimTrackAnnot;
displayString -replace -value "Audio Track" m_teContextMenus.kCTETrackCreateAudioTrack;
displayString -replace -value "Create a new audio track at the current track index" m_teContextMenus.kCTETrackCreateAudioTrackAnnot;
displayString -replace -value "Delete Tracks" m_teContextMenus.kCTETrackDeleteTrack;
displayString -replace -value "Delete tracks" m_teContextMenus.kCTETrackDeleteTrackAnnot;
displayString -replace -value "Move" m_teContextMenus.kCTETrackMove;
displayString -replace -value "Move Selected Tracks Down" m_teContextMenus.kCTETrackMoveSelectedDown;
displayString -replace -value "Move selected track(s) one position down in the list" m_teContextMenus.kCTETrackMoveSelectedDownAnnot;
displayString -replace -value "Move Selected Tracks Up" m_teContextMenus.kCTETrackMoveSelectedUp;
displayString -replace -value "Move selected track(s) one position up in the list" m_teContextMenus.kCTETrackMoveSelectedUpAnnot;
displayString -replace -value "Mute/Solo" m_teContextMenus.kCTETrackMuteSolo;
displayString -replace -value "Muted" m_teContextMenus.kCTETrackMuted;
displayString -replace -value "Mute/unmute track" m_teContextMenus.kCTETrackMutedAnnot;
displayString -replace -value "Ungroup" m_teContextMenus.kCTEUngroup;
displayString -replace -value "Ungroup clips in the selected group(s)" m_teContextMenus.kCTEUngroupAnnot;
displayString -replace -value "Rename..." m_teContextMenus.kCTRenameLayer;
displayString -replace -value "Rename layer" m_teContextMenus.kCTRenameLayerAnnot;
displayString -replace -value "Hold" m_teContextMenus.kClipEditModeHold;
displayString -replace -value "Loop" m_teContextMenus.kClipEditModeLoop;
displayString -replace -value "Scale" m_teContextMenus.kClipEditModeScale;
displayString -replace -value "Trim" m_teContextMenus.kClipEditModeTrim;
displayString -replace -value "Import" m_teContextMenus.kContainerAudioImport;
displayString -replace -value "Add" m_teContextMenus.kContainerCreate;
displayString -replace -value "Import" m_teContextMenus.kContainerImport;
displayString -replace -value "Import Audio Clip..." m_teContextMenus.kImportAudioClip;
displayString -replace -value "Create audio clip" m_teContextMenus.kImportAudioClipAnnot;
displayString -replace -value "Create Animation Track" m_teContextMenus.kOutlinerTracksCreateAnimTrack;
displayString -replace -value "Create Audio Track" m_teContextMenus.kOutlinerTracksCreateAudioTrack;
displayString -replace -value "Add Animation from Scene Selection" m_teContextMenus.kTrackCreateContainerSelection;
displayString -replace -value "Add Pose from Scene Selection" m_teContextMenus.kTrackCreatePoseClip;
displayString -replace -value "Import Animation Clip..." m_teContextMenus.kTrackImportAnimationClip;
displayString -replace -value "Add to Soloed Tracks" m_teContextMenus.kTracksMuteSoloAddToSoloSelected;
displayString -replace -value "Add selected tracks to soloing" m_teContextMenus.kTracksMuteSoloAddToSoloSelectedAnnot;
displayString -replace -value "Solo Tracks" m_teContextMenus.kTracksMuteSoloSoloSelected;
displayString -replace -value "Solo only the selected tracks" m_teContextMenus.kTracksMuteSoloSoloSelectedAnnot;
displayString -replace -value "Undo Soloing" m_teContextMenus.kTracksMuteSoloUndoSolo;
displayString -replace -value "Unmute All Tracks" m_teContextMenus.kTracksMuteSoloUnmuteAll;