// ===========================================================================
// Copyright 2018 Autodesk, Inc. All rights reserved.
//
// Use of this software is subject to the terms of the Autodesk license
// agreement provided at the time of installation or download, or which
// otherwise accompanies this software in either electronic or hard copy form.
// ===========================================================================
//
//  Procedure Name:
//      contextPolyToolsEdgeMM
//
//  Description:
//      This procedure creates the popup/marking menu
//      for poly edge tools. See ModelEdMenu.
//
//  Input Arguments:
//      None
//
//  Return Value:
//      None.


global proc contextPolyToolsEdgeMM()
{
	int $mtkEnable = (`pluginInfo -q -loaded "modelingToolkit"`);

	menuItem
		-label (uiRes("m_contextPolyToolsEdgeMM.kExtrudeEdge"))
		-command "performPolyExtrude 0" 
		-radialPosition "S" 
		-enableCommandRepeat 1
		-image "polyExtrudeEdge.png" 
		;

	menuItem
		-label (uiRes("m_contextPolyToolsEdgeMM.kExtrudeEdgeOptions"))
		-command "performPolyExtrude 1" 
		-optionBox 1
		-radialPosition "S" 
		-enableCommandRepeat 1
		;

	menuItem
		-label (uiRes("m_contextPolyToolsEdgeMM.kDeleteEdge"))
		-command "DeleteEdge" 
		-radialPosition "SW" 
		-enableCommandRepeat 1
		-image "polyDelEdge.png" 
		;

	menuItem
		-label (uiRes("m_contextPolyToolsEdgeMM.kBevelEdge"))
		-command "BevelPolygon" 
		-radialPosition "E" 
		-enableCommandRepeat 1
		-image "polyBevel.png" 
		;

	menuItem
		-label (uiRes("m_contextPolyToolsEdgeMM.kBevelEdgeOptions"))
		-command "BevelPolygonOptions" 
		-optionBox 1
		-radialPosition "E" 
		-enableCommandRepeat 1
		;

	menuItem
	    -version "2018"
		-label (uiRes("m_contextPolyToolsEdgeMM.kSoftenHardenEdge"))
		-subMenu 1
		-tearOff 0
		-radialPosition "SE" 
		-allowOptionBoxes 1
		-postMenuCommandOnce 0
		;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kToggleSoftEdgeDisplay"))
				-command "int $g_cond[1]=`polyOptions -q -ae`; if ($g_cond[0]) polyOptions -se; else polyOptions -ae;" 
				-radialPosition "S" 
				-enableCommandRepeat 1
				-image "commandButton.png" 
				;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kHardenEdge"))
				-command "polyPerformAction \"polySoftEdge -a 0\" e 0" 
				-radialPosition "SE" 
				-enableCommandRepeat 1
				-image "polyHardEdge.png" 
				;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kSoftenHarden"))
				-command "PolygonSoftenHarden" 
				-radialPosition "E" 
				-enableCommandRepeat 1
				-image "polySoftEdge.png" 
				;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kSoftenHardenOptions"))
				-command "PolygonSoftenHardenOptions" 
				-optionBox 1
				-radialPosition "E" 
				-enableCommandRepeat 1
				;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kSoftenEdge"))
				-command "polyPerformAction \"polySoftEdge -a 180\" e 0" 
				-radialPosition "NE" 
				-enableCommandRepeat 1
				-image "polySoftEdge.png" 
				;

				setParent -m ..;

	menuItem
		-label (uiRes("m_contextPolyToolsEdgeMM.kMergeCollapseEdges"))
		-subMenu 1
		-tearOff 0
		-radialPosition "N" 
		-allowOptionBoxes 1
		-postMenuCommandOnce 0
		;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kMergeBorderEdges"))
				-command "performPolyMerge 0" 
				-radialPosition "NE" 
				-enableCommandRepeat 1
				-image "polySewEdge.png" 
				;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kMergeBorderEdgesOptions"))
				-command "performPolyMerge 1" 
				-optionBox 1
				-radialPosition "NE" 
				-enableCommandRepeat 1
				;

			if ($mtkEnable)
			{
				menuItem
					-label (uiRes("m_contextPolyToolsEdgeMM.kPolyBuildMergeVertTool"))
					-annotation (getRunTimeCommandAnnotation("MergeVertexTool"))
					-image "weld_NEX32.png" 
					-radialPosition "S"
					-command "MergeVertexTool" 
					;

				menuItem -optionBox true
					-annotation (getRunTimeCommandAnnotation("MergeVertexToolOptions"))
					-image "weld_NEX32.png" 
					-radialPosition "W" 
					-command "MergeVertexToolOptions"
					;
			}
			else
			{
				menuItem
					-label (uiRes("m_contextPolyToolsEdgeMM.kMergeEdgeTool"))
					-command "MergeEdgeTool" 
					-radialPosition "NW" 
					-enableCommandRepeat 1
					-image "polyMergeEdge.png" 
					;

				menuItem
					-label (uiRes("m_contextPolyToolsEdgeMM.kMergeEdgeToolOptions"))
					-command "MergeEdgeToolOptions" 
					-optionBox 1
					-radialPosition "NW" 
					-enableCommandRepeat 1
					;
			}

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kCollapseEdge"))
				-command "polyCollapseEdge" 
				-radialPosition "E" 
				-enableCommandRepeat 1
				-image "polyCollapseEdge.png" 
				;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kMergeEdgesToCenter"))
				-command "MergeToCenter;" 
				-radialPosition "N" 
				-enableCommandRepeat 1
				-image "commandButton.png" 
				;

			setParent -m ..;


	menuItem
		-label (uiRes("m_contextPolyToolsEdgeMM.kFlipSpinEdges"))
		-subMenu 1
		-tearOff 0
		-radialPosition "NE" 
		;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kFlipTriangleEdge"))
				-command "FlipTriangleEdge" 
				-radialPosition "N" 
				-enableCommandRepeat 1
				-image "polyFlipEdge.png" 
				;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kSpinForward"))
				-command "PolySpinEdgeForward" 
				-radialPosition "E" 
				-enableCommandRepeat 1
				-image "polySpinEdgeForward.png"
				;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kSpinBackward"))
				-command "PolySpinEdgeBackward" 
				-radialPosition "W" 
				-enableCommandRepeat 1
				-image "polySpinEdgeBackward.png"
				;

			setParent -m ..;

	menuItem
		-version "2015"
		-label (uiRes("m_contextPolyToolsEdgeMM.kMultiCutTool"))
		-command "dR_multiCutTool"
		-en $mtkEnable
		-radialPosition "W" 
		-allowOptionBoxes 1
		-image "multiCut_NEX32.png" 
		;

	menuItem
		-label (uiRes("m_contextPolyToolsEdgeMM.kMultiCutToolOptions"))
		-command "dR_multiCutTool; toolPropertyWindow;" 
		-optionBox 1
		-radialPosition "W" 
		-enableCommandRepeat 1
		-enable $mtkEnable
		;

	menuItem
		-label (uiRes("m_contextPolyToolsEdgeMM.kPaintSelectEdges"))
		-command "ArtPaintSelectTool" 
		-radialPosition "NW" 
		-enableCommandRepeat 1
		-image "artSelect.png" 
		;


			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kCreaseTool"))
				-command "PolyCreaseTool" 
				-enableCommandRepeat 1
				-image "polyCrease.png" 
				;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kCreaseToolOptions"))
				-command "PolyCreaseToolOptions" 
				-optionBox 1
				-enableCommandRepeat 1
				-image "polyCrease.png" 
				;

			string $duplicateEdgesLabel, $duplicateEdgesOptions, $duplicateEdgesAnnotation;
			if( !`optionVar -exists polyDuplicateEdgeAsTool` || 
				 `optionVar -q polyDuplicateEdgeAsTool` ) {
				$duplicateEdgesLabel = 		(uiRes("m_contextPolyToolsEdgeMM.kOffsetEdgeLoopTool"));
				$duplicateEdgesOptions = 	(uiRes("m_contextPolyToolsEdgeMM.kOffsetEdgeLoopToolOptions"));
				$duplicateEdgesAnnotation =	(uiRes("m_contextPolyToolsEdgeMM.kOffsetEdgeLoopToolAnnot"));
			} else {
				$duplicateEdgesLabel = 		(uiRes("m_contextPolyToolsEdgeMM.kOffsetEdgeLoop"));
				$duplicateEdgesOptions = 	(uiRes("m_contextPolyToolsEdgeMM.kOffsetEdgeLoopOptions"));
				$duplicateEdgesAnnotation =	(uiRes("m_contextPolyToolsEdgeMM.kOffsetEdgeLoopAnnot"));
			}

			menuItem
				-label $duplicateEdgesLabel
				-annotation $duplicateEdgesAnnotation
				-image "polyDuplicateEdgeLoop.png" 
				-command "DuplicateEdges"
				-dragMenuCommand "performPolyDuplicateEdge 2"
				-dragDoubleClickCommand "DuplicateEdgesOptions"
				;

			menuItem -optionBox true
				-annotation $duplicateEdgesOptions
				-image "polyDuplicateEdgeLoop.png" 
				-command "DuplicateEdgesOptions"
				;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kInsertEdgeLoopTool"))
				-annotation (getRunTimeCommandAnnotation("SplitEdgeRingTool"))
				-image "polySplitEdgeRing.png"
				-command "SplitEdgeRingTool"
				;

			menuItem -optionBox true
				-label (uiRes("m_contextPolyToolsEdgeMM.kInsertEdgeLoopToolOptions"))
				-annotation (getRunTimeCommandAnnotation("SplitEdgeRingToolOptions"))
				-image "polySplitEdgeRing.png" 
				-command "SplitEdgeRingToolOptions" 
				;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kSlideEdgeTool"))
				-image "slideEdgeTool.png" 
				-enableCommandRepeat 1
				-command "SlideEdgeTool" 
				;
			
			menuItem -optionBox true
				-label (uiRes("m_contextPolyToolsEdgeMM.kSlideEdgeToolOptions"))
				-image "slideEdgeTool.png" 
				-enableCommandRepeat 1
				-command "SlideEdgeToolOptions" 
				;

			menuItem
				-version 2018
				-label (uiRes("m_contextPolyToolsEdgeMM.kCircularize"))
				-image "polyCircularize.png" 
				-enableCommandRepeat 1
				-command "PolyCircularize" 
				;
			
			menuItem -optionBox true
				-label (uiRes("m_contextPolyToolsEdgeMM.kCircularizeOptions"))
				-image "slideEdgeTool.png" 
				-enableCommandRepeat 1
				-command "PolyCircularizeOptions" 
				;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kEditEdgeFlow"))
				-enableCommandRepeat 1
				-image "polyEditEdgeFlow.png" 
				-command "PolyEditEdgeFlow" 
				-version "2014"
				;
			
			menuItem -optionBox true
				-label (uiRes("m_contextPolyToolsEdgeMM.kEditEdgeFlowOptions"))
				-enableCommandRepeat 1
				-image "polyEditEdgeFlow.png" 
				-command "PolyEditEdgeFlowOptions" 
				-version "2014"
				;
		
			menuItem
				-divider 1
				;


			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kAddDivisionsToEdge"))
				-image "polySubdFacet.png" 
				-enableCommandRepeat 1
				-command "performPolySubdivide \"\" 0" 
				;

			menuItem -optionBox true
				-label (uiRes("m_contextPolyToolsEdgeMM.kAddDivisionsOptions"))
				-enableCommandRepeat 1
				-command "SubdividePolygonOptions" 
				;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kBridge"))
				-annotation (getRunTimeCommandAnnotation("BridgeEdge"))
				-image "polyBridge.png"
				-command "performBridgeOrFill"
				;

			menuItem -optionBox true
				-label (uiRes("m_contextPolyToolsEdgeMM.kBridgeOptions"))
				-annotation (getRunTimeCommandAnnotation("BridgeEdgeOptions"))
				-command "BridgeEdgeOptions"
				;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kFillHole"))
				-command "FillHole" 
				-enableCommandRepeat 1
				-image "polyCloseBorder.png" 
				;

			menuItem
				-divider 1
				;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kConnectComponents"))
				-annotation (getRunTimeCommandAnnotation("ConnectComponents"))
				-image "polyConnectComponents.png"
				-enableCommandRepeat 1
				-command "ConnectComponents" 
				;

			menuItem -optionBox true
				-label (uiRes("m_contextPolyToolsEdgeMM.kConnectComponentsOptions"))
				-annotation (getRunTimeCommandAnnotation("ConnectComponentsOptions"))
				-image "polyConnectComponents.png"
				-enableCommandRepeat 1
				-command "ConnectComponentsOptions" 
				;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kDetach"))
				-annotation (getRunTimeCommandAnnotation("DetachComponent"))
				-image "polySplitVertex.png"
				-enableCommandRepeat 1
				-command "DetachComponent" 
				;


			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kTransformComponent"))
				-command "MovePolygonComponent;" 
				-enableCommandRepeat 1
				-image "polyMoveVertex.png"
				;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kTransformComponentOptions"))
				-command "MovePolygonComponentOptions" 
				-optionBox 1
				-enableCommandRepeat 1
				;

			menuItem
				-version 2015
				-enable $mtkEnable
				-label (uiRes("m_contextPolyToolsEdgeMM.kMTKConnectTool"))
				-annotation (uiRes("m_contextPolyToolsEdgeMM.kMTKConnectToolAnn"))
				-command "dR_connectTool" 
				-image "connect_NEX32.png"
				MTKConnectToolMM;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kConnectToolOptions"))
				-command "dR_connectTool; toolPropertyWindow;" 
				-optionBox 1
				-enableCommandRepeat 1
				-enable $mtkEnable
				;

			menuItem
				-divider 1
				;

			menuItem
				-label (uiRes("m_contextPolyToolsEdgeMM.kPolygonDisplay"))
				-subMenu 1
				-allowOptionBoxes 1
				-postMenuCommandOnce 0
				;
	
	
				menuItem
					-label (uiRes("m_contextPolyToolsEdgeMM.kToggleBackfaceCulling"))
					-command "int $cond[1]=`polyOptions -q -fb`; if ($cond[0]) polyOptions -bc; else polyOptions -fb;" 
					-enableCommandRepeat 1
					-image "menuIconDisplay.png" 
					;
	
				menuItem
					-divider 1
					;
	
				menuItem
					-label (uiRes("m_contextPolyToolsEdgeMM.kToggleBorderEdges"))
					-command "polyOptions -dmb 0 ;polyOptions  -r -db  on" 
					-enableCommandRepeat 1
					-image "menuIconDisplay.png" 
					;
	
				menuItem
					-label (uiRes("m_contextPolyToolsEdgeMM.kToggleTextureBorderEdges"))
					-command "polyOptions -db 0 ;polyOptions -r -dmb 1" 
					-enableCommandRepeat 1
					-image "menuIconDisplay.png" 
					;
			
				menuItem
					-divider 1
					;
			
				menuItem
					-label (uiRes("m_contextPolyToolsEdgeMM.kToggleHiddenTriangleEdges"))
					-command "polyOptions -r -dt 1" 
					-enableCommandRepeat 1
					-image "menuIconDisplay.png" 
					;
	
				menuItem
					-label (uiRes("m_contextPolyToolsEdgeMM.kToggleSoftEdgeDisplay2"))
					-command "int $g_cond[1]=`polyOptions -q -ae`; if ($g_cond[0]) polyOptions -se; else polyOptions -ae;" 
					-radialPosition "S" 
					-enableCommandRepeat 1
					-image "menuIconDisplay.png" 
					;
	
				menuItem
					-divider 1
					;
	
				menuItem
					-label (uiRes("m_contextPolyToolsEdgeMM.kResetPolygonDisplay"))
					-command "polyOptions -activeObjects -ae  -sb 3  -db 0  -dmb 0  -dv 0  -dn 0 -facet  -dc 0  -dt 0  -dw 0  -din 0 0 0 0  -sn 0.4 -bc  -duv 0  -uvt 0  -cs 0  -cm diffuse  -bcv 1"    
					-enableCommandRepeat 1
					-image "menuIconDisplay.png" 
					;
			
			setParent -menu ..;

		setParent -menu ..;
		

}