// ===========================================================================
// Copyright 2018 Autodesk, Inc. All rights reserved.
//
// Use of this software is subject to the terms of the Autodesk license
// agreement provided at the time of installation or download, or which
// otherwise accompanies this software in either electronic or hard copy form.
// ===========================================================================
displayString -replace -value "Acceleration" m_dynCreateLayout.kAcceleration;
displayString -replace -value "Act in this direction" m_dynCreateLayout.kActAnnot;
displayString -replace -value "Act only in a particular direction" m_dynCreateLayout.kActOnlyAnnot;
displayString -replace -value "Active" m_dynCreateLayout.kActive;
displayString -replace -value "Add selected object(s) to the list" m_dynCreateLayout.kAddSelectedObjectsToTheListAnnot;
displayString -replace -value "Add Selection" m_dynCreateLayout.kAddSelection;
displayString -replace -value "Add to existing spring:" m_dynCreateLayout.kAddToExistingSpring;
displayString -replace -value "Adds to particle motion a component of this length in directionX/Y/Z" m_dynCreateLayout.kAddsParticleMotionAnnot;
displayString -replace -value "Adds to particle motion a component of this length in random direction" m_dynCreateLayout.kAddsToParticleMotionAnnot;
displayString -replace -value "Adds to particle motion a component of this length in directionX/Y/Z" m_dynCreateLayout.kAddsToParticleMotionXYZAnnot;
displayString -replace -value "Affect objects outside the volume instead of inside" m_dynCreateLayout.kAffectObjectsAnnot;
displayString -replace -value "Age" m_dynCreateLayout.kAge;
displayString -replace -value "Age:" m_dynCreateLayout.kAgeLabel;
displayString -replace -value "Age Normalized" m_dynCreateLayout.kAgeNorm;
displayString -replace -value "Aim axis:" m_dynCreateLayout.kAimAxis;
displayString -replace -value "Aim direction:" m_dynCreateLayout.kAimDirection;
displayString -replace -value "Aim position:" m_dynCreateLayout.kAimPosition;
displayString -replace -value "Aim up axis:" m_dynCreateLayout.kAimUpAxis;
displayString -replace -value "Aim world up:" m_dynCreateLayout.kAimWorldUp;
displayString -replace -value "Air field name:" m_dynCreateLayout.kAirFieldName;
displayString -replace -value "If true, and air field is rotating, air flow undergoes that same rotation" m_dynCreateLayout.kAirFieldRotatingAnnot;
displayString -replace -value "Direction of the air flow" m_dynCreateLayout.kAirFlowDirection;
displayString -replace -value "All" m_dynCreateLayout.kAll;
displayString -replace -value "All" m_dynCreateLayout.kAllOption;
displayString -replace -value "Allow all data types:" m_dynCreateLayout.kAllowAllDataTypes;
displayString -replace -value "Along axis:" m_dynCreateLayout.kAlongAxis;
displayString -replace -value "Along axis:" m_dynCreateLayout.kAlongAxisValue;
displayString -replace -value "Amount of field's own velocity to add to the air flow" m_dynCreateLayout.kAmountOfFieldsAnnot;
displayString -replace -value "Angle from the direction setting within which objects are affected" m_dynCreateLayout.kAngleFromTheDirectionSettingAnnot;
displayString -replace -value "If true, apply force only in the air flow direction" m_dynCreateLayout.kApplyForceAnnot;
displayString -replace -value "Around axis:" m_dynCreateLayout.kAroundAxis;
displayString -replace -value "Around axis:" m_dynCreateLayout.kAroundAxisValue;
displayString -replace -value "Attenuation:" m_dynCreateLayout.kAttenuation;
displayString -replace -value "If true and attenuation is greater than 0.0, field effect increases with distance" m_dynCreateLayout.kAttenuationAnnot;
displayString -replace -value "If 0, attenuation will decrease magnitude smoothly to 0 at max distance" m_dynCreateLayout.kAttenuationDecreaseAnnot;
displayString -replace -value "Attenuation:" m_dynCreateLayout.kAttenuationValue;
displayString -replace -value "Away from axis:" m_dynCreateLayout.kAwayFromAxis;
displayString -replace -value "Away from axis:" m_dynCreateLayout.kAwayFromAxisValue;
displayString -replace -value "Away from center:" m_dynCreateLayout.kAwayFromCenter;
displayString -replace -value "Away from center:" m_dynCreateLayout.kAwayFromCenter2;
displayString -replace -value "Axis X:" m_dynCreateLayout.kAxisX;
displayString -replace -value "Axis Y:" m_dynCreateLayout.kAxisY;
displayString -replace -value "Axis Z:" m_dynCreateLayout.kAxisZ;
displayString -replace -value "Barrier" m_dynCreateLayout.kBarrier;
displayString -replace -value "Basic Emission Speed Attributes" m_dynCreateLayout.kBasicEmissionSpeedAttributes;
displayString -replace -value "Basic Emitter Attributes" m_dynCreateLayout.kBasicEmitterAttributes;
displayString -replace -value "Birth time" m_dynCreateLayout.kBirthTime;
displayString -replace -value "Bounciness:" m_dynCreateLayout.kBounciness;
displayString -replace -value "Bounding Box" m_dynCreateLayout.kBoundingBox;
displayString -replace -value "Bounding Boxes" m_dynCreateLayout.kBoundingBoxes;
displayString -replace -value "Once created, this cache will be used until you disable it." m_dynCreateLayout.kCacheCreatedText;
displayString -replace -value "Cache data:" m_dynCreateLayout.kCacheData;
displayString -replace -value "Cache directory:" m_dynCreateLayout.kCacheDirectory;
displayString -replace -value "Center of mass: X:" m_dynCreateLayout.kCenterOfMassX;
displayString -replace -value "Change extent of volume, as in modelling" m_dynCreateLayout.kChangeExtentAnnot;
displayString -replace -value "Change extent of volume, as in modelling" m_dynCreateLayout.kChangeExtentOfVolumeAnnot;
displayString -replace -value "Change size of torus volume, as in modelling" m_dynCreateLayout.kChangeSizeAnnot;
displayString -replace -value "Change size of torus volume, as in modelling" m_dynCreateLayout.kChangeSizeOfTorusAnnot;
displayString -replace -value "Collision layer:" m_dynCreateLayout.kCollisionLayer;
displayString -replace -value "Component only:" m_dynCreateLayout.kComponentOnly;
displayString -replace -value "Cone" m_dynCreateLayout.kCone;
displayString -replace -value "Cone" m_dynCreateLayout.kConeItem;
displayString -replace -value "Constraint name:" m_dynCreateLayout.kConstraintName;
displayString -replace -value "Constraint type:" m_dynCreateLayout.kConstraintType;
displayString -replace -value "Creation method:" m_dynCreateLayout.kCreationMethod;
displayString -replace -value "Creation options:" m_dynCreateLayout.kCreationOptions;
displayString -replace -value "Cube" m_dynCreateLayout.kCube;
displayString -replace -value "Cube" m_dynCreateLayout.kCubeItem;
displayString -replace -value "Cube" m_dynCreateLayout.kCubeOption;
displayString -replace -value "use the current playback range." m_dynCreateLayout.kCurrentPlaybackRange;
displayString -replace -value "Curve" m_dynCreateLayout.kCurve;
displayString -replace -value "Curve Offset" m_dynCreateLayout.kCurveOffset;
displayString -replace -value "Cycle:" m_dynCreateLayout.kCycle;
displayString -replace -value "Cycle emission:" m_dynCreateLayout.kCycleEmission;
displayString -replace -value "Cycle interval:" m_dynCreateLayout.kCycleInterval;
displayString -replace -value "Cycle Options" m_dynCreateLayout.kCycleOptions;
displayString -replace -value "Cycle start object:" m_dynCreateLayout.kCycleStartObject;
displayString -replace -value "Cycle step size:" m_dynCreateLayout.kCycleStepSize;
displayString -replace -value "Cycle step units:" m_dynCreateLayout.kCycleStepUnits;
displayString -replace -value "Cylinder" m_dynCreateLayout.kCylinder;
displayString -replace -value "Cylinder" m_dynCreateLayout.kCylinderItem;
displayString -replace -value "Damping:" m_dynCreateLayout.kDamping;
displayString -replace -value "Damping:" m_dynCreateLayout.kDampingData;
displayString -replace -value "Damping:" m_dynCreateLayout.kDampingValue;
displayString -replace -value "frames of the default render settings node. Otherwise, Maya will" m_dynCreateLayout.kDefaultRenderFrames;
displayString -replace -value "Degrees" m_dynCreateLayout.kDegrees;
displayString -replace -value "Detail turbulence:" m_dynCreateLayout.kDetailTurbulence;
displayString -replace -value "Determines where particles are created (for volume type emitter, only)" m_dynCreateLayout.kDeterminesParticlesAnnot;
displayString -replace -value "Determines weighting of successive noise lookups" m_dynCreateLayout.kDeterminesWeightingAnnot;
displayString -replace -value "Determines (with max distance) where field affects objects; if None, only max distance is used" m_dynCreateLayout.kDeterminesWithMaxDistanceAnnot;
displayString -replace -value "Die on emission volume exit:" m_dynCreateLayout.kDieOnEmissionVolumeExit;
displayString -replace -value "Direction X:" m_dynCreateLayout.kDirectionX;
displayString -replace -value "DirectionX:" m_dynCreateLayout.kDirectionXValue;
displayString -replace -value "Direction Y:" m_dynCreateLayout.kDirectionY;
displayString -replace -value "Direction Z:" m_dynCreateLayout.kDirectionZ;
displayString -replace -value "Directional" m_dynCreateLayout.kDirectional;
displayString -replace -value "Directional speed:" m_dynCreateLayout.kDirectionalSpeed;
displayString -replace -value "Directional speed:" m_dynCreateLayout.kDirectionalSpeedValue;
displayString -replace -value "Directory is subdirectory of current project \"particles\" directory." m_dynCreateLayout.kDirectoryText;
displayString -replace -value "Distance/Direction Attributes" m_dynCreateLayout.kDistanceDirectionAttributes;
displayString -replace -value "Don't duplicate springs:" m_dynCreateLayout.kDontDuplicateSprings;
displayString -replace -value "Drag field name:" m_dynCreateLayout.kDragFieldName;
displayString -replace -value "Duplicate input graph:" m_dynCreateLayout.kDuplicateInputGraph;
displayString -replace -value "Duplicate, make copy soft" m_dynCreateLayout.kDuplicateMakeCopySoft;
displayString -replace -value "Duplicate, make original soft" m_dynCreateLayout.kDuplicateMakeOriginalSoft;
displayString -replace -value "Dynamic friction:" m_dynCreateLayout.kDynamicFriction;
displayString -replace -value "Emit particles in this direction" m_dynCreateLayout.kEmitParticlesAnnot;
displayString -replace -value "Emit particles in this direction" m_dynCreateLayout.kEmitParticlesDirectionAnnot;
displayString -replace -value "Emit particles in a sphere bounded by this distance (does not apply to volumes)" m_dynCreateLayout.kEmitParticlesInSphereAnnot;
displayString -replace -value "Emitter name:" m_dynCreateLayout.kEmitterName;
displayString -replace -value "Emitter type:" m_dynCreateLayout.kEmitterType;
displayString -replace -value "Enable spread:" m_dynCreateLayout.kEnableSpread;
displayString -replace -value "End1 weight:" m_dynCreateLayout.kEnd1Weight;
displayString -replace -value "End2 weight:" m_dynCreateLayout.kEnd2Weight;
displayString -replace -value "Fan" m_dynCreateLayout.kFan;
displayString -replace -value "Field will not act inside this distance; use this to avoid wild motion for objects very near field location" m_dynCreateLayout.kFieldAnnot;
displayString -replace -value "Strength of field force" m_dynCreateLayout.kFieldForceAnnot;
displayString -replace -value "If false, field ignores max distance and extends without limit (subject to volume)" m_dynCreateLayout.kFieldIgnoresMaxAnnot;
displayString -replace -value "Makes field strength diminish with distance" m_dynCreateLayout.kFieldStrengthAnnot;
displayString -replace -value "Force" m_dynCreateLayout.kForce;
displayString -replace -value "Frame (timeRandom on)" m_dynCreateLayout.kFrameTimeRandomOn;
displayString -replace -value "Frames" m_dynCreateLayout.kFrames;
displayString -replace -value "Frequency:" m_dynCreateLayout.kFrequency;
displayString -replace -value "Friction:" m_dynCreateLayout.kFriction;
displayString -replace -value "General Options" m_dynCreateLayout.kGeneralOptions;
displayString -replace -value "Geometry" m_dynCreateLayout.kGeometry;
displayString -replace -value "Goal Offset" m_dynCreateLayout.kGoalOffset;
displayString -replace -value "Goal PP" m_dynCreateLayout.kGoalPP;
displayString -replace -value "Goal weight:" m_dynCreateLayout.kGoalWeight;
displayString -replace -value "Gravity field name:" m_dynCreateLayout.kGravityFieldName;
displayString -replace -value "Greater value causes more frequent irregularities in the motion" m_dynCreateLayout.kGreaterValueAnnot;
displayString -replace -value "Hide non-soft object:" m_dynCreateLayout.kHideNonSoftObject;
displayString -replace -value "Hinge" m_dynCreateLayout.kHinge;
displayString -replace -value "Hit ESC to interrupt the caching operation." m_dynCreateLayout.kHitESCText;
displayString -replace -value "How fast particles come to match the speed of the air current" m_dynCreateLayout.kHowFastParticlesComeAnnot;
displayString -replace -value "Impulse position: X" m_dynCreateLayout.kImpulsePositionX;
displayString -replace -value "Impulse: X:" m_dynCreateLayout.kImpulseX;
displayString -replace -value "Influences disruption along the x axis" m_dynCreateLayout.kInfluencesDisruptionXAnnot;
displayString -replace -value "Influences disruption along the y axis" m_dynCreateLayout.kInfluencesDisruptionYAnnot;
displayString -replace -value "Influences disruption along the z axis" m_dynCreateLayout.kInfluencesDisruptionZAnnot;
displayString -replace -value "Inherit rotation:" m_dynCreateLayout.kInheritRotation;
displayString -replace -value "Inherit velocity:" m_dynCreateLayout.kInheritVelocity;
displayString -replace -value "Initial orientation" m_dynCreateLayout.kInitialOrientation;
displayString -replace -value "Initial orientation: X:" m_dynCreateLayout.kInitialOrientationX;
displayString -replace -value "Initial position" m_dynCreateLayout.kInitialPosition;
displayString -replace -value "Initial position: X:" m_dynCreateLayout.kInitialPositionX;
displayString -replace -value "Initial Settings" m_dynCreateLayout.kInitialSettings;
displayString -replace -value "Initial spin: X:" m_dynCreateLayout.kInitialSpinX;
displayString -replace -value "Initial velocity: X:" m_dynCreateLayout.kInitialVelocityX;
displayString -replace -value "Instanced objects" m_dynCreateLayout.kInstancedObjects;
displayString -replace -value "Interpenetrate:" m_dynCreateLayout.kInterpenetrate;
displayString -replace -value "Invert attenuation:" m_dynCreateLayout.kInvertAttenuation;
displayString -replace -value "Level of detail:" m_dynCreateLayout.kLevelOfDetail;
displayString -replace -value "Lifespan" m_dynCreateLayout.kLifeSpan;
displayString -replace -value "Lifespan PP" m_dynCreateLayout.kLifespanPP;
displayString -replace -value "List of the instanced objects and their indices into the instancer" m_dynCreateLayout.kListOfInstancedObjectsAnnot;
displayString -replace -value "Magnitude:" m_dynCreateLayout.kMagnitude;
displayString -replace -value "Magnitude:" m_dynCreateLayout.kMagnitudeValue;
displayString -replace -value "Make non-soft a goal:" m_dynCreateLayout.kMakeNonSoft;
displayString -replace -value "Make objects fall in this direction" m_dynCreateLayout.kMakeObjectsAnnot;
displayString -replace -value "Make objects move in this direction" m_dynCreateLayout.kMakeObjectsMoveAnnot;
displayString -replace -value "Make objects revolve around this axis" m_dynCreateLayout.kMakeObjectsRevolveAnnot;
displayString -replace -value "Make particles move along volume axis" m_dynCreateLayout.kMakeParticlesMoveAlongAnnot;
displayString -replace -value "Make particles move directly away from volume center point" m_dynCreateLayout.kMakeParticlesMoveAnnot;
displayString -replace -value "Make particles move directly away from volume axis" m_dynCreateLayout.kMakeParticlesMoveAwayAnnot;
displayString -replace -value "Make particles move directly away from volume axis" m_dynCreateLayout.kMakeParticlesMoveDirectlyAnnot;
displayString -replace -value "Make particles move faster; does not apply to volume emitters" m_dynCreateLayout.kMakeParticlesMoveFasterAnnot;
displayString -replace -value "Make particles move directly away from volume center point" m_dynCreateLayout.kMakeParticlesMoveVolumeAnnot;
displayString -replace -value "Make particles rotate around volume axis" m_dynCreateLayout.kMakeParticlesRotateAnnot;
displayString -replace -value "Make particles rotate around volume axis" m_dynCreateLayout.kMakeParticlesRotateAroundAnnot;
displayString -replace -value "Make soft" m_dynCreateLayout.kMakeSoft;
displayString -replace -value "Makes magnitude diminish with distance" m_dynCreateLayout.kMakesMagnitudeAnnot;
displayString -replace -value "Makes particles move directly away from curve or surface" m_dynCreateLayout.kMakesParticlesMoveDirectlyAnnot;
displayString -replace -value "Makes particles move randomly along curve or surface" m_dynCreateLayout.kMakesParticlesMoveRandomlyAnnot;
displayString -replace -value "Mass:" m_dynCreateLayout.kMass;
displayString -replace -value "Mass" m_dynCreateLayout.kMassItem;
displayString -replace -value "Max Distance" m_dynCreateLayout.kMaxDist;
displayString -replace -value "Max distance:" m_dynCreateLayout.kMaxDistance;
displayString -replace -value "Max distance:" m_dynCreateLayout.kMaxDistance2;
displayString -replace -value "Max distance:" m_dynCreateLayout.kMaxDistanceData;
displayString -replace -value "Maximum distance at which field has an effect (subject to volume)" m_dynCreateLayout.kMaximumDistanceFieldAnnot;
displayString -replace -value "If you check this item, Maya will cache for the current start/end" m_dynCreateLayout.kMayaCacheStartEnd;
displayString -replace -value "Maya will play the scene through the range being cached." m_dynCreateLayout.kMayaPlayScene;
displayString -replace -value "Min distance:" m_dynCreateLayout.kMinDistance;
displayString -replace -value "Min distance:" m_dynCreateLayout.kMinDistanceData;
displayString -replace -value "Min distance:" m_dynCreateLayout.kMinDistanceValue;
displayString -replace -value "MinMax" m_dynCreateLayout.kMinMax;
displayString -replace -value "Move Down" m_dynCreateLayout.kMoveDown;
displayString -replace -value "Move highlighted item(s) higher in the list" m_dynCreateLayout.kMoveHighlightedItemsHigherInAnnot;
displayString -replace -value "Move highlighted item(s) lower in the list" m_dynCreateLayout.kMoveHighlightedItemsLowerInAnnot;
displayString -replace -value "Move Up" m_dynCreateLayout.kMoveUp;
displayString -replace -value "Move volume away from actual field location" m_dynCreateLayout.kMoveVolumeAnnot;
displayString -replace -value "Move volume away from actual emitter location" m_dynCreateLayout.kMoveVolumeAwayAnnot;
displayString -replace -value "Nail" m_dynCreateLayout.kNail;
displayString -replace -value "Need parent UV (NURBS):" m_dynCreateLayout.kNeedParentUVNURBS;
displayString -replace -value "Newton field name:" m_dynCreateLayout.kNewtonFieldName;
displayString -replace -value "No particle shapes found" m_dynCreateLayout.kNoParticleShapesFound;
displayString -replace -value "Determines number of noise lookups, and thus the amount of irregularity" m_dynCreateLayout.kNoiseDetermineAnnot;
displayString -replace -value "Noise level:" m_dynCreateLayout.kNoiseLevel;
displayString -replace -value "Noise Ratio:" m_dynCreateLayout.kNoiseRatio;
displayString -replace -value "None" m_dynCreateLayout.kNone;
displayString -replace -value "None" m_dynCreateLayout.kNoneItem;
displayString -replace -value "None" m_dynCreateLayout.kNoneMenuItem;
displayString -replace -value "None (timeRandom off)" m_dynCreateLayout.kNoneTimeRandomOff;
displayString -replace -value "Normal speed:" m_dynCreateLayout.kNormalSpeed;
displayString -replace -value "Number of frames/particles between restarts of random stream" m_dynCreateLayout.kNumberOfFramesAnnot;
displayString -replace -value "Number of particles to create per second" m_dynCreateLayout.kNumberOfParticlesAnnot;
displayString -replace -value "Object index:" m_dynCreateLayout.kObjectIndex;
displayString -replace -value "Offset:" m_dynCreateLayout.kOffset;
displayString -replace -value "Omni" m_dynCreateLayout.kOmni;
displayString -replace -value "Opacity PP" m_dynCreateLayout.kOpacityPP;
displayString -replace -value "Particle collision" m_dynCreateLayout.kParticleCollision;
displayString -replace -value "Particle ID" m_dynCreateLayout.kParticleId;
displayString -replace -value "Particle instancer name:" m_dynCreateLayout.kParticleInstancerName;
displayString -replace -value "Particle object to instance:" m_dynCreateLayout.kParticleObjectToInstance;
displayString -replace -value "Cache:" m_dynCreateLayout.kParticleSystems;
displayString -replace -value "If true, particles die on exiting volume" m_dynCreateLayout.kParticlesDieOnExitingAnnot;
displayString -replace -value "Make particles move along volume axis" m_dynCreateLayout.kParticlesMoveAlongVolumeAnnot;
displayString -replace -value "Performance Attributes" m_dynCreateLayout.kPerformanceAttributes;
displayString -replace -value "Phase X:" m_dynCreateLayout.kPhaseX;
displayString -replace -value "Phase Y:" m_dynCreateLayout.kPhaseY;
displayString -replace -value "Phase Z:" m_dynCreateLayout.kPhaseZ;
displayString -replace -value "Pin" m_dynCreateLayout.kPin;
displayString -replace -value "Position" m_dynCreateLayout.kPosition;
displayString -replace -value "Position:" m_dynCreateLayout.kPositionLabel;
displayString -replace -value "Push particles in this direction" m_dynCreateLayout.kPushParticlesAnnot;
displayString -replace -value "Radial field name:" m_dynCreateLayout.kRadialFieldName;
displayString -replace -value "Radial type:" m_dynCreateLayout.kRadialType;
displayString -replace -value "Radians" m_dynCreateLayout.kRadians;
displayString -replace -value "Radius PP" m_dynCreateLayout.kRadiusPP;
displayString -replace -value "Ramp acceleration" m_dynCreateLayout.kRampAcceleration;
displayString -replace -value "Ramp position" m_dynCreateLayout.kRampPosition;
displayString -replace -value "Ramp Values" m_dynCreateLayout.kRampValues;
displayString -replace -value "Ramp velocity" m_dynCreateLayout.kRampVelocity;
displayString -replace -value "Random direction:" m_dynCreateLayout.kRandomDirectionValue;
displayString -replace -value "Random Motion Speed" m_dynCreateLayout.kRandomMotion;
displayString -replace -value "Random Position" m_dynCreateLayout.kRandomPosition;
displayString -replace -value "Randomize the directions of particles" m_dynCreateLayout.kRandomizeAnnot;
displayString -replace -value "Randomize the speeds of particles up to plus or minus one-half this value" m_dynCreateLayout.kRandomizeSpeedsAnnot;
displayString -replace -value "Rate (particles/sec):" m_dynCreateLayout.kRateParticlesSec;
displayString -replace -value "Record parent (u,v) data; must also add parentU/parentV to particle shape (NURBS surfaces only)" m_dynCreateLayout.kRecordParentUvDataAnnot;
displayString -replace -value "The relative intensity of a second higher frequency turbulence" m_dynCreateLayout.kRelativeIntensityAnnot;
displayString -replace -value "Remove Items" m_dynCreateLayout.kRemoveItems;
displayString -replace -value "Remove the highlighted item(s) from the list" m_dynCreateLayout.kRemoveTheHighlightedItemsAnnot;
displayString -replace -value "Use render settings range:" m_dynCreateLayout.kRenderSettings;
displayString -replace -value "Resilience:" m_dynCreateLayout.kResilience;
displayString -replace -value "Rest length:" m_dynCreateLayout.kRestLength;
displayString -replace -value "Rest length:" m_dynCreateLayout.kRestLengthData;
displayString -replace -value "Restart random stream for this emitter each frame or after some number of particles" m_dynCreateLayout.kRestartRandomAnnot;
displayString -replace -value "RGB PP" m_dynCreateLayout.kRgbPP;
displayString -replace -value "Rigid Body Attributes" m_dynCreateLayout.kRigidBodyAttributes;
displayString -replace -value "Rigid body name:" m_dynCreateLayout.kRigidBodyName;
displayString -replace -value "Rotation:" m_dynCreateLayout.kRotation;
displayString -replace -value "Rotation Options" m_dynCreateLayout.kRotationOptions;
displayString -replace -value "Rotation order:" m_dynCreateLayout.kRotationOrder;
displayString -replace -value "Rotation type:" m_dynCreateLayout.kRotationType;
displayString -replace -value "Rotation units:" m_dynCreateLayout.kRotationUnits;
displayString -replace -value "Scale:" m_dynCreateLayout.kScale;
displayString -replace -value "Scale rate by object size:" m_dynCreateLayout.kScaleRateByObjectSize;
displayString -replace -value "Scale speed by size:" m_dynCreateLayout.kScaleSpeedBySize;
displayString -replace -value "If false, scaling object doesn't change number of particles emitted" m_dynCreateLayout.kScalingObjectAnnot;
displayString -replace -value "If true, scaling volume changes particle speed" m_dynCreateLayout.kScalingVolumeChangesAnnot;
displayString -replace -value "Seconds" m_dynCreateLayout.kSeconds;
displayString -replace -value "Section radius:" m_dynCreateLayout.kSectionRadius;
displayString -replace -value "Section radius:" m_dynCreateLayout.kSectionRadiusValue;
displayString -replace -value "Selected" m_dynCreateLayout.kSelected;
displayString -replace -value "Sequential" m_dynCreateLayout.kSequential;
displayString -replace -value "Set center of mass:" m_dynCreateLayout.kSetCenterOfMass;
displayString -replace -value "Set emitter type to volume to enable" m_dynCreateLayout.kSetEmitterTypeToVolumeTo;
displayString -replace -value "Set exclusive:" m_dynCreateLayout.kSetExclusive;
displayString -replace -value "Set initial orientation:" m_dynCreateLayout.kSetInitialOrientation;
displayString -replace -value "Set initial position:" m_dynCreateLayout.kSetInitialPosition;
displayString -replace -value "Set initial position:" m_dynCreateLayout.kSetInitialPosition2;
displayString -replace -value "Set option values to simulate the wake of a moving object" m_dynCreateLayout.kSetOptionValuesAnnot;
displayString -replace -value "Set spring rest length:" m_dynCreateLayout.kSetSpringRestLength;
displayString -replace -value "Shear:" m_dynCreateLayout.kShear;
displayString -replace -value "Set option values to simulate a fan" m_dynCreateLayout.kSimulateFanAnnot;
displayString -replace -value "Simulate an animated turbulent wind field" m_dynCreateLayout.kSimulateTurbulentAnnot;
displayString -replace -value "Set option values to simulate wind" m_dynCreateLayout.kSimulateWindAnnot;
displayString -replace -value "See solvers | edit oversampling and cache." m_dynCreateLayout.kSolversText;
displayString -replace -value "Speed:" m_dynCreateLayout.kSpeed;
displayString -replace -value "Speed:" m_dynCreateLayout.kSpeedFactor;
displayString -replace -value "Speed random:" m_dynCreateLayout.kSpeedRandom;
displayString -replace -value "Sphere" m_dynCreateLayout.kSphere;
displayString -replace -value "Sphere" m_dynCreateLayout.kSphereItem;
displayString -replace -value "Sphere" m_dynCreateLayout.kSphereOption;
displayString -replace -value "Spin impulse: X:" m_dynCreateLayout.kSpinImpulseX;
displayString -replace -value "Spread:" m_dynCreateLayout.kSpread;
displayString -replace -value "Spread:" m_dynCreateLayout.kSpreadValue;
displayString -replace -value "Spring" m_dynCreateLayout.kSpring;
displayString -replace -value "Spring Attributes" m_dynCreateLayout.kSpringAttributes;
displayString -replace -value "Spring Attributes" m_dynCreateLayout.kSpringAttributesTitle;
displayString -replace -value "Spring Methods" m_dynCreateLayout.kSpringMethods;
displayString -replace -value "Spring name:" m_dynCreateLayout.kSpringName;
displayString -replace -value "Stand in:" m_dynCreateLayout.kStandIn;
displayString -replace -value "Static friction:" m_dynCreateLayout.kStaticFriction;
displayString -replace -value "Stiffness:" m_dynCreateLayout.kStiffness;
displayString -replace -value "Stiffness:" m_dynCreateLayout.kStiffnessValue;
displayString -replace -value "Strength of air current; particles will come to match this speed" m_dynCreateLayout.kStrengthOfAirAnnot;
displayString -replace -value "Surface" m_dynCreateLayout.kSurface;
displayString -replace -value "Tangent speed:" m_dynCreateLayout.kTangentSpeed;
displayString -replace -value "Tessellation factor:" m_dynCreateLayout.kTessellationFactor;
displayString -replace -value "Toggle spread on and off" m_dynCreateLayout.kToggleSpreadAnnot;
displayString -replace -value "Torus" m_dynCreateLayout.kTorus;
displayString -replace -value "Torus" m_dynCreateLayout.kTorusItem;
displayString -replace -value "Translation in X of turbulence function" m_dynCreateLayout.kTranslationAnnot;
displayString -replace -value "Turbulence:" m_dynCreateLayout.kTurbulence;
displayString -replace -value "Rate of change of turbulence over time" m_dynCreateLayout.kTurbulenceChangeRateAnnot;
displayString -replace -value "Turbulence field name:" m_dynCreateLayout.kTurbulenceFieldName;
displayString -replace -value "Turbulence frequency X:" m_dynCreateLayout.kTurbulenceFrequencyX;
displayString -replace -value "Turbulence frequency Y:" m_dynCreateLayout.kTurbulenceFrequencyY;
displayString -replace -value "Turbulence frequency Z:" m_dynCreateLayout.kTurbulenceFrequencyZ;
displayString -replace -value "Turbulence offset X:" m_dynCreateLayout.kTurbulenceOffsetX;
displayString -replace -value "Turbulence offset Y:" m_dynCreateLayout.kTurbulenceOffsetY;
displayString -replace -value "Turbulence offset Z:" m_dynCreateLayout.kTurbulenceOffsetZ;
displayString -replace -value "Repeats in X of turbulence function" m_dynCreateLayout.kTurbulenceRepeatsInXAnnot;
displayString -replace -value "Repeats in Y of turbulence function" m_dynCreateLayout.kTurbulenceRepeatsInYAnnot;
displayString -replace -value "Repeats in Z of turbulence function" m_dynCreateLayout.kTurbulenceRepeatsInZAnnot;
displayString -replace -value "Turbulence speed:" m_dynCreateLayout.kTurbulenceSpeed;
displayString -replace -value "Translation in Y of turbulence function" m_dynCreateLayout.kTurbulenceTranslationInYAnnot;
displayString -replace -value "Translation in Z of turbulence function" m_dynCreateLayout.kTurbulenceTranslationInZAnnot;
displayString -replace -value "Uniform field name:" m_dynCreateLayout.kUniformFieldName;
displayString -replace -value "Only Update particles:" m_dynCreateLayout.kUpdateParticles;
displayString -replace -value "Use direction:" m_dynCreateLayout.kUseDirection;
displayString -replace -value "Use max distance:" m_dynCreateLayout.kUseMaxDistance;
displayString -replace -value "Use per-spring damping:" m_dynCreateLayout.kUsePerSpringDamping;
displayString -replace -value "Use per-spring restlength:" m_dynCreateLayout.kUsePerSpringRestLength;
displayString -replace -value "Use per-spring stiffness:" m_dynCreateLayout.kUsePerSpringStiffness;
displayString -replace -value "Use transform as goal:" m_dynCreateLayout.kUseTransformAsGoal;
displayString -replace -value "Velocity" m_dynCreateLayout.kVelocity;
displayString -replace -value "Visibility:" m_dynCreateLayout.kVisibility;
displayString -replace -value "Volume" m_dynCreateLayout.kVolume;
displayString -replace -value "Volume axis field name:" m_dynCreateLayout.kVolumeAxisFieldName;
displayString -replace -value "Volume Emitter Attributes" m_dynCreateLayout.kVolumeEmitterAttributes;
displayString -replace -value "Volume Exclusion" m_dynCreateLayout.kVolumeExclusion;
displayString -replace -value "Volume offset X:" m_dynCreateLayout.kVolumeOffsetX;
displayString -replace -value "Volume offset X:" m_dynCreateLayout.kVolumeOffsetXValue;
displayString -replace -value "Volume offset Y:" m_dynCreateLayout.kVolumeOffsetY;
displayString -replace -value "Volume offset Y:" m_dynCreateLayout.kVolumeOffsetYValue;
displayString -replace -value "Volume offset Z:" m_dynCreateLayout.kVolumeOffsetZ;
displayString -replace -value "Volume offset Z:" m_dynCreateLayout.kVolumeOffsetZ2;
displayString -replace -value "Volume shape:" m_dynCreateLayout.kVolumeShape;
displayString -replace -value "Volume shape:" m_dynCreateLayout.kVolumeShapeList;
displayString -replace -value "Volume Speed Attributes" m_dynCreateLayout.kVolumeSpeedAttributes;
displayString -replace -value "Volume sweep:" m_dynCreateLayout.kVolumeSweep;
displayString -replace -value "Volume sweep:" m_dynCreateLayout.kVolumeSweepValue;
displayString -replace -value "Volume determines the region where the field affects particles/rigid bodies." m_dynCreateLayout.kVolumeText;
displayString -replace -value "Vortex field name:" m_dynCreateLayout.kVortexFieldName;
displayString -replace -value "Wake" m_dynCreateLayout.kWake;
displayString -replace -value "Weight:" m_dynCreateLayout.kWeight;
displayString -replace -value "Wind" m_dynCreateLayout.kWind;
displayString -replace -value "Wire walk length:" m_dynCreateLayout.kWireWalkLength;
displayString -replace -value "Wireframe" m_dynCreateLayout.kWireframe;
displayString -replace -value "World position" m_dynCreateLayout.kWorldPosition;
displayString -replace -value "World velocity" m_dynCreateLayout.kWorldVelocity;
displayString -replace -value "X :" m_dynCreateLayout.kX;
displayString -replace -value "X direction:" m_dynCreateLayout.kXDirection;
displayString -replace -value "X direction:" m_dynCreateLayout.kXDirectionValue;
displayString -replace -value "Direction X:" m_dynCreateLayout.kXDirectionValue1;
displayString -replace -value "DirectionX:" m_dynCreateLayout.kXDirectionValue2;
displayString -replace -value "XYZ" m_dynCreateLayout.kXYZ;
displayString -replace -value "XZY" m_dynCreateLayout.kXZY;
displayString -replace -value "Y :" m_dynCreateLayout.kY;
displayString -replace -value "Y:" m_dynCreateLayout.kYAxis;
displayString -replace -value "Y direction:" m_dynCreateLayout.kYDirection;
displayString -replace -value "DirectionY:" m_dynCreateLayout.kYDirectionData;
displayString -replace -value "Y direction:" m_dynCreateLayout.kYDirectionValue;
displayString -replace -value "Direction Y:" m_dynCreateLayout.kYDirectionValue1;
displayString -replace -value "DirectionY:" m_dynCreateLayout.kYDirectionValue2;
displayString -replace -value "YXZ" m_dynCreateLayout.kYXZ;
displayString -replace -value "YZX" m_dynCreateLayout.kYZX;
displayString -replace -value "Z :" m_dynCreateLayout.kZ;
displayString -replace -value "Z:" m_dynCreateLayout.kZAxis;
displayString -replace -value "Z direction:" m_dynCreateLayout.kZDirection;
displayString -replace -value "DirectionZ:" m_dynCreateLayout.kZDirectionData;
displayString -replace -value "Z direction:" m_dynCreateLayout.kZDirectionValue;
displayString -replace -value "Direction Z:" m_dynCreateLayout.kZDirectionValue1;
displayString -replace -value "DirectionZ:" m_dynCreateLayout.kZDirectionValue2;
displayString -replace -value "ZXY" m_dynCreateLayout.kZXY;
displayString -replace -value "ZYX" m_dynCreateLayout.kZYX;