// ===========================================================================
// Copyright 2018 Autodesk, Inc. All rights reserved.
//
// Use of this software is subject to the terms of the Autodesk license
// agreement provided at the time of installation or download, or which
// otherwise accompanies this software in either electronic or hard copy form.
// ===========================================================================
//
//
//  Creation Date:  29 April 1997
//
//  Description:
//		Initialize the option values for offset curve on surface menu item.
//
//  Input Arguments:
//      int action
//		  0 - just execute the offset curve operation
//        1 - show the option box dialog
//		  2 - drag to shelf
//
//  Return Value:
//      None.
//

proc setOptionVars(int $forceFactorySettings)
{
	// Global or local tolerance:
	if( $forceFactorySettings || !`optionVar -exists offsetCosUseGlobalTol` ){
		optionVar -intValue offsetCosUseGlobalTol false;
	}

	//	Connect breaks (0=off 1=circular 2=linear).
	//
	if ($forceFactorySettings || !`optionVar -exists offsetCosConnectBreaks`) {
		optionVar -intValue offsetCosConnectBreaks 2;
	}

	//	Stitch (on-1 or off-0).
	//
	if ($forceFactorySettings || !`optionVar -exists offsetCosStitch`) {
		optionVar -intValue offsetCosStitch 1;
	}

	//	Cut loops (on-1 or off-0).
	//
	if ($forceFactorySettings || !`optionVar -exists offsetCosCutLoop`) {
		optionVar -intValue offsetCosCutLoop 0;
	}

	//	Offset distance.
	//
	if ($forceFactorySettings || !`optionVar -exists offsetCosDistance`) {
		optionVar -floatValue offsetCosDistance 1.0;
	}

	//	Tolerance control (on-1 or off-0 used for depth and bias).
	//
	if ($forceFactorySettings || !`optionVar -exists offsetCosTolerance`) {
		optionVar -floatValue offsetCosTolerance 0.01;
	}

	//	Subdivision density
	//
	if ($forceFactorySettings || !`optionVar -exists offsetCosSubdivDensity`) {
		optionVar -intValue offsetCosSubdivDensity 5;
	}

	// curve range
    if ($forceFactorySettings ||
        !`optionVar -exists offsetCosRangePartial`){
        optionVar -intValue offsetCosRangePartial 0;
    }

}

//
//  Procedure Name:
//      offsetCosSetup
//
//  Description:
//		Update the state of the option box UI to reflect the offsetCos
//		option values.
//
//  Input Arguments:
//      parent               - Top level parent layout of the option box UI.
//                             Required so that UI object names can be 
//                             successfully resolved.
//
//		forceFactorySettings - Whether the option values should be set to
//                             default values.
//
//  Return Value:
//      None.
//
global proc offsetCosSetup( string $parent,
							int $forceFactorySettings,
							string $goToTool )
{
	//	Retrieve the option settings
	//
	setOptionVars($forceFactorySettings);
	offsetCosToolSetup( $forceFactorySettings, $goToTool );

	setParent $parent;

	//	Query the optionVar's and set the values into the controls.

	// Global vs. local tolerance
	int $useGlobalTol = `optionVar -q offsetCosUseGlobalTol`;
	radioButtonGrp -e -sl (2 - $useGlobalTol) useGlobalTol;

	//	Distance
	//
	floatSliderGrp -edit 
		-value `optionVar -q offsetCosDistance`
		offsetCosDistanceFloatSliderGrp;

	//	Connect breaks.
	//
	int $doConnectBreaks = `optionVar -q offsetCosConnectBreaks`;
	if( 0 == $doConnectBreaks ) $doConnectBreaks = 3;
	radioButtonGrp -edit 
		-sl $doConnectBreaks
		offsetCosConnectBreaksRadioButtonGrp;

	//	Loop cutting.
	//
	int $doCutLoop = `optionVar -q offsetCosCutLoop`;
	radioButtonGrp -edit 
		-sl (2 - $doCutLoop)
		offsetCosCutLoopRadioButtonGrp;

	//	Subdivision density
	//
	intSliderGrp -edit 
		-value `optionVar -q offsetCosSubdivDensity`
		offsetCosSubdivDensityIntSliderGrp;

	//	Tolerance
	//
	floatSliderGrp -edit 
		-v `optionVar -q offsetCosTolerance`
		offsetCosTolerance;

	// curve range on inputs.
	//
	int $offsetCosRangePartial = `optionVar -q offsetCosRangePartial`+1 ;
	radioButtonGrp -edit -sl $offsetCosRangePartial 
		offsetCosRangeRadioButtonGrp ;		

	if( $useGlobalTol ) {
		tabLayout -e -selectTab noSlider useGlobalTolTab;
	}
	else {
		tabLayout -e -selectTab slider useGlobalTolTab;
	}

	if( "" != $goToTool ) { 
		checkBoxGrp -e -v1 `scriptCtx -q -euc $goToTool`
		  scriptToolExtraWidget;
		checkBoxGrp -e -v2 `scriptCtx -q -lac $goToTool`
		  scriptToolExtraWidget;
	}
}

//
//  Procedure Name:
//      offsetCosCallback
//
//  Description:
//		Update the option values with the current state of the option box UI.
//
//  Input Arguments:
//      parent - Top level parent layout of the option box UI.  Required so
//               that UI object names can be successfully resolved.
//
//		doIt   - Whether the command should execute.
//
//  Return Value:
//      None.
//
global proc offsetCosCallback(string $parent, int $doIt, string $goToTool)
{
	if( "" != $goToTool ) {
		optionVar -iv offsetCosEuc `scriptCtx -q -euc $goToTool`;
		optionVar -iv offsetCosLac `scriptCtx -q -lac $goToTool`;
	}
    setParent $parent;

	//	Set the optionVar's from the control values, and then
	//	perform the command.

	// get Values from controls.
	int $offsetCosRangePartial = `radioButtonGrp -q -sl offsetCosRangeRadioButtonGrp` - 1 ;
	optionVar -intValue offsetCosRangePartial $offsetCosRangePartial;

	// distance
	optionVar -floatValue offsetCosDistance
		`floatSliderGrp -q -value offsetCosDistanceFloatSliderGrp`;

	// connect breaks
	int $breaks = `radioButtonGrp -q -sl offsetCosConnectBreaksRadioButtonGrp`;
	if( 3 == $breaks ) $breaks = 0;
	optionVar -intValue offsetCosConnectBreaks $breaks;

	// loop cutting
	int $lc = 2 - `radioButtonGrp -q -sl offsetCosCutLoopRadioButtonGrp`;
	optionVar -intValue offsetCosCutLoop $lc;

	// subdivision density
	optionVar -intValue offsetCosSubdivDensity
		`intSliderGrp -q -value offsetCosSubdivDensityIntSliderGrp`;

	// tolerance
	optionVar -floatValue offsetCosTolerance
		`floatSliderGrp -q -v offsetCosTolerance`;

	// global vs. local:
	int $useGlobalTol = 2 - `radioButtonGrp -q -sl useGlobalTol`;
	optionVar -intValue offsetCosUseGlobalTol $useGlobalTol;

	if (1 == $doIt) {
		performOffsetCos( 0, $goToTool ); 
		string $tmpCmd = "performOffsetCos( 0, \"" + $goToTool + "\")";
		addToRecentCommandQueue $tmpCmd "Offset Curve On Surface";
	}
	else if( $doIt ) {
		setToolTo $goToTool;
	}
}

//
//  Procedure Name:
//      createoffsetCosUI
//
//  Description:
//		Fill the contents of the option box for offsetCos command.
//
//  Input Arguments:
//      The name of the parent layout.
//
//  Return Value:
//      None.
//
proc createOffsetCosUI(string $parent, int $inTheTool, string $goToTool)
{
   setParent $parent;

   floatSliderGrp -field on -fmn -1000. -fmx 1000. 
	   -min -10. -max 10. 
	   -label (uiRes("m_performOffsetCos.kOffsetDistance")) 
	   offsetCosDistanceFloatSliderGrp;

   radioButtonGrp -nrb 3 -sl 1 
	   -label (uiRes("m_performOffsetCos.kConnectBreaks")) 
	   -label1 (uiRes("m_performOffsetCos.kCircular"))  -da1 1
	   -label2 (uiRes("m_performOffsetCos.kLinear"))  -da2 2
	   -label3 (uiRes("m_performOffsetCos.kConnectBreaksOff"))  -da3 0
	   offsetCosConnectBreaksRadioButtonGrp;

   string $tabLayoutName = (`setParent -q` + "|offsetCosLoopCutOptions_Tabs");

   radioButtonGrp -nrb 2 -sl 1 
	   -label (uiRes("m_performOffsetCos.kLoopCutting")) 
	   -label1 (uiRes("m_performOffsetCos.kOn"))  -da1 1
	   -label2 (uiRes("m_performOffsetCos.kOff"))  -da2 0
	   offsetCosCutLoopRadioButtonGrp;
   
   intSliderGrp -field on -min 0 -max 10 
	   -fmn 0 -fmx 100 
	   -label (uiRes("m_performOffsetCos.kMaxSubdivisionDensity")) 
	   offsetCosSubdivDensityIntSliderGrp;

   radioButtonGrp -nrb 2 -label (uiRes("m_performOffsetCos.kUseTolerance")) 
	   -label1 (uiRes("m_performOffsetCos.kGlobal")) 
	   -label2 (uiRes("m_performOffsetCos.kLocal")) 
	   -on1 "tabLayout -e -selectTab noSlider useGlobalTolTab"
	   -on2 "tabLayout -e -selectTab slider useGlobalTolTab"
	   useGlobalTol;

   tabLayout -tabsVisible false useGlobalTolTab;
	   columnLayout slider;
		   floatSliderGrp -label (uiRes("m_performOffsetCos.kTolerance")) 
			   -min 0.001 -max 1.0 -fmn 0.00001 -fmx 10.0
			   offsetCosTolerance;
	   setParent ..;
	   columnLayout noSlider;
	   setParent ..;
   setParent ..;

   separator;

	// layout for add curve range, create as polygons.
    //
   radioButtonGrp -nrb 2 -label (uiRes("m_performOffsetCos.kCurveRange"))  
       -label1 (uiRes("m_performOffsetCos.kComplete"))  -da1 0 
       -label2 (uiRes("m_performOffsetCos.kPartial"))  -da2 1 -sl 1 offsetCosRangeRadioButtonGrp;

	if( $inTheTool ) {
		separator;
		checkBoxGrp -ncb 2 -label (uiRes("m_performOffsetCos.kToolBehavior")) 
		  -label1 (uiRes("m_performOffsetCos.kExitOnCompletion")) 
		  -v1 off
		  -on1 ("scriptCtx -e -euc true " + $goToTool)
		  -of1 ("scriptCtx -e -euc false " + $goToTool)

		  -label2 (uiRes("m_performOffsetCos.kAutoCompletion")) 
		  -v2 on
		  -on2 ("scriptCtx -e -lac true " + $goToTool)
		  -of2 ("scriptCtx -e -lac false " + $goToTool)
		  scriptToolExtraWidget;
	}
}

//
//  Procedure Name:
//      offsetCosOptions
//
//  Description:
//		Construct the option box UI.  Involves accessing the standard option
//		box and customizing the UI accordingly.
//
//  Input Arguments:
//      None.
//
//  Return Value:
//      None.
//
proc offsetCosOptions( int $inTheTool, string $goToTool )
{
	//	Name of the command for this option box.
	//
	string $commandName = "offsetCos";
	string $optionBoxTitle;
	if( $inTheTool ) {
		$optionBoxTitle = (uiRes("m_performOffsetCos.kOffsetSurfaceToolOptions"));
	}
	else {
		$optionBoxTitle = (uiRes("m_performOffsetCos.kOffsetSurfaceOptions"));
	}

	//	Build the option box actions.
	//
	string $callback = ($commandName + "Callback");
	string $setup = ($commandName + "Setup");

	global string $gOptionBoxActionToolItem;
	$gOptionBoxActionToolItem = "modelWithToolOffsetCoS";
	global string $gOptionBoxActionToolItemCB;
	$gOptionBoxActionToolItemCB = "offsetCosToolScript 3";

	//  The value returned is the name of the layout to be used as
	//	the parent for the option box UI.
	//
	string $layout = getOptionBox();
	setParent $layout;
	
	//	Pass the command name to the option box.
	//
	//	Any default option box behavior based on the command name is set 
	//	up with this call.
	//
	setOptionBoxCommandName("offsetCurveOnSurface");
	
	//	Activate the default UI template so that the layout of this 
	//	option box is consistent with the layout of the rest of the 
	//	application.
	//
	setUITemplate -pushTemplate DefaultTemplate;

	//	Turn on the wait cursor.
	//
	waitCursor -state 1;

	//	RECOMMENDATION:  Place the UI in a scroll layout.  If the 
	//	option box window is ever resized such that it's entire 
	//	contents is not visible then the scroll bars provided by the
	//	scroll layout will allow the user to access the hidden UI.
	//
	tabLayout -scr true -tv false;
	
	string $parent = `columnLayout -adjustableColumn 1`;

	//	Create the UI for the tab that is initially visible.
	//
	createOffsetCosUI($parent, $inTheTool, $goToTool);

	//	Turn off the wait cursor.
	//
	waitCursor -state 0;

	//	Deactivate the default UI template.
	//
	setUITemplate -popTemplate;

	//	Attach actions to those buttons that are applicable to the option
	//	box.  Note that the 'Close' button has a default action attached 
	//	to it that will hide the window.  If a a custom action is
	//	attached to the 'Close' button then be sure to call the 'hide the
	//	option box' procedure within the custom action so that the option
	//	box is hidden properly.

	//	'offsetCos' button.
	//
	string $applyBtn = getOptionBoxApplyBtn();
	if( $inTheTool ) {
		button -edit
			-label (uiRes("m_performOffsetCos.kOffsetTool")) 
			-command ($callback + " " + $parent + " 3 \"" + $goToTool + "\"")
			$applyBtn;
	}
	else {
		button -edit
			-label (uiRes("m_performOffsetCos.kOffset")) 
			-command ($callback + " " + $parent + " 1 \"" + $goToTool + "\"")
			$applyBtn;
	}

	//	'Save' button.
	//
	string $saveBtn = getOptionBoxSaveBtn();
	button -edit 
		-command ($callback + " " + $parent + " 0 \"" +
				  $goToTool + "\"; hideOptionBox")
		$saveBtn;

	//	'Reset' button.
	//
	string $resetBtn = getOptionBoxResetBtn();
	button -edit 
		-command ($setup + " " + $parent + " 1 \"" + $goToTool + "\"")
		$resetBtn;

	//	Set the option box title.
	//
	setOptionBoxTitle($optionBoxTitle);

	//	Customize the 'Help' menu item text.
	//
	setOptionBoxHelpTag( "OffsetCurveOnSurface" );

	//	Set the current values of the option box.
	//
	eval ($setup + " " + $parent + " 0 \"" + $goToTool + "\"");	
	
	//	Show the option box.
	//
	showOptionBox();
}

//
//  Procedure Name:
//      offsetCosHelp
//
//  Description:
//		Returns a short description about the offsetCos command.
//
//  Input Arguments:
//      None.
//
//  Return Value:
//      string.
//
proc string offsetCosHelp()
{
	return 
	"  Command: offsetCos - create a offset 2d curve from a 2d curve.\n" +
	"Select at least one curve on surface to offset.";	
}

//
//  Procedure Name:
//      assembleCmd
//
//  Description:
//		Construct the offsetCos command that will apply the option box 
//		values.
//
//  Input Arguments:
//      None.
//
//  Return Value:
//      The offsetCos command string.
//
proc string assembleCmd()
{
	setOptionVars(false);

	string $cmd = "offsetCosPreset";
	$cmd = $cmd + "(" ;

	// get the global history flag value
	int $doHistory = `constructionHistory -q -tgl`;
	$cmd = $cmd + $doHistory + ",";
	int $curveRangePartial = `optionVar -q offsetCosRangePartial`;
	$cmd = $cmd + $curveRangePartial + "," ;  
	int $connectBreaks = `optionVar -q offsetCosConnectBreaks`;
	$cmd = $cmd + $connectBreaks + ",";
	int $stitch = `optionVar -q offsetCosStitch`;
	$cmd = $cmd + $stitch + ",";
	int $cutLoop = `optionVar -q offsetCosCutLoop`;
	$cmd = $cmd + $cutLoop + ",";
	float $distance = `optionVar -q offsetCosDistance`;
	$cmd = $cmd + $distance + ",";
	float $tolerance = `optionVar -q offsetCosTolerance`;
	if( `optionVar -q offsetCosUseGlobalTol` ) {
		$tolerance = `optionVar -q positionalTolerance`;
	}

	$cmd = $cmd + $tolerance + ",";
	int $subdivDensity = `optionVar -q offsetCosSubdivDensity`;
	$cmd = $cmd + $subdivDensity;
	$cmd = $cmd + ")";

	return $cmd;
}

//
//  Procedure Name:
//      performoffsetCos
//
//  Description:
//		Perform the offsetCos command using the corresponding 
//		option values.  This procedure will also show the option box
//		window if necessary as well as construct the command string
//		that will invoke the offsetCos command with the current
//		option box values.
//
//  Input Arguments:
//      0 - Execute the command.
//      1 - Show the option box dialog.
//      2 - Return the command to drag to shelf.
//
//  Return Value:
//      The offsetCos command string.
//
global proc string performOffsetCos( int $action, string $goToTool )
{
	int $inTheTool = false;
	if( 3 == $action ) {
		$action = 1;
		$inTheTool = true;
	}

	string $cmd = "";
	switch ($action) {
	  case 0:
		setOptionVars(false);
		$cmd = `assembleCmd`;
		eval($cmd);
		break;

	  case 1:
		offsetCosOptions( $inTheTool, $goToTool );
		break;

	  case 2:
		setOptionVars(false);
		$cmd = `assembleCmd`;
		break;
	}
	return $cmd;
}