// ===========================================================================
// Copyright 2018 Autodesk, Inc. All rights reserved.
//
// Use of this software is subject to the terms of the Autodesk license
// agreement provided at the time of installation or download, or which
// otherwise accompanies this software in either electronic or hard copy form.
// ===========================================================================
//
//
//  Creation Date:  April, 1997
//
//  Description:
//      This script contains code to create and/or set the default
//		values for the option vars for the Fluids menus/option
//		boxes.
//
//  Input Arguments to dynCreateLayout():
//		int $theCmd -- the command for which the layout is being created
//		int $setFactorySettings -- whether to set the default values.
//
//

global proc setFluidOptionVars( int $setFactorySettings )
{
}

global proc setFluidSaveOptionVars( int $setFactorySettings )
{
}

global proc setFluidClearOptionVars( int $setFactorySettings )
{
}

global proc setFluidPBCOptionVars( int $setFactorySettings )
{
}

global proc setFluidTruncatePBCOptionVars( int $setFactorySettings )
{
}

global proc setFluidDeletePBCOptionVars( int $setFactorySettings )
{
}

global proc setFluidToPolyOptionVars( int $setFactorySettings )
{
}

global proc setExtendFluidOptionVars( int $setFactorySettings )
{
	if( $setFactorySettings || !`optionVar -exists "extendFluidRebuildIC"` ) 
	{
		optionVar -intValue "extendFluidRebuildIC" 1; 
	}

	if( $setFactorySettings || !`optionVar -exists "extendFluidMinY"` ) 
	{
		optionVar -intValue "extendFluidMinY" 0; 
	}
	if( $setFactorySettings || !`optionVar -exists "extendFluidMaxY"` ) 
	{
		optionVar -intValue "extendFluidMaxY" 2; 
	}

	if( $setFactorySettings || !`optionVar -exists "extendFluidMinX"` ) 
	{
		optionVar -intValue "extendFluidMinX" 0; 
	}
	if( $setFactorySettings || !`optionVar -exists "extendFluidMaxX"` ) 
	{
		optionVar -intValue "extendFluidMaxX" 0; 
	}
	if( $setFactorySettings || !`optionVar -exists "extendFluidMinZ"` ) 
	{
		optionVar -intValue "extendFluidMinZ" 0; 
	}
	if( $setFactorySettings || !`optionVar -exists "extendFluidMaxZ"` ) 
	{
		optionVar -intValue "extendFluidMaxZ" 0; 
	}

}

global proc setResampleFluidOptionVars( int $setFactorySettings )
{
	if( $setFactorySettings || !`optionVar -exists "resampleFluidRebuildIC"` ) 
	{
		optionVar -intValue "resampleFluidRebuildIC" 1; 
	}

	if( $setFactorySettings || !`optionVar -exists "resampleFluidY"` ) 
	{
		optionVar -intValue "resampleFluidY" 10; 
	}
	if( $setFactorySettings || !`optionVar -exists "resampleFluidX"` ) 
	{
		optionVar -intValue "resampleFluidX" 10; 
	}
	if( $setFactorySettings || !`optionVar -exists "resampleFluidZ"` ) 
	{
		optionVar -intValue "resampleFluidZ" 10; 
	}
}

global proc setCreate3DFluidOptionVars( int $setFactorySettings )
{
	if( $setFactorySettings || !`optionVar -exists "create3DFluidYRes"` ) 
	{
		optionVar -intValue "create3DFluidYRes" 10; 
	}
	if( $setFactorySettings || !`optionVar -exists "create3DFluidXRes"` ) 
	{
		optionVar -intValue "create3DFluidXRes" 10; 
	}
	if( $setFactorySettings || !`optionVar -exists "create3DFluidZRes"` ) 
	{
		optionVar -intValue "create3DFluidZRes" 10; 
	}
	if( $setFactorySettings || !`optionVar -exists "create3DFluidYSize"` ) 
	{
		optionVar -floatValue "create3DFluidYSize" 10; 
	}
	if( $setFactorySettings || !`optionVar -exists "create3DFluidXSize"` ) 
	{
		optionVar -floatValue "create3DFluidXSize" 10; 
	}
	if( $setFactorySettings || !`optionVar -exists "create3DFluidZSize"` ) 
	{
		optionVar -floatValue "create3DFluidZSize" 10; 
	}
}

global proc setCreate2DFluidOptionVars( int $setFactorySettings )
{
	if( $setFactorySettings || !`optionVar -exists "create2DFluidYRes"` ) 
	{
		optionVar -intValue "create2DFluidYRes" 40; 
	}
	if( $setFactorySettings || !`optionVar -exists "create2DFluidXRes"` ) 
	{
		optionVar -intValue "create2DFluidXRes" 40; 
	}
	if( $setFactorySettings || !`optionVar -exists "create2DFluidYSize"` ) 
	{
		optionVar -floatValue "create2DFluidYSize" 10; 
	}
	if( $setFactorySettings || !`optionVar -exists "create2DFluidXSize"` ) 
	{
		optionVar -floatValue "create2DFluidXSize" 10; 
	}
	if( $setFactorySettings || !`optionVar -exists "create2DFluidZSize"` ) 
	{
		optionVar -floatValue "create2DFluidZSize" 0.25; 
	}
}

global proc setMakeCollideFluidOptionVars( int $setFactorySettings )
{
	if( $setFactorySettings || !`optionVar -exists "tessellationFactor"` ) 
	{
		optionVar -intValue "tessellationFactor" 200; 
	}
}

global proc setFluidEmitterOptionVars (int $setFactorySettings)
{
	if( $setFactorySettings || !`optionVar -exists flEmitterName` ) 
	{
		optionVar -stringValue flEmitterName ""; 
	} 

	if( $setFactorySettings || !`optionVar -exists flEmitterParenting` ) 
	{
		optionVar -intValue flEmitterParenting 1; 
	} 

	if( $setFactorySettings || !`optionVar -exists flEmitterTypeOM` ) 
	{
		optionVar -stringValue flEmitterTypeOM (uiRes("m_dynCreateFluidLayout.kOmni")); 
	} 
	if( $setFactorySettings || !`optionVar -exists flEmitterDensityRate` ) 
	{
		optionVar -floatValue flEmitterDensityRate 1.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists flEmitterHeatRate` ) 
	{
		optionVar -floatValue flEmitterHeatRate 1.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists flEmitterFuelRate` ) 
	{
		optionVar -floatValue flEmitterFuelRate 1.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists flEmitterFluidDropoff` ) 
	{
		optionVar -floatValue flEmitterFluidDropoff 2.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists flEmitterCycleOM` ) 
	{
		optionVar -intValue flEmitterCycleOM 1; 
	} 
	if( $setFactorySettings || !`optionVar -exists flEmitterCycleInterval` ) 
	{
		optionVar -intValue flEmitterCycleInterval 1; 
	} 

	if( $setFactorySettings || !`optionVar -exists flEmitterMaxDistance` ) 
	{
		optionVar -floatValue flEmitterMaxDistance 1.0; 
	}
	if( $setFactorySettings || !`optionVar -exists flEmitterMinDistance` ) 
	{
		optionVar -floatValue flEmitterMinDistance 0.0; 
	}  

	if( $setFactorySettings || !`optionVar -exists flEmitterVolumeShapeOM` ) 
	{
		optionVar -intValue flEmitterVolumeShapeOM 1; 
	} 
	if( $setFactorySettings || !`optionVar -exists flEmitterVolumeOffsetX` ) 
	{
		optionVar -floatValue flEmitterVolumeOffsetX 0.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists flEmitterVolumeOffsetY` ) 
	{
		optionVar -floatValue flEmitterVolumeOffsetY 0.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists flEmitterVolumeOffsetZ` ) 
	{
		optionVar -floatValue flEmitterVolumeOffsetZ 0.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists flEmitterVolumeSweep` ) 
	{
		optionVar -floatValue flEmitterVolumeSweep 360.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists flEmitterTorusSectionRadius` ) 
	{
		optionVar -floatValue flEmitterTorusSectionRadius 0.5; 
	}  
}

global proc setFluidEmitFromObjectOptionVars( int $setFactorySettings )
{
	if( $setFactorySettings || !`optionVar -exists flEmitObjectName` ) 
	{
		optionVar -stringValue flEmitObjectName ""; 
	} 

	if( $setFactorySettings || !`optionVar -exists flEmitObjectTypesOM` ) 
	{
		optionVar -stringValue flEmitObjectTypesOM (uiRes("m_dynCreateFluidLayout.kSurface")); 
	} 
	if( $setFactorySettings || !`optionVar -exists flEmitObjectDensityRate` ) 
	{
		optionVar -floatValue flEmitObjectDensityRate 1.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists flEmitObjectHeatRate` ) 
	{
		optionVar -floatValue flEmitObjectHeatRate 1.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists flEmitObjectFuelRate` ) 
	{
		optionVar -floatValue flEmitObjectFuelRate 1.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists flEmitObjectFluidDropoff` ) 
	{
		optionVar -floatValue flEmitObjectFluidDropoff 2.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists flEmitObjectCycleOM` ) 
	{
		optionVar -intValue flEmitObjectCycleOM 1; 
	} 
	if( $setFactorySettings || !`optionVar -exists flEmitObjectCycleInterval` ) 
	{
		optionVar -intValue flEmitObjectCycleInterval 1; 
	} 

	if( $setFactorySettings || !`optionVar -exists flEmitObjectMaxDistance` ) 
	{
		optionVar -floatValue flEmitObjectMaxDistance 1.0; 
	}
	if( $setFactorySettings || !`optionVar -exists flEmitObjectMinDistance` ) 
	{
		optionVar -floatValue flEmitObjectMinDistance 0.0; 
	}  
}

global proc set2DFluidAndEmitterOptionVars( int $setFactorySettings )
{
	if( $setFactorySettings || !`optionVar -exists create2DAddEmitter` ) 
	{
		optionVar -intValue create2DAddEmitter 1; 
	} 
	
	if( $setFactorySettings || !`optionVar -exists fl2DEmitterName` ) 
	{
		optionVar -stringValue fl2DEmitterName ""; 
	} 

	if( $setFactorySettings || !`optionVar -exists fl2DEmitterParenting` ) 
	{
		optionVar -intValue fl2DEmitterParenting 1; 
	} 

	setCreate2DFluidOptionVars( $setFactorySettings );

	if( $setFactorySettings || !`optionVar -exists fl2DEmitterTypesOM` ) 
	{
		optionVar -stringValue fl2DEmitterTypesOM (uiRes("m_dynCreateFluidLayout.kOmni")); 
	} 
	if( $setFactorySettings || !`optionVar -exists fl2DEmitterDensityRate` ) 
	{
		optionVar -floatValue fl2DEmitterDensityRate 1.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists fl2DEmitterHeatRate` ) 
	{
		optionVar -floatValue fl2DEmitterHeatRate 1.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists fl2DEmitterFuelRate` ) 
	{
		optionVar -floatValue fl2DEmitterFuelRate 1.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists fl2DEmitterFluidDropoff` ) 
	{
		optionVar -floatValue fl2DEmitterFluidDropoff 2.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists fl2DEmitterCycleOM` ) 
	{
		optionVar -intValue fl2DEmitterCycleOM 1; 
	} 
	if( $setFactorySettings || !`optionVar -exists fl2DEmitterCycleInterval` ) 
	{
		optionVar -intValue fl2DEmitterCycleInterval 1; 
	} 

	if( $setFactorySettings || !`optionVar -exists fl2DEmitterMaxDistance` ) 
	{
		optionVar -floatValue fl2DEmitterMaxDistance 1.0; 
	}
	if( $setFactorySettings || !`optionVar -exists fl2DEmitterMinDistance` ) 
	{
		optionVar -floatValue fl2DEmitterMinDistance 0.0; 
	}  

	if( $setFactorySettings || !`optionVar -exists fl2DEmitterVolumeShapeOM` ) 
	{
		optionVar -intValue fl2DEmitterVolumeShapeOM 1; 
	} 
	if( $setFactorySettings || !`optionVar -exists fl2DEmitterVolumeOffsetX` ) 
	{
		optionVar -floatValue fl2DEmitterVolumeOffsetX 0.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists fl2DEmitterVolumeOffsetY` ) 
	{
		optionVar -floatValue fl2DEmitterVolumeOffsetY 0.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists fl2DEmitterVolumeOffsetZ` ) 
	{
		optionVar -floatValue fl2DEmitterVolumeOffsetZ 0.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists fl2DEmitterVolumeSweep` ) 
	{
		optionVar -floatValue fl2DEmitterVolumeSweep 360.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists fl2DEmitterTorusSectionRadius` ) 
	{
		optionVar -floatValue fl2DEmitterTorusSectionRadius 0.5; 
	}  
}

global proc set3DFluidAndEmitterOptionVars( int $setFactorySettings )
{
	if( $setFactorySettings || !`optionVar -exists create3DAddEmitter` ) 
	{
		optionVar -intValue create3DAddEmitter 1; 
	} 

	if( $setFactorySettings || !`optionVar -exists fl3DEmitterName` ) 
	{
		optionVar -stringValue fl3DEmitterName ""; 
	} 

	if( $setFactorySettings || !`optionVar -exists fl3DEmitterParenting` ) 
	{
		optionVar -intValue fl3DEmitterParenting 1; 
	} 

	setCreate3DFluidOptionVars( $setFactorySettings );

	if( $setFactorySettings || !`optionVar -exists fl3DEmitterTypesOM` ) 
	{
		optionVar -stringValue fl3DEmitterTypesOM (uiRes("m_dynCreateFluidLayout.kOmni")); 
	} 
	if( $setFactorySettings || !`optionVar -exists fl3DEmitterDensityRate` ) 
	{
		optionVar -floatValue fl3DEmitterDensityRate 1.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists fl3DEmitterHeatRate` ) 
	{
		optionVar -floatValue fl3DEmitterHeatRate 1.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists fl3DEmitterFuelRate` ) 
	{
		optionVar -floatValue fl3DEmitterFuelRate 1.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists fl3DEmitterFluidDropoff` ) 
	{
		optionVar -floatValue fl3DEmitterFluidDropoff 2.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists fl3DEmitterCycleOM` ) 
	{
		optionVar -intValue fl3DEmitterCycleOM 1; 
	} 
	if( $setFactorySettings || !`optionVar -exists fl3DEmitterCycleInterval` ) 
	{
		optionVar -intValue fl3DEmitterCycleInterval 1; 
	} 

	if( $setFactorySettings || !`optionVar -exists fl3DEmitterMaxDistance` ) 
	{
		optionVar -floatValue fl3DEmitterMaxDistance 1.0; 
	}
	if( $setFactorySettings || !`optionVar -exists fl3DEmitterMinDistance` ) 
	{
		optionVar -floatValue fl3DEmitterMinDistance 0.0; 
	}  

	if( $setFactorySettings || !`optionVar -exists fl3DEmitterVolumeShapeOM` ) 
	{
		optionVar -intValue fl3DEmitterVolumeShapeOM 1; 
	} 
	if( $setFactorySettings || !`optionVar -exists fl3DEmitterVolumeOffsetX` ) 
	{
		optionVar -floatValue fl3DEmitterVolumeOffsetX 0.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists fl3DEmitterVolumeOffsetY` ) 
	{
		optionVar -floatValue fl3DEmitterVolumeOffsetY 0.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists fl3DEmitterVolumeOffsetZ` ) 
	{
		optionVar -floatValue fl3DEmitterVolumeOffsetZ 0.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists fl3DEmitterVolumeSweep` ) 
	{
		optionVar -floatValue fl3DEmitterVolumeSweep 360.0; 
	}  
	if( $setFactorySettings || !`optionVar -exists fl3DEmitterTorusSectionRadius` ) 
	{
		optionVar -floatValue fl3DEmitterTorusSectionRadius 0.5; 
	}  
}