// ===========================================================================
// Copyright 2018 Autodesk, Inc. All rights reserved.
//
// Use of this software is subject to the terms of the Autodesk license
// agreement provided at the time of installation or download, or which
// otherwise accompanies this software in either electronic or hard copy form.
// ===========================================================================
displayString -replace -value "Assign to Selected Surfaces" m_FurPluginCreateUI.kASAssignSelSurf;
displayString -replace -value "None" m_FurPluginCreateUI.kASToHFSubMenuNone;
displayString -replace -value "Remove attractor set from fur feedback" m_FurPluginCreateUI.kASToHFSubMenuNoneAnnot;
displayString -replace -value "None" m_FurPluginCreateUI.kAddASSubMenuNone;
displayString -replace -value "Add selected geometry as an attractor to an existing Attractor Set" m_FurPluginCreateUI.kAddSelGeomAttrSet;
displayString -replace -value "Add to Selected Light" m_FurPluginCreateUI.kAddSelLight;
displayString -replace -value "Add fur light attributes to selected light(s)" m_FurPluginCreateUI.kAddSelLightAnnot;
displayString -replace -value "Add shadowing attributes to selected light" m_FurPluginCreateUI.kAddShadowAttribAnnot;
displayString -replace -value "Add shadowing attributes to selected light" m_FurPluginCreateUI.kAddShadowAttributeAnnot;
displayString -replace -value "Read Shadow Maps" m_FurPluginCreateUI.kAdvFurReadShadowMaps;
displayString -replace -value "Advanced Fur Rendering" m_FurPluginCreateUI.kAdvFurRendering;
displayString -replace -value "Shadow Maps Path" m_FurPluginCreateUI.kAdvFurShadowMapsPath;
displayString -replace -value "Fur Files Path:" m_FurPluginCreateUI.kAdvRenderFurFilesPath;
displayString -replace -value "Fur Images Path" m_FurPluginCreateUI.kAdvRenderFurImagesPath;
displayString -replace -value "Shadow Maps" m_FurPluginCreateUI.kAdvRenderShadowMaps;
displayString -replace -value "Shadow Maps and Fur Images" m_FurPluginCreateUI.kAdvRenderShadowMapsFurImages;
displayString -replace -value "Shadow Maps Path" m_FurPluginCreateUI.kAdvRenderShadowMapsPath;
displayString -replace -value "Advanced Options" m_FurPluginCreateUI.kAdvancedOptions;
displayString -replace -value "Always" m_FurPluginCreateUI.kAlways;
displayString -replace -value "Angle" m_FurPluginCreateUI.kAngle;
displayString -replace -value "Assigned Surfaces" m_FurPluginCreateUI.kAssignedSurfaces;
displayString -replace -value "Attach new fur description" m_FurPluginCreateUI.kAttNewFurDescAnnot;
displayString -replace -value "Attach attractor set" m_FurPluginCreateUI.kAttachAttrSet;
displayString -replace -value "Attach Attractor Set to selected surfaces" m_FurPluginCreateUI.kAttachAttrSetToSelSurf;
displayString -replace -value "Attach Feedback" m_FurPluginCreateUI.kAttachFeedback;
displayString -replace -value "Attach Fur Description" m_FurPluginCreateUI.kAttachFurDesc;
displayString -replace -value "Attach a fur description to selected surfaces" m_FurPluginCreateUI.kAttachFurDescAnnot;
displayString -replace -value "None" m_FurPluginCreateUI.kAttachFurDescNone;
displayString -replace -value "None" m_FurPluginCreateUI.kAttachHFSubMenuNone;
displayString -replace -value "Remove fur feedback from selected surfaces" m_FurPluginCreateUI.kAttachHFSubMenuNoneAnnot;
displayString -replace -value "Attach Hair System to Fur" m_FurPluginCreateUI.kAttachHairSystem;
displayString -replace -value "Attach a fur description to selected hair system" m_FurPluginCreateUI.kAttachHairSystemAnnot;
displayString -replace -value "None" m_FurPluginCreateUI.kAttachHairSystemNone;
displayString -replace -value "Attach new fur description" m_FurPluginCreateUI.kAttachNewFurDescAnnot;
displayString -replace -value "^1s Map" m_FurPluginCreateUI.kAttrMap;
displayString -replace -value "^1s Map" m_FurPluginCreateUI.kAttrMapCustomReplace;
displayString -replace -value "^1s Map" m_FurPluginCreateUI.kAttrMapPowerReplace;
displayString -replace -value "Attraction" m_FurPluginCreateUI.kAttraction;
displayString -replace -value "Attractor length:" m_FurPluginCreateUI.kAttractorLen;
displayString -replace -value "Attractor Model" m_FurPluginCreateUI.kAttractorModel;
displayString -replace -value "Attractor Set" m_FurPluginCreateUI.kAttractorSet;
displayString -replace -value "No attractor set is attached to the selected surfaces.\nPlease create and attach Attractor Set before painting.\n" m_FurPluginCreateUI.kAttractorSetMessage;
displayString -replace -value "Attractor Set" m_FurPluginCreateUI.kAttractorSetTitle;
displayString -replace -value "Type:" m_FurPluginCreateUI.kAttractorType;
displayString -replace -value "Attribute Map Height" m_FurPluginCreateUI.kAttributeMapHeight;
displayString -replace -value "^1s's ^2s attribute map file:\n^3s\nwill be overwritten by Maya Fur.\n\nThis attribute map file was previously saved using a ^4s by ^5s fur feedback grid.\nThe current fur feedback grid is ^6s by ^7s.\nIf this file is overwritten, some information loss may occur.\n\nAre you sure that Maya Fur should overwrite it?" m_FurPluginCreateUI.kAttributeMapMsg;
displayString -replace -value "Attribute Map Width" m_FurPluginCreateUI.kAttributeMapWidth;
displayString -replace -value "Auto Back Shade Spotlights" m_FurPluginCreateUI.kAutoBackShadeSpotlights;
displayString -replace -value "Auto-Shading" m_FurPluginCreateUI.kAutoShading;
displayString -replace -value "Bake" m_FurPluginCreateUI.kBake;
displayString -replace -value "Bake Attribute" m_FurPluginCreateUI.kBakeAttribute;
displayString -replace -value "All" m_FurPluginCreateUI.kBakeAttributeAll;
displayString -replace -value "Baldness" m_FurPluginCreateUI.kBaldness;
displayString -replace -value "Base" m_FurPluginCreateUI.kBase;
displayString -replace -value "Base Ambient Color" m_FurPluginCreateUI.kBaseAmbientColor;
displayString -replace -value "Base Color" m_FurPluginCreateUI.kBaseColor;
displayString -replace -value "Base Curl" m_FurPluginCreateUI.kBaseCurl;
displayString -replace -value "A basename cannot be determined for one or more attribute maps. Please enter a basename." m_FurPluginCreateUI.kBaseNameMessage;
displayString -replace -value "A basename could not be determined for the ^1s maps." m_FurPluginCreateUI.kBaseNameWarn;
displayString -replace -value "Base Opacity" m_FurPluginCreateUI.kBaseOpacity;
displayString -replace -value "Base Width" m_FurPluginCreateUI.kBaseWidth;
displayString -replace -value "Both" m_FurPluginCreateUI.kBoth;
displayString -replace -value "Browse..." m_FurPluginCreateUI.kBrowse;
displayString -replace -value " Browse " m_FurPluginCreateUI.kBrowseButton;
displayString -replace -value "Close" m_FurPluginCreateUI.kBtnClose;
displayString -replace -value "Create" m_FurPluginCreateUI.kBtnCreate;
displayString -replace -value "Equalizer Map" m_FurPluginCreateUI.kCBEqualizerMap;
displayString -replace -value "Calc. Area Values" m_FurPluginCreateUI.kCalcAreaValues;
displayString -replace -value "Cancel" m_FurPluginCreateUI.kCancel;
displayString -replace -value "Close" m_FurPluginCreateUI.kClose;
displayString -replace -value "Clump Shape" m_FurPluginCreateUI.kClumpShape;
displayString -replace -value "Clumping" m_FurPluginCreateUI.kClumping;
displayString -replace -value "Clumping Frequency" m_FurPluginCreateUI.kClumpingFrequency;
displayString -replace -value "Comp. Fur" m_FurPluginCreateUI.kCompFur;
displayString -replace -value "Confirm" m_FurPluginCreateUI.kConfirm;
displayString -replace -value "Do you wish to cancel the current Maya Fur render job?" m_FurPluginCreateUI.kConfirmDlgMessage;
displayString -replace -value "Confirm" m_FurPluginCreateUI.kConfirmDlgTitle;
displayString -replace -value "Connect attractor set to fur feedback of selected surfaces" m_FurPluginCreateUI.kConnAttrSetToFurFeedbackAnnot;
displayString -replace -value "This option requires you to save your scene before continuing." m_FurPluginCreateUI.kContinueMessage;
displayString -replace -value "Copy Attr Maps" m_FurPluginCreateUI.kCopyAttrMaps;
displayString -replace -value "Correlation" m_FurPluginCreateUI.kCorrelation;
displayString -replace -value "Create Attractor Set Options" m_FurPluginCreateUI.kCreateAttrSetOpt;
displayString -replace -value "Create Attractor" m_FurPluginCreateUI.kCreateAttractor;
displayString -replace -value "Create attractor" m_FurPluginCreateUI.kCreateAttractorAnnot;
displayString -replace -value "Create Files" m_FurPluginCreateUI.kCreateFiles;
displayString -replace -value "Create fur attractor" m_FurPluginCreateUI.kCreateFurAttractorAnnot;
displayString -replace -value "Fur" m_FurPluginCreateUI.kCreateFurMenu;
displayString -replace -value "Edit Fur Description" m_FurPluginCreateUI.kCreateUIEditFurDesc;
displayString -replace -value "Edit an existing fur description" m_FurPluginCreateUI.kCreateUIEditFurDescAnnot;
displayString -replace -value "None" m_FurPluginCreateUI.kCreateUIEditFurDescNone;
displayString -replace -value "Create Unattached" m_FurPluginCreateUI.kCreateUnattach;
displayString -replace -value "Create fur description unattached" m_FurPluginCreateUI.kCreateUnattachAnnot;
displayString -replace -value "If \"Equalizer Maps\" are turned on, they must also be created." m_FurPluginCreateUI.kCreatedEqualizerMaps;
displayString -replace -value "To create these files, you must already have created Fur Files." m_FurPluginCreateUI.kCreatedFurFiles;
displayString -replace -value "Maya Fur Renderer: Creating directory ^1s\n" m_FurPluginCreateUI.kCreatingDirectoryMsg;
displayString -replace -value "Select only one subdivision surface face to create pointOnSubd node1." m_FurPluginCreateUI.kCreationNode1Error;
displayString -replace -value "Select only one subdivision surface face to create pointOnSubd node2." m_FurPluginCreateUI.kCreationNode2Error;
displayString -replace -value "Curl" m_FurPluginCreateUI.kCurl;
displayString -replace -value "             Dynamic Curves are not attached to the FurDesciption.     \nPlease create and attach Dynamic Curves to FurDescription before painting.\n" m_FurPluginCreateUI.kCurveAttractorSetMessage;
displayString -replace -value "Curve Attractor Set" m_FurPluginCreateUI.kCurveAttractorSetTitle;
displayString -replace -value "curves are not attached to the selected curve system" m_FurPluginCreateUI.kCurveWarning;
displayString -replace -value "Curves Per Fur" m_FurPluginCreateUI.kCurvesPerFur;
displayString -replace -value "CustomEqualizer" m_FurPluginCreateUI.kCustomEqualizer;
displayString -replace -value "Custom Equalizer Map" m_FurPluginCreateUI.kCustomEqualizerMap;
displayString -replace -value "Custom Equalizer Maps" m_FurPluginCreateUI.kCustomEqualizerMaps;
displayString -replace -value " Custom Equalizer Maps " m_FurPluginCreateUI.kCustomEqualizerMapsButton;
displayString -replace -value "Custom Equalizer" m_FurPluginCreateUI.kCustomEqualizerOption;
displayString -replace -value " Default " m_FurPluginCreateUI.kDefault;
displayString -replace -value "Default Equalizer Maps" m_FurPluginCreateUI.kDefaultEqualizerMaps;
displayString -replace -value " Default Equalizer Maps " m_FurPluginCreateUI.kDefaultEqualizerMapsButton;
displayString -replace -value "Delete Attractor Set" m_FurPluginCreateUI.kDelAttrSet;
displayString -replace -value "None" m_FurPluginCreateUI.kDelCASSubMenuNone;
displayString -replace -value "Delete curve attractor" m_FurPluginCreateUI.kDelCrvAttrAnnot;
displayString -replace -value "Delete Curve Attractor Set" m_FurPluginCreateUI.kDelCrvAttractor;
displayString -replace -value "Delete the curve attractor set" m_FurPluginCreateUI.kDelCrvAttractorAnnot;
displayString -replace -value "None" m_FurPluginCreateUI.kDelCrvAttractorNone;
displayString -replace -value "Frame delay:" m_FurPluginCreateUI.kDelay;
displayString -replace -value "Delete" m_FurPluginCreateUI.kDelete;
displayString -replace -value "Delete all fur" m_FurPluginCreateUI.kDeleteAllFurAnnot;
displayString -replace -value "Delete a fur description" m_FurPluginCreateUI.kDeleteAnnot;
displayString -replace -value "Delete Fur Description" m_FurPluginCreateUI.kDeleteFurDesc;
displayString -replace -value "None" m_FurPluginCreateUI.kDeleteNone;
displayString -replace -value "^1s cannot be deleted since it is from a referenced file" m_FurPluginCreateUI.kDeletionWarning;
displayString -replace -value "Detach" m_FurPluginCreateUI.kDetach;
displayString -replace -value "Detach a fur description from selected surfaces" m_FurPluginCreateUI.kDetachAnnot;
displayString -replace -value "Detach Attractor Set from selected surfaces" m_FurPluginCreateUI.kDetachAttrSet;
displayString -replace -value "Detach Fur Description from selected surfaces" m_FurPluginCreateUI.kDetachFurDesc;
displayString -replace -value "None" m_FurPluginCreateUI.kDetachHSSubMenuNone;
displayString -replace -value "Detach Hair System from Fur" m_FurPluginCreateUI.kDetachHairSystem;
displayString -replace -value "Detach a fur description from a selected hair system" m_FurPluginCreateUI.kDetachHairSystemAnnot;
displayString -replace -value "None" m_FurPluginCreateUI.kDetachHairSystemNone;
displayString -replace -value "None" m_FurPluginCreateUI.kDetachNone;
displayString -replace -value "Details" m_FurPluginCreateUI.kDetails;
displayString -replace -value "Direction" m_FurPluginCreateUI.kDirection;
displayString -replace -value "Disable Maya Rendering (batch only)" m_FurPluginCreateUI.kDisableMayaRender;
displayString -replace -value "Duplicate" m_FurPluginCreateUI.kDuplicate;
displayString -replace -value "Duplicate a fur description" m_FurPluginCreateUI.kDuplicateAnnot;
displayString -replace -value "Duplicate Fur Description" m_FurPluginCreateUI.kDuplicateFurDesc;
displayString -replace -value "None" m_FurPluginCreateUI.kDuplicateNone;
displayString -replace -value "Dynamic chain" m_FurPluginCreateUI.kDynChain;
displayString -replace -value "Edit Attractor Set" m_FurPluginCreateUI.kEditAttrSet;
displayString -replace -value "None" m_FurPluginCreateUI.kEditCASSubMenuNone;
displayString -replace -value "Edit Curve Attractor Set" m_FurPluginCreateUI.kEditCrvAttractor;
displayString -replace -value "Edit an existing curve attractor set" m_FurPluginCreateUI.kEditCrvAttractorAnnot;
displayString -replace -value "None" m_FurPluginCreateUI.kEditCrvAttractorNone;
displayString -replace -value "Edit curve attractor" m_FurPluginCreateUI.kEditCurveAttrAnnot;
displayString -replace -value "Edit fur description" m_FurPluginCreateUI.kEditHDSubMenuFurDesc;
displayString -replace -value "Enable Fur" m_FurPluginCreateUI.kEnableFur;
displayString -replace -value "Enable Fur Image Rendering" m_FurPluginCreateUI.kEnableFurImageRen;
displayString -replace -value "Enable Fur Shading/Shadowing" m_FurPluginCreateUI.kEnableFurShading;
displayString -replace -value "End Length" m_FurPluginCreateUI.kEndLength;
displayString -replace -value "Enter Map Basename" m_FurPluginCreateUI.kEnterMapBasename;
displayString -replace -value "Equalizer Map Fill Background" m_FurPluginCreateUI.kEqualizerMapFillBackground;
displayString -replace -value "Equalizer Map Height" m_FurPluginCreateUI.kEqualizerMapHeight;
displayString -replace -value " The following Equalizer map could not be found. \n^1s\nClick Default to generate a new default map to customize. Click Browse to search for the map." m_FurPluginCreateUI.kEqualizerMapMessage;
displayString -replace -value "Equalizer Map for Old Scene" m_FurPluginCreateUI.kEqualizerMapTitle;
displayString -replace -value "Equalizer Map Width" m_FurPluginCreateUI.kEqualizerMapWidth;
displayString -replace -value "Equalizer Maps" m_FurPluginCreateUI.kEqualizerMaps;
displayString -replace -value "Equalizer Maps" m_FurPluginCreateUI.kEqualizerMaps2;
displayString -replace -value "No valid equalizer map was specified for reading. The default equalizer map will be created to customize." m_FurPluginCreateUI.kEqualizerValidityWarning;
displayString -replace -value "The existing fur feedback on ^1s  can't be removed." m_FurPluginCreateUI.kExistingFurWarn;
displayString -replace -value "Export of ^1s failed for surface ^2s" m_FurPluginCreateUI.kExportFailureWarn;
displayString -replace -value "Frequency" m_FurPluginCreateUI.kFrequency;
displayString -replace -value "Fur Attribute" m_FurPluginCreateUI.kFurAttribute;
displayString -replace -value "Create:" m_FurPluginCreateUI.kFurCreate;
displayString -replace -value "Fur Description (more)" m_FurPluginCreateUI.kFurDesc;
displayString -replace -value "Assign Fur Description Options" m_FurPluginCreateUI.kFurDescOptTitle;
displayString -replace -value "Fur Description" m_FurPluginCreateUI.kFurDescription;
displayString -replace -value "Switch fur feedback for selected surfaces" m_FurPluginCreateUI.kFurFeedbackSelSurfAnnot;
displayString -replace -value "FurFeedback shape is not connected to surface.\n" m_FurPluginCreateUI.kFurFeedbackShapeError;
displayString -replace -value "Fur Files" m_FurPluginCreateUI.kFurFiles;
displayString -replace -value "Fur Files Path" m_FurPluginCreateUI.kFurGlobalFurFilesPath;
displayString -replace -value "Shadow Maps Path" m_FurPluginCreateUI.kFurGlobalShadowMapsPath;
displayString -replace -value "Fur Images Path" m_FurPluginCreateUI.kFurGlobalsFurImagesPath;
displayString -replace -value "Read Shadow Maps" m_FurPluginCreateUI.kFurGlobalsReadShadowMaps;
displayString -replace -value "Hair/Fur Linking..." m_FurPluginCreateUI.kFurHairLink;
displayString -replace -value "Edit linking between hair system and fur description" m_FurPluginCreateUI.kFurHairLinkAnnot;
displayString -replace -value "Fur Image Rendering" m_FurPluginCreateUI.kFurImageRendering;
displayString -replace -value "Fur Images" m_FurPluginCreateUI.kFurImages;
displayString -replace -value "Browse..." m_FurPluginCreateUI.kFurImagesPathBrowse;
displayString -replace -value "Fur" m_FurPluginCreateUI.kFurMenu;
displayString -replace -value "Fur polar offset could not be added to ^1s" m_FurPluginCreateUI.kFurPolarWarn;
displayString -replace -value "Fur Render Options" m_FurPluginCreateUI.kFurRenderOptions;
displayString -replace -value "Fur Render Settings" m_FurPluginCreateUI.kFurRenderSettings;
displayString -replace -value "Bring up the fur render settings window to edit global settings" m_FurPluginCreateUI.kFurRenderSettingsAnnot;
displayString -replace -value "Fur requires non-overlapping UVs in the 0-1 texture space. Please ensure that your UVs are normalized" m_FurPluginCreateUI.kFurRequisitionWarn;
displayString -replace -value "Shadow Maps" m_FurPluginCreateUI.kFurShadingShadowMaps;
displayString -replace -value "Fur Shading/Shadowing" m_FurPluginCreateUI.kFurShadingShadowing;
displayString -replace -value "Fur Shading Type" m_FurPluginCreateUI.kFurShadingType;
displayString -replace -value "Fur shading/shadowing does not work with volume lights" m_FurPluginCreateUI.kFurShadingWarn;
displayString -replace -value "Fur Shadowing Attributes" m_FurPluginCreateUI.kFurShadowAttrib;
displayString -replace -value "Add/Remove fur shadowing attributes" m_FurPluginCreateUI.kFurShadowAttribAnnot;
displayString -replace -value "Fur shadows can be incorrectly placed when a spotlight has Auto Focus turned on.\n// We suggest you turn off Auto Focus, and instead set the Focus value to Cone Angle + (Penumbra * 2)." m_FurPluginCreateUI.kFurShadowsWarn;
displayString -replace -value "Fur/UV..." m_FurPluginCreateUI.kFurUV;
displayString -replace -value "Specify which fur description to use a particular UV set" m_FurPluginCreateUI.kFurUVLinkingAnnot;
displayString -replace -value "Fur/UV" m_FurPluginCreateUI.kFurUVLinkingLbl;
displayString -replace -value "Specify which fur description to use a particular UV set" m_FurPluginCreateUI.kFurUVSetLinkingAnnot;
displayString -replace -value "Map Multiplier" m_FurPluginCreateUI.kGenHairAttrMapMultiplier;
displayString -replace -value "Map Offset" m_FurPluginCreateUI.kGenHairAttrMapOffset;
displayString -replace -value "Noise Amplitude" m_FurPluginCreateUI.kGenHairAttrNoiseAmplitude;
displayString -replace -value "Noise Frequency" m_FurPluginCreateUI.kGenHairAttrNoiseFrequency;
displayString -replace -value "Map Multiplier" m_FurPluginCreateUI.kGenHairCrvPowAttrMapMultiplier;
displayString -replace -value "Map Offset" m_FurPluginCreateUI.kGenHairCrvPowAttrMapOffset;
displayString -replace -value "Noise Amplitude" m_FurPluginCreateUI.kGenHairCrvPowAttrNoiseAmplitude;
displayString -replace -value "Noise Frequency" m_FurPluginCreateUI.kGenHairCrvPowAttrNoiseFrequency;
displayString -replace -value "Global Scale" m_FurPluginCreateUI.kGlobalScale;
displayString -replace -value "A grid of attractors on the selected surface(s)" m_FurPluginCreateUI.kGridAttractor;
displayString -replace -value "Grid Size (U and V):" m_FurPluginCreateUI.kGridSize;
displayString -replace -value " Creating a grid of attractors is not supported on subdivision surfaces.\n Select the required faces and create the attractors on these instead." m_FurPluginCreateUI.kGridWarning;
displayString -replace -value "Assign to Selected Surfaces" m_FurPluginCreateUI.kHDAssignSelSurf;
displayString -replace -value "Attach fur description to selected surfaces" m_FurPluginCreateUI.kHDSubMenuAttachFurDesc;
displayString -replace -value "New" m_FurPluginCreateUI.kHDSubMenuNew;
displayString -replace -value "Create fur description and attach to selected surfaces" m_FurPluginCreateUI.kHDSubMenuNewAnnot;
displayString -replace -value "None" m_FurPluginCreateUI.kHDSubMenuNone;
displayString -replace -value "Attach hairsystem to fur description" m_FurPluginCreateUI.kHSFDSubMenuAttHairSystemAnnot;
displayString -replace -value "None" m_FurPluginCreateUI.kHSFDSubMenuNone;
displayString -replace -value "Detach hairsystem from fur description" m_FurPluginCreateUI.kHSSubMenuDetachHairSystemAnnot;
displayString -replace -value "Add Item" m_FurPluginCreateUI.kHairDescMapCrvPowNewAddItem;
displayString -replace -value "Map Item" m_FurPluginCreateUI.kHairDescMapCrvPowNewMapItem;
displayString -replace -value "Remove Item" m_FurPluginCreateUI.kHairDescMapCrvPowNewRemoveItem;
displayString -replace -value "Surface" m_FurPluginCreateUI.kHairDescMapCrvPowReplaceSurface;
displayString -replace -value "Add Item" m_FurPluginCreateUI.kHairDescMapCustNewAddItem;
displayString -replace -value "Map Item" m_FurPluginCreateUI.kHairDescMapCustNewMapItem;
displayString -replace -value "Remove Item" m_FurPluginCreateUI.kHairDescMapCustNewRemoveItem;
displayString -replace -value "Surface" m_FurPluginCreateUI.kHairDescMapCustReplaceSurface;
displayString -replace -value "Add Item" m_FurPluginCreateUI.kHairDescMapNewAddItem;
displayString -replace -value "Map Item" m_FurPluginCreateUI.kHairDescMapNewMapItem;
displayString -replace -value "Remove Item" m_FurPluginCreateUI.kHairDescMapNewRemoveItem;
displayString -replace -value "Surface" m_FurPluginCreateUI.kHairDescMapReplaceSurface;
displayString -replace -value "None" m_FurPluginCreateUI.kHairPaintOptMenuNone;
displayString -replace -value "None" m_FurPluginCreateUI.kHairPaintOptionMenuNone;
displayString -replace -value "Hairs/Pixel" m_FurPluginCreateUI.kHairsPerPixel;
displayString -replace -value "Hide all fur" m_FurPluginCreateUI.kHideAllFurAnnot;
displayString -replace -value "IK chain" m_FurPluginCreateUI.kIKChain;
displayString -replace -value "Please select only a sequence of images as `Use Image Sequence` is switched on in file texture node" m_FurPluginCreateUI.kImageSelectionWarn;
displayString -replace -value "Import" m_FurPluginCreateUI.kImport;
displayString -replace -value "Inclination" m_FurPluginCreateUI.kInclination;
displayString -replace -value "Influence" m_FurPluginCreateUI.kInfluence;
displayString -replace -value "Intensity Multiplier" m_FurPluginCreateUI.kIntensityMultiplier;
displayString -replace -value "Invoke paint fur attributes tool" m_FurPluginCreateUI.kInvokePaintFurAttribAnnot;
displayString -replace -value "Invoke paint fur attributes tool" m_FurPluginCreateUI.kInvokePaintFurAttributeAnnot;
displayString -replace -value "Keep Temp Files" m_FurPluginCreateUI.kKeepTempFiles;
displayString -replace -value "What kind of files do you want to create?" m_FurPluginCreateUI.kKindOfFile;
displayString -replace -value "Length" m_FurPluginCreateUI.kLength;
displayString -replace -value " Map Height" m_FurPluginCreateUI.kMapHeight;
displayString -replace -value "The ^1s map for ^2s \"^3s\" could not be found! It will be re-generated from the ^4s fur feedback" m_FurPluginCreateUI.kMapNameNotFoundWarn;
displayString -replace -value "^1s's ^2s map for ^3s \"^4s\" could not be found!" m_FurPluginCreateUI.kMapNotFoundWarn;
displayString -replace -value "^1s map couldn't be created for ^2s since the surface was ambiguous" m_FurPluginCreateUI.kMapWarning;
displayString -replace -value " Map Width" m_FurPluginCreateUI.kMapWidth;
displayString -replace -value "Maps" m_FurPluginCreateUI.kMaps;
displayString -replace -value " Maya Fur Renderer: Completed.\n" m_FurPluginCreateUI.kMayaFurRenderer;
displayString -replace -value "Motion Blur" m_FurPluginCreateUI.kMotionBlur;
displayString -replace -value "multiple occurences of ^1s" m_FurPluginCreateUI.kMultipleOccurencesError;
displayString -replace -value "Never" m_FurPluginCreateUI.kNever;
displayString -replace -value "New Attractor Set" m_FurPluginCreateUI.kNewAttrSet;
displayString -replace -value "No" m_FurPluginCreateUI.kNo;
displayString -replace -value "No Equalizer Maps" m_FurPluginCreateUI.kNoEqualizerMaps;
displayString -replace -value "No Shading" m_FurPluginCreateUI.kNoShading;
displayString -replace -value "\"^1s\" has no UVs. Fur can't be attached to it." m_FurPluginCreateUI.kNoUVWarning;
displayString -replace -value "0 Degrees" m_FurPluginCreateUI.kOffFur0Deg;
displayString -replace -value "Reset fur direction offset" m_FurPluginCreateUI.kOffFur0DegAnnot;
displayString -replace -value "180 Degrees" m_FurPluginCreateUI.kOffFur180Deg;
displayString -replace -value "Offset fur direction by 180 degrees for selected surfaces" m_FurPluginCreateUI.kOffFur180DegAnnot;
displayString -replace -value "270 Degrees" m_FurPluginCreateUI.kOffFur270Deg;
displayString -replace -value "Offset fur direction by 270 degrees for selected surfaces" m_FurPluginCreateUI.kOffFur270DegAnnot;
displayString -replace -value "90 Degrees" m_FurPluginCreateUI.kOffFur90Deg;
displayString -replace -value "Offset fur direction by 90 degrees for selected surfaces" m_FurPluginCreateUI.kOffFur90DegAnnot;
displayString -replace -value "Offset Fur Direction by" m_FurPluginCreateUI.kOffFurDir;
displayString -replace -value "Offset fur direction by 0 degrees" m_FurPluginCreateUI.kOffFurDir0DegAnnot;
displayString -replace -value "Offset fur direction by 180 degrees" m_FurPluginCreateUI.kOffFurDir180DegAnnot;
displayString -replace -value "Offset fur direction by 270 degrees" m_FurPluginCreateUI.kOffFurDir270DegAnnot;
displayString -replace -value "Offset fur direction by 90 degrees" m_FurPluginCreateUI.kOffFurDir90DegAnnot;
displayString -replace -value "Offset fur direction for selected surfaces" m_FurPluginCreateUI.kOffFurDirAnnot;
displayString -replace -value "Offset" m_FurPluginCreateUI.kOffset;
displayString -replace -value "Offset fur direction by 0 degrees" m_FurPluginCreateUI.kOffsetFurDir0Annot;
displayString -replace -value "Offset fur direction by 180 degrees" m_FurPluginCreateUI.kOffsetFurDir180Annot;
displayString -replace -value "Offset fur direction by 270 degrees" m_FurPluginCreateUI.kOffsetFurDir270Annot;
displayString -replace -value "Offset fur direction by 90 degrees" m_FurPluginCreateUI.kOffsetFurDir90Annot;
displayString -replace -value "OK" m_FurPluginCreateUI.kOk;
displayString -replace -value "One attractor at the selected surface point(s)/face(s)" m_FurPluginCreateUI.kOneAttractor;
displayString -replace -value "Opacity" m_FurPluginCreateUI.kOpacity;
displayString -replace -value "Open" m_FurPluginCreateUI.kOpen;
displayString -replace -value "Apply" m_FurPluginCreateUI.kOptBoxApply;
displayString -replace -value "One attractor at the origin" m_FurPluginCreateUI.kOrignAttractor;
displayString -replace -value "Others" m_FurPluginCreateUI.kOthers;
displayString -replace -value "outputCurves are not attached to the selected hair system" m_FurPluginCreateUI.kOutputCurvesWarning;
displayString -replace -value "Paint Fur Attributes Tool" m_FurPluginCreateUI.kPaintFurAttrib;
displayString -replace -value "Paint fur attributes on selected surfaces" m_FurPluginCreateUI.kPaintFurAttribAnnot;
displayString -replace -value "Paint fur attributes tool options" m_FurPluginCreateUI.kPaintFurAttribOptBox;
displayString -replace -value "Paint fur attributes tool options" m_FurPluginCreateUI.kPaintFurAttribOptBoxAnnot;
displayString -replace -value "Paint Fur Attributes Tool Settings" m_FurPluginCreateUI.kPaintFurAttribTool;
displayString -replace -value "Place attractors into" m_FurPluginCreateUI.kPlaceAttrInto;
displayString -replace -value "Polar" m_FurPluginCreateUI.kPolar;
displayString -replace -value "Power" m_FurPluginCreateUI.kPower;
displayString -replace -value "Paint fur attributes tool marking menu (Press)" m_FurPluginCreateUI.kPressPaintFurAttribToolAnnot;
displayString -replace -value "Paint fur attributes marking menu (Press)" m_FurPluginCreateUI.kPressPaintFurAttributesMenuAnnot;
displayString -replace -value "Radius" m_FurPluginCreateUI.kRadius;
displayString -replace -value "Read Fur Files" m_FurPluginCreateUI.kReadFurFiles;
displayString -replace -value "Browse..." m_FurPluginCreateUI.kReadFurFilesBrowse;
displayString -replace -value "Read Fur Images" m_FurPluginCreateUI.kReadFurImages;
displayString -replace -value "Receive Shadows" m_FurPluginCreateUI.kReceiveShadows;
displayString -replace -value "^1s is from a referenced file. It can't be deleted" m_FurPluginCreateUI.kRefenceFileDeletionWarn;
displayString -replace -value "Reference Paths" m_FurPluginCreateUI.kReferencePaths;
displayString -replace -value "Paint fur attributes tool marking menu (Release)" m_FurPluginCreateUI.kReleasePaintFurAttribToolAnnot;
displayString -replace -value "Paint fur attributes marking menu (Release)" m_FurPluginCreateUI.kReleasePaintFurAttributesMenuAnnot;
displayString -replace -value "Remove selected attractors from an existing Attractor Set" m_FurPluginCreateUI.kRemoveSelAttrSet;
displayString -replace -value "Remove from Selected Light" m_FurPluginCreateUI.kRemoveSelLight;
displayString -replace -value "Remove fur light attributes from selected light(s)" m_FurPluginCreateUI.kRemoveSelLightAnnot;
displayString -replace -value "Remove shadowing attributes from selected light" m_FurPluginCreateUI.kRemoveShadowAttribAnnot;
displayString -replace -value "Remove shadowing attributes to selected light" m_FurPluginCreateUI.kRemoveShadowAttributeAnnot;
displayString -replace -value "Render Stats" m_FurPluginCreateUI.kRenderStats;
displayString -replace -value "Rendering" m_FurPluginCreateUI.kRendering;
displayString -replace -value "Reverse Fur Normals" m_FurPluginCreateUI.kRevFurNorm;
displayString -replace -value "Reverse fur normals for selected surfaces" m_FurPluginCreateUI.kRevFurNormAnnot;
displayString -replace -value "Reverse fur normals" m_FurPluginCreateUI.kRevFurNormalsAnnot;
displayString -replace -value "Reverse fur normals" m_FurPluginCreateUI.kReverseFurNormalsAnnot;
displayString -replace -value "Roll" m_FurPluginCreateUI.kRoll;
displayString -replace -value "USamples/VSamples of fur feedback nodes are not same. Result may be unpredictable" m_FurPluginCreateUI.kSamplesWarning;
displayString -replace -value "Save Scene" m_FurPluginCreateUI.kSaveSceneButton;
displayString -replace -value "Save Scene Warning" m_FurPluginCreateUI.kSaveSceneWarning;
displayString -replace -value "Your scene is from an older version of Maya, and was set to Read Equalizer Maps; this functionality has been superceded.\n                      If you had customized the maps, or referencing the furry scene, select \"Custom Equalizer Maps\".\n             If you were reading default equalizer maps generated from a particular frame, select \"Default Equalizer Maps\"\n                                                   and set the Use Frame field to the required frame number." m_FurPluginCreateUI.kSceneMessage;
displayString -replace -value "Scraggle" m_FurPluginCreateUI.kScraggle;
displayString -replace -value "Scraggle Correlation" m_FurPluginCreateUI.kScraggleCorrelation;
displayString -replace -value "Scraggle Frequency" m_FurPluginCreateUI.kScraggleFrequency;
displayString -replace -value "Scraggle" m_FurPluginCreateUI.kScraggleMenu;
displayString -replace -value "Segments" m_FurPluginCreateUI.kSegments;
displayString -replace -value "Select attractors in an Attractor Set" m_FurPluginCreateUI.kSelAttrSetAnnot;
displayString -replace -value "Select Attractor Set's attached surfaces" m_FurPluginCreateUI.kSelAttrSetSurfAnnot;
displayString -replace -value "Select Fur Description's attached surfaces" m_FurPluginCreateUI.kSelFurDescAttachSurfAnnot;
displayString -replace -value "Select Surfaces Attached to" m_FurPluginCreateUI.kSelSurfAttach;
displayString -replace -value "Select surfaces to which fur description is attached" m_FurPluginCreateUI.kSelSurfAttachAnnot;
displayString -replace -value "None" m_FurPluginCreateUI.kSelSurfAttachNone;
displayString -replace -value "Select all fur" m_FurPluginCreateUI.kSelectAllFurAnnot;
displayString -replace -value "Select a light object to operate on.\n" m_FurPluginCreateUI.kSelectLightObjectError;
displayString -replace -value "Select a surface which has fur description(s) to operate on." m_FurPluginCreateUI.kSelectSurfaceError;
displayString -replace -value "Select a NURBS or polygon or Subdiv surface to operate on\n" m_FurPluginCreateUI.kSelectionError;
displayString -replace -value "Select HairSystem to operate on" m_FurPluginCreateUI.kSelectionWarning;
displayString -replace -value "Set Start Position To" m_FurPluginCreateUI.kSetStartPos;
displayString -replace -value "Set the start position of hairs along fur directions" m_FurPluginCreateUI.kSetStartPosAnnot;
displayString -replace -value "Set start position" m_FurPluginCreateUI.kSetStartPosMenuAnnot;
displayString -replace -value "None" m_FurPluginCreateUI.kSetStartPosMenuNone;
displayString -replace -value "None" m_FurPluginCreateUI.kSetStartPosNone;
displayString -replace -value "Shadow Map Rendering" m_FurPluginCreateUI.kShadowMapRendering;
displayString -replace -value "Browse..." m_FurPluginCreateUI.kShadowMapsPathBrowse;
displayString -replace -value "^1s cannot be connected to fur feedback node ^2s" m_FurPluginCreateUI.kShapeWarning;
displayString -replace -value "Show all fur" m_FurPluginCreateUI.kShowAllFurAnnot;
displayString -replace -value "Show fur global node" m_FurPluginCreateUI.kShowFurGlobalAnnot;
displayString -replace -value "Show furglobal node" m_FurPluginCreateUI.kShowFurGlobalNodeAnnot;
displayString -replace -value "Simple chain with linked joint rotations" m_FurPluginCreateUI.kSimpleChain;
displayString -replace -value "Specify which hair systems to use a particular fur description" m_FurPluginCreateUI.kSpecifyHairSystemAnnot;
displayString -replace -value "Hair/Fur Linking" m_FurPluginCreateUI.kSpecifyHairSystemLbl;
displayString -replace -value "Specular Color" m_FurPluginCreateUI.kSpecularColor;
displayString -replace -value "Specular Sharpness" m_FurPluginCreateUI.kSpecularSharpness;
displayString -replace -value "Start Length" m_FurPluginCreateUI.kStartLength;
displayString -replace -value "^1s  could not be unassigned from ^2s" m_FurPluginCreateUI.kStringAssignWarn;
displayString -replace -value "Threshold Length" m_FurPluginCreateUI.kThresholdLength;
displayString -replace -value "Tip" m_FurPluginCreateUI.kTip;
displayString -replace -value "Tip Ambient Color" m_FurPluginCreateUI.kTipAmbientColor;
displayString -replace -value "Tip Color" m_FurPluginCreateUI.kTipColor;
displayString -replace -value "Tip Curl" m_FurPluginCreateUI.kTipCurl;
displayString -replace -value "Tip Opacity" m_FurPluginCreateUI.kTipOpacity;
displayString -replace -value "Tip Width" m_FurPluginCreateUI.kTipWidth;
displayString -replace -value "To selection" m_FurPluginCreateUI.kToSelection;
displayString -replace -value "^1s could not be unassigned from ^2s" m_FurPluginCreateUI.kUnAssignementWarn;
displayString -replace -value "Unless Referenced" m_FurPluginCreateUI.kUnlessReferenced;
displayString -replace -value "Update Fur Maps" m_FurPluginCreateUI.kUpdateFurMaps;
displayString -replace -value "Update all fur desription maps" m_FurPluginCreateUI.kUpdateFurMapsAnnot;
displayString -replace -value "Use Frame" m_FurPluginCreateUI.kUseFrame;
displayString -replace -value "Use Fur Shading/Shadowing on Fur" m_FurPluginCreateUI.kUseFurShading;
displayString -replace -value "Visible In Reflections" m_FurPluginCreateUI.kVisibleReflections;
displayString -replace -value "Visible In Refractions" m_FurPluginCreateUI.kVisibleRefractions;
displayString -replace -value "Width" m_FurPluginCreateUI.kWidth;
displayString -replace -value "Yes" m_FurPluginCreateUI.kYes;