[14:47:59] info : BACKEND: Incoming connection. ID salome_plugin is registered. Connection established.Done reading input [14:49:09] info : BACKEND: done geomedata update [14:49:09] info : BACKEND: C:\Users\mr\Cenos\cenos3\210704_SM_IST//geometry//meshFile.msh read entities [14:49:24] WARN : vtkView: 'boundaryId' field is not found in domain 'wp'. Adding empty one. [14:49:24] WARN : vtkView: 'boundaryId' field is not found in domain 'indu'. Adding empty one. [14:49:24] WARN : vtkView: 'boundaryId' field is not found in domain 'air'. Adding empty one. [14:52:08] info : BACKEND: Done reading input [14:52:29] info : BACKEND: done geomedata update [14:52:29] info : BACKEND: read entities [14:52:29] info : BACKEND: Reading mesh data. [14:52:36] info : BACKEND: Reading physics input. [14:52:41] info : BACKEND: Preparing simulation setup. [14:53:30] info : BACKEND: Starting calculation. [14:53:30] info : BACKEND: Calculating. [14:53:31] ERROR: UI: Could not accomplish calculation: ERROR 'C:\Users\mr\Cenos\cenos3\210704_SM_IST/calculation/function.pro', line 319 : Redefinition of piece-wise Function: area [1303] [14:58:15] WARN : vtkView: 'boundaryId' field is not found in domain 'wp'. Adding empty one. [14:58:15] WARN : vtkView: 'boundaryId' field is not found in domain 'indu'. Adding empty one. [14:58:15] WARN : vtkView: 'boundaryId' field is not found in domain 'air'. Adding empty one. [14:59:03] info : BACKEND: Incoming connection. ID salome_plugin is registered. Connection established.Done reading input [15:00:09] info : BACKEND: done geomedata update C:\Users\mr\Cenos\cenos3\210704_SM_IST//geometry//meshFile.msh read entities [15:00:31] WARN : vtkView: 'boundaryId' field is not found in domain 'wp'. Adding empty one. [15:00:31] WARN : vtkView: 'boundaryId' field is not found in domain 'indu'. Adding empty one. [15:00:31] WARN : vtkView: 'boundaryId' field is not found in domain 'air'. Adding empty one. [15:00:43] info : BACKEND: Done reading input [15:01:04] info : BACKEND: done geomedata update [15:01:04] info : BACKEND: read entities [15:01:04] info : BACKEND: Reading mesh data. [15:01:12] info : BACKEND: Reading physics input. [15:01:16] info : BACKEND: Preparing simulation setup. [15:02:07] info : BACKEND: Starting calculation. [15:02:07] info : BACKEND: Calculating. [15:02:22] info : BACKEND: Time step = 1 / Time = 0.01 s / Time step size = 0.01 s [15:02:24] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:05:26] info : BACKEND: ### getdpThermal calculation ### [15:05:41] info : BACKEND: Iteration Nr. 1 : Largest error ratio: 108 [15:05:43] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:08:51] info : BACKEND: ### getdpThermal calculation ### [15:09:07] info : BACKEND: Iteration Nr. 2 : Largest error ratio: 1.3e+05 [15:09:09] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:12:14] info : BACKEND: ### getdpThermal calculation ### [15:12:31] info : BACKEND: Iteration Nr. 3 : Largest error ratio: 7.34e+04 [15:12:33] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:15:37] info : BACKEND: ### getdpThermal calculation ### [15:15:54] info : BACKEND: Iteration Nr. 4 : Largest error ratio: 4.24e+04 [15:15:56] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:19:14] info : BACKEND: ### getdpThermal calculation ### [15:19:30] info : BACKEND: Iteration Nr. 5 : Largest error ratio: 2.49e+04 [15:19:32] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:22:57] info : BACKEND: ### getdpThermal calculation ### [15:23:14] info : BACKEND: Iteration Nr. 6 : Largest error ratio: 1.48e+04 [15:23:16] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:26:25] info : BACKEND: ### getdpThermal calculation ### [15:26:41] info : BACKEND: Iteration Nr. 7 : Largest error ratio: 8.9e+03 [15:26:43] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:29:50] info : BACKEND: ### getdpThermal calculation ### [15:30:06] info : BACKEND: Iteration Nr. 8 : Largest error ratio: 5.42e+03 [15:30:08] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:33:34] info : BACKEND: ### getdpThermal calculation ### [15:33:51] info : BACKEND: Iteration Nr. 9 : Largest error ratio: 3.34e+03 [15:33:53] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:37:22] info : BACKEND: ### getdpThermal calculation ### [15:37:39] info : BACKEND: Iteration Nr. 10 : Largest error ratio: 2.09e+03 [15:37:41] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:41:10] info : BACKEND: ### getdpThermal calculation ### [15:41:28] info : BACKEND: Iteration Nr. 11 : Largest error ratio: 1.33e+03 [15:41:30] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:45:01] info : BACKEND: ### getdpThermal calculation ### [15:45:18] info : BACKEND: Iteration Nr. 12 : Largest error ratio: 847 [15:45:20] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:48:27] info : BACKEND: ### getdpThermal calculation ### [15:48:43] info : BACKEND: Iteration Nr. 13 : Largest error ratio: 539 [15:48:45] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:51:50] info : BACKEND: ### getdpThermal calculation ### [15:52:06] info : BACKEND: Iteration Nr. 14 : Largest error ratio: 339 [15:52:08] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:55:36] info : BACKEND: ### getdpThermal calculation ### [15:55:53] info : BACKEND: Iteration Nr. 15 : Largest error ratio: 211 [15:55:55] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:59:24] info : BACKEND: ### getdpThermal calculation ### [15:59:41] info : BACKEND: Iteration Nr. 16 : Largest error ratio: 129 [15:59:43] info : BACKEND: ### getdpEMGeneral3D calculation ### [16:03:13] info : BACKEND: ### getdpThermal calculation ### [16:03:31] info : BACKEND: Iteration Nr. 17 : Largest error ratio: 78.6 [16:03:33] info : BACKEND: ### getdpEMGeneral3D calculation ### [16:07:04] info : BACKEND: ### getdpThermal calculation ### [16:07:21] info : BACKEND: Iteration Nr. 18 : Largest error ratio: 47.6 [16:07:24] info : BACKEND: ### getdpEMGeneral3D calculation ### [16:10:53] info : BACKEND: ### getdpThermal calculation ### [16:11:10] info : BACKEND: Iteration Nr. 19 : Largest error ratio: 28.7 [16:11:12] info : BACKEND: ### getdpEMGeneral3D calculation ### [16:14:41] info : BACKEND: ### getdpThermal calculation ### [16:14:58] info : BACKEND: Iteration Nr. 20 : Largest error ratio: 17.3 [16:15:01] info : BACKEND: ### getdpEMGeneral3D calculation ### [16:18:25] info : BACKEND: ### getdpThermal calculation ### [16:18:41] info : BACKEND: Iteration Nr. 21 : Largest error ratio: 10.4 [16:18:43] info : BACKEND: ### getdpEMGeneral3D calculation ### [16:21:47] info : BACKEND: ### getdpThermal calculation ### [16:22:03] info : BACKEND: Iteration Nr. 22 : Largest error ratio: 6.27 [16:22:05] info : BACKEND: ### getdpEMGeneral3D calculation ### [16:25:11] info : BACKEND: ### getdpThermal calculation ### [16:25:27] info : BACKEND: Iteration Nr. 23 : Largest error ratio: 3.77 [16:25:29] info : BACKEND: ### getdpEMGeneral3D calculation ### [16:28:34] info : BACKEND: ### getdpThermal calculation ### [16:28:50] info : BACKEND: Iteration Nr. 24 : Largest error ratio: 2.27 [16:28:52] info : BACKEND: ### getdpEMGeneral3D calculation ### [16:32:00] info : BACKEND: ### getdpThermal calculation ### [16:32:17] info : BACKEND: Iteration Nr. 25 : Largest error ratio: 1.36 [16:32:19] info : BACKEND: ### getdpEMGeneral3D calculation ### [16:35:24] info : BACKEND: ### getdpThermal calculation ### [16:35:40] info : BACKEND: Iteration Nr. 26 : Largest error ratio: 0.818 [16:35:40] info : BACKEND: ACCURATE STEP CONVERGED (26 iterations, error ratio 0.818082) [16:36:08] info : BACKEND: Post processing results. [16:37:57] info : BACKEND: Calculating global variables. [16:38:00] info : UI: Calculation time: 5842s [16:38:00] info : STATUS: Starting ParaView [16:38:04] ERROR: >> ParaView process: stderr: ( 3.832s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.832s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [16:38:04] ERROR: >> ParaView process: stderr: ( 3.904s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.904s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.904s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.904s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [16:38:04] ERROR: >> ParaView process: stderr: ( 3.915s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.915s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [16:38:04] ERROR: >> ParaView process: stderr: ( 3.999s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.999s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.999s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.999s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.999s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.999s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [16:38:04] ERROR: >> ParaView process: stderr: ( 4.011s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.011s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.011s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.011s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.011s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [16:38:04] ERROR: >> ParaView process: stderr: ( 4.011s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [16:38:04] ERROR: >> ParaView process: stderr: ( 4.015s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.015s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.015s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.015s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.015s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [16:38:04] ERROR: >> ParaView process: stderr: ( 4.015s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [16:38:04] ERROR: >> ParaView process: stderr: ( 4.023s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.023s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.023s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.023s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [16:38:04] ERROR: >> ParaView process: stderr: ( 4.023s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.023s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [16:38:04] ERROR: >> ParaView process: stderr: ( 4.027s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.027s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.027s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.027s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [16:38:04] ERROR: >> ParaView process: stderr: ( 4.027s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.027s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [19:02:50] WARN : vtkView: 'boundaryId' field is not found in domain 'wp'. Adding empty one. [19:02:50] WARN : vtkView: 'boundaryId' field is not found in domain 'indu'. Adding empty one. [19:02:50] WARN : vtkView: 'boundaryId' field is not found in domain 'air'. Adding empty one. [19:14:24] info : BACKEND: Incoming connection. ID salome_plugin is registered. Connection established.Done reading input [19:14:27] WARN : vtkView: 'boundaryId' field is not found in domain 'wp'. Adding empty one. [19:14:28] WARN : vtkView: 'boundaryId' field is not found in domain 'indu'. Adding empty one. [19:14:28] WARN : vtkView: 'boundaryId' field is not found in domain 'air'. Adding empty one. [19:15:34] info : BACKEND: done geomedata update C:\Users\mr\Cenos\cenos3\210704_SM_IST//geometry//meshFile.msh read entities [19:15:48] WARN : vtkView: 'boundaryId' field is not found in domain 'wp'. Adding empty one. [19:15:48] WARN : vtkView: 'boundaryId' field is not found in domain 'indu'. Adding empty one. [19:15:48] WARN : vtkView: 'boundaryId' field is not found in domain 'air'. Adding empty one. [19:19:37] info : BACKEND: Done reading input [19:19:59] info : BACKEND: done geomedata update [19:19:59] info : BACKEND: read entities [19:19:59] info : BACKEND: Reading mesh data. [19:20:06] info : BACKEND: Reading physics input. [19:20:12] info : BACKEND: Preparing simulation setup. [19:21:01] info : BACKEND: Starting calculation. [19:21:01] info : BACKEND: Calculating. [19:21:17] info : BACKEND: Time step = 1 / Time = 0.01 s / Time step size = 0.01 s [19:21:19] info : BACKEND: ### getdpEMGeneral3D calculation ### [19:24:20] info : BACKEND: ### getdpThermal calculation ### [19:24:37] info : BACKEND: Iteration Nr. 1 : Largest error ratio: 108 [19:24:39] info : BACKEND: ### getdpEMGeneral3D calculation ### [19:27:44] info : BACKEND: ### getdpThermal calculation ### [19:28:00] info : BACKEND: Iteration Nr. 2 : Largest error ratio: 1.3e+05 [19:28:02] info : BACKEND: ### getdpEMGeneral3D calculation ### [19:31:07] info : BACKEND: ### getdpThermal calculation ### [19:31:23] info : BACKEND: Iteration Nr. 3 : Largest error ratio: 7.34e+04 [19:31:25] info : BACKEND: ### getdpEMGeneral3D calculation ### [19:34:30] info : BACKEND: ### getdpThermal calculation ### [19:34:46] info : BACKEND: Iteration Nr. 4 : Largest error ratio: 4.24e+04 [19:34:48] info : BACKEND: ### getdpEMGeneral3D calculation ### [19:35:19] info : UI: Stop simulation [19:35:21] info : BACKEND: Post processing results. [19:35:42] info : STATUS: CENOS kernel has been stopped [19:35:42] ERROR: Error when executing pre-processor: There was a problem in the CENOS kernel [19:35:42] ERROR: UI: Could not accomplish calculation: There was a problem in the CENOS kernel [19:35:42] ERROR: Possibly unhandled rejection: There was a problem in the CENOS kernel [19:35:43] info : STATUS: Restarting CENOS kernel… [19:35:45] info : BACKEND: GetDP CPU info : [ Core: Sandybridge ] [19:35:45] info : BACKEND: Incoming connection. ID backend is registered. Connection established.Incoming connection. ID backend is registered. Connection established. [19:35:45] info : BACKEND: Incoming connection. ID gui is registered. Connection established.Incoming connection. ID gui is registered. Connection established. [19:35:45] info : STATUS: Connected to the kernel [19:40:31] WARN : vtkView: 'boundaryId' field is not found in domain 'wp'. Adding empty one. [19:40:32] WARN : vtkView: 'boundaryId' field is not found in domain 'indu'. Adding empty one. [19:40:32] WARN : vtkView: 'boundaryId' field is not found in domain 'air'. Adding empty one. [19:41:22] WARN : vtkView: 'boundaryId' field is not found in domain 'wp'. Adding empty one. [19:41:22] WARN : vtkView: 'boundaryId' field is not found in domain 'indu'. Adding empty one. [19:41:23] WARN : vtkView: 'boundaryId' field is not found in domain 'air'. Adding empty one. [19:41:26] ERROR: ERROR Cannot read property 'y' of undefined TypeError: Cannot read property 'y' of undefined at Object.publicAPI.handleMouseDolly (file:///C:/Users/mr/AppData/Local/Programs/CENOS%20Induction%20Heating%203/resources/app.asar/renderer/vendor.js:36217:52) at Object.publicAPI.handleMouseMove (file:///C:/Users/mr/AppData/Local/Programs/CENOS%20Induction%20Heating%203/resources/app.asar/renderer/vendor.js:35953:19) at Object. (file:///C:/Users/mr/AppData/Local/Programs/CENOS%20Induction%20Heating%203/resources/app.asar/renderer/vendor.js:35632:51) at Object.invoke [as invokeMouseMove] (file:///C:/Users/mr/AppData/Local/Programs/CENOS%20Induction%20Heating%203/resources/app.asar/renderer/vendor.js:261961:33) at Object.publicAPI. [as mouseMoveEvent] (file:///C:/Users/mr/AppData/Local/Programs/CENOS%20Induction%20Heating%203/resources/app.asar/renderer/vendor.js:221938:38) at HTMLDivElement.publicAPI.handleMouseMove (file:///C:/Users/mr/AppData/Local/Programs/CENOS%20Induction%20Heating%203/resources/app.asar/renderer/vendor.js:221636:17) at ZoneDelegate.invokeTask (file:///C:/Users/mr/AppData/Local/Programs/CENOS%20Induction%20Heating%203/resources/app.asar/renderer/polyfills.js:483:35) at Object.onInvokeTask (file:///C:/Users/mr/AppData/Local/Programs/CENOS%20Induction%20Heating%203/resources/app.asar/renderer/vendor.js:211390:33) at ZoneDelegate.invokeTask (file:///C:/Users/mr/AppData/Local/Programs/CENOS%20Induction%20Heating%203/resources/app.asar/renderer/polyfills.js:482:40) at Zone.runTask (file:///C:/Users/mr/AppData/Local/Programs/CENOS%20Induction%20Heating%203/resources/app.asar/renderer/polyfills.js:251:51) [19:41:50] info : BACKEND: Done reading input [19:42:10] info : BACKEND: done geomedata update [19:42:10] info : BACKEND: read entities [19:42:10] info : BACKEND: Reading mesh data. [19:42:17] info : BACKEND: Reading physics input. [19:42:23] info : BACKEND: Preparing simulation setup. [19:43:12] info : BACKEND: Starting calculation. [19:43:12] info : BACKEND: Calculating. [19:43:28] info : BACKEND: Time step = 1 / Time = 0.01 s / Time step size = 0.01 s [19:43:30] info : BACKEND: ### getdpEMGeneral3D calculation ### [19:46:38] info : BACKEND: ### getdpThermal calculation ### [19:46:54] info : BACKEND: Iteration Nr. 1 : Largest error ratio: 108 [19:46:57] info : BACKEND: ### getdpEMGeneral3D calculation ### [19:48:07] info : UI: Stop simulation [19:48:08] info : BACKEND: Post processing results. [19:48:30] ERROR: UI: Could not accomplish calculation: There was a problem in the CENOS kernel [19:48:30] ERROR: Possibly unhandled rejection: There was a problem in the CENOS kernel [19:48:30] info : STATUS: CENOS kernel has been stopped [19:48:31] info : STATUS: Restarting CENOS kernel… [19:48:32] info : BACKEND: GetDP CPU info : [ Core: Sandybridge ] [19:48:32] info : BACKEND: Incoming connection. ID backend is registered. Connection established.Incoming connection. ID backend is registered. Connection established. [19:48:32] info : BACKEND: Incoming connection. ID gui is registered. Connection established.Incoming connection. ID gui is registered. Connection established. [19:48:32] info : STATUS: Connected to the kernel [19:49:16] WARN : Route has been changed from global event {"DETAILS":["/support"]} [19:51:47] ERROR: UI: Support service - failed to upload Attachment: Http failure response for https://support.cenos-platform.com/induction-heating/api/attachment: 413 Request Entity Too Large [19:52:02] ERROR: UI: Support service - failed to remove Attachment: Http failure response for https://support.cenos-platform.com/induction-heating/api/attachment/null: 400 Bad Request [19:53:19] ERROR: UI: Support service - failed to upload Attachment: Http failure response for https://support.cenos-platform.com/induction-heating/api/attachment: 413 Request Entity Too Large [20:06:58] WARN : Route has been changed from global event {"DETAILS":["/support"]} [20:08:18] WARN : Route has been changed from global event {"DETAILS":["/support"]} [20:11:50] info : BACKEND: Done reading input [20:12:11] info : BACKEND: done geomedata update [20:12:11] info : BACKEND: read entities [20:12:11] info : BACKEND: Reading mesh data. [20:12:17] info : BACKEND: Reading physics input. [20:12:24] info : BACKEND: Preparing simulation setup. [20:13:12] info : BACKEND: Starting calculation. [20:13:12] info : BACKEND: Calculating. [20:13:28] info : BACKEND: Time step = 1 / Time = 0.01 s / Time step size = 0.01 s [20:13:30] info : BACKEND: ### getdpEMGeneral3D calculation ### [20:16:31] info : BACKEND: ### getdpThermal calculation ### [20:16:47] info : BACKEND: Iteration Nr. 1 : Largest error ratio: 108 [20:16:50] info : BACKEND: ### getdpEMGeneral3D calculation ### [20:19:58] info : BACKEND: ### getdpThermal calculation ### [20:20:14] info : BACKEND: Iteration Nr. 2 : Largest error ratio: 1.3e+05 [20:20:16] info : BACKEND: ### getdpEMGeneral3D calculation ### [20:23:23] info : BACKEND: ### getdpThermal calculation ### [20:23:39] info : BACKEND: Iteration Nr. 3 : Largest error ratio: 7.34e+04 [20:23:42] info : BACKEND: ### getdpEMGeneral3D calculation ### [20:26:50] info : BACKEND: ### getdpThermal calculation ### [20:27:06] info : BACKEND: Iteration Nr. 4 : Largest error ratio: 4.24e+04 [20:27:08] info : BACKEND: ### getdpEMGeneral3D calculation ### [20:30:12] info : BACKEND: ### getdpThermal calculation ### [20:30:28] info : BACKEND: Iteration Nr. 5 : Largest error ratio: 2.49e+04 [20:30:30] info : BACKEND: ### getdpEMGeneral3D calculation ### [20:33:35] info : BACKEND: ### getdpThermal calculation ### [20:33:50] info : BACKEND: Iteration Nr. 6 : Largest error ratio: 1.48e+04 [20:33:53] info : BACKEND: ### getdpEMGeneral3D calculation ### [20:36:57] info : BACKEND: ### getdpThermal calculation ### [20:37:13] info : BACKEND: Iteration Nr. 7 : Largest error ratio: 8.89e+03 [20:37:15] info : BACKEND: ### getdpEMGeneral3D calculation ### [20:40:19] info : BACKEND: ### getdpThermal calculation ### [20:40:36] info : BACKEND: Iteration Nr. 8 : Largest error ratio: 5.41e+03 [20:40:38] info : BACKEND: ### getdpEMGeneral3D calculation ### [20:43:43] info : BACKEND: ### getdpThermal calculation ### [20:43:59] info : BACKEND: Iteration Nr. 9 : Largest error ratio: 3.34e+03 [20:44:01] info : BACKEND: ### getdpEMGeneral3D calculation ### [20:47:06] info : BACKEND: ### getdpThermal calculation ### [20:47:22] info : BACKEND: Iteration Nr. 10 : Largest error ratio: 2.09e+03 [20:47:24] info : BACKEND: ### getdpEMGeneral3D calculation ### [20:50:29] info : BACKEND: ### getdpThermal calculation ### [20:50:45] info : BACKEND: Iteration Nr. 11 : Largest error ratio: 1.33e+03 [20:50:47] info : BACKEND: ### getdpEMGeneral3D calculation ### [20:53:51] info : BACKEND: ### getdpThermal calculation ### [20:54:07] info : BACKEND: Iteration Nr. 12 : Largest error ratio: 846 [20:54:09] info : BACKEND: ### getdpEMGeneral3D calculation ### [20:57:12] info : BACKEND: ### getdpThermal calculation ### [20:57:28] info : BACKEND: Iteration Nr. 13 : Largest error ratio: 539 [20:57:30] info : BACKEND: ### getdpEMGeneral3D calculation ### [21:00:35] info : BACKEND: ### getdpThermal calculation ### [21:00:52] info : BACKEND: Iteration Nr. 14 : Largest error ratio: 339 [21:00:54] info : BACKEND: ### getdpEMGeneral3D calculation ### [21:03:58] info : BACKEND: ### getdpThermal calculation ### [21:04:14] info : BACKEND: Iteration Nr. 15 : Largest error ratio: 210 [21:04:16] info : BACKEND: ### getdpEMGeneral3D calculation ### [21:07:20] info : BACKEND: ### getdpThermal calculation ### [21:07:37] info : BACKEND: Iteration Nr. 16 : Largest error ratio: 129 [21:07:40] info : BACKEND: ### getdpEMGeneral3D calculation ### [21:10:43] info : BACKEND: ### getdpThermal calculation ### [21:10:59] info : BACKEND: Iteration Nr. 17 : Largest error ratio: 78.5 [21:11:01] info : BACKEND: ### getdpEMGeneral3D calculation ### [21:14:06] info : BACKEND: ### getdpThermal calculation ### [21:14:22] info : BACKEND: Iteration Nr. 18 : Largest error ratio: 47.6 [21:14:24] info : BACKEND: ### getdpEMGeneral3D calculation ### [21:17:29] info : BACKEND: ### getdpThermal calculation ### [21:17:45] info : BACKEND: Iteration Nr. 19 : Largest error ratio: 28.7 [21:17:47] info : BACKEND: ### getdpEMGeneral3D calculation ### [21:20:52] info : BACKEND: ### getdpThermal calculation ### [21:21:09] info : BACKEND: Iteration Nr. 20 : Largest error ratio: 17.3 [21:21:11] info : BACKEND: ### getdpEMGeneral3D calculation ### [21:24:16] info : BACKEND: ### getdpThermal calculation ### [21:24:33] info : BACKEND: Iteration Nr. 21 : Largest error ratio: 10.4 [21:24:35] info : BACKEND: ### getdpEMGeneral3D calculation ### [21:27:40] info : BACKEND: ### getdpThermal calculation ### [21:27:56] info : BACKEND: Iteration Nr. 22 : Largest error ratio: 6.26 [21:27:58] info : BACKEND: ### getdpEMGeneral3D calculation ### [21:31:04] info : BACKEND: ### getdpThermal calculation ### [21:31:20] info : BACKEND: Iteration Nr. 23 : Largest error ratio: 3.76 [21:31:22] info : BACKEND: ### getdpEMGeneral3D calculation ### [21:34:27] info : BACKEND: ### getdpThermal calculation ### [21:34:43] info : BACKEND: Iteration Nr. 24 : Largest error ratio: 2.26 [21:34:45] info : BACKEND: ### getdpEMGeneral3D calculation ### [21:37:49] info : BACKEND: ### getdpThermal calculation ### [21:38:05] info : BACKEND: Iteration Nr. 25 : Largest error ratio: 1.36 [21:38:08] info : BACKEND: ### getdpEMGeneral3D calculation ### [21:41:13] info : BACKEND: ### getdpThermal calculation ### [21:41:29] info : BACKEND: Iteration Nr. 26 : Largest error ratio: 0.817 [21:41:29] info : BACKEND: ACCURATE STEP CONVERGED (26 iterations, error ratio 0.817106) [21:41:56] info : BACKEND: Post processing results. [21:43:43] info : BACKEND: Calculating global variables. [21:43:45] info : UI: Calculation time: 5521s [21:43:46] info : STATUS: Starting ParaView [21:43:49] ERROR: >> ParaView process: stderr: ( 3.537s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.537s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [21:43:49] ERROR: >> ParaView process: stderr: ( 3.542s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.542s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.542s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.542s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [21:43:49] ERROR: >> ParaView process: stderr: ( 3.553s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.553s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [21:43:49] ERROR: >> ParaView process: stderr: ( 3.628s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.628s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.628s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.628s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.628s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.628s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [21:43:49] ERROR: >> ParaView process: stderr: ( 3.640s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.640s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.640s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.640s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.640s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.640s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [21:43:49] ERROR: >> ParaView process: stderr: ( 3.643s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.643s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.643s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.643s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.643s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.643s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [21:43:49] ERROR: >> ParaView process: stderr: ( 3.652s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.652s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.652s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.652s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.652s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.652s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [21:43:49] ERROR: >> ParaView process: stderr: ( 3.655s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.655s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.655s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.655s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.655s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [21:43:49] ERROR: >> ParaView process: stderr: ( 3.656s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [17:41:18] info : STATUS: Starting ParaView [17:41:22] ERROR: >> ParaView process: stderr: ( 3.709s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.709s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [17:41:22] ERROR: >> ParaView process: stderr: ( 3.716s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.716s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.716s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.716s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [17:41:22] ERROR: >> ParaView process: stderr: ( 3.729s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.729s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [17:41:22] ERROR: >> ParaView process: stderr: ( 3.811s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.811s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.811s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.811s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [17:41:22] ERROR: >> ParaView process: stderr: ( 3.811s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.811s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [17:41:22] ERROR: >> ParaView process: stderr: ( 3.823s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.823s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [17:41:22] ERROR: >> ParaView process: stderr: ( 3.823s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.823s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.823s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.823s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [17:41:22] ERROR: >> ParaView process: stderr: ( 3.827s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.827s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.827s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.827s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.827s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.827s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [17:41:22] ERROR: >> ParaView process: stderr: ( 3.836s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.836s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.836s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.836s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.836s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.836s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [17:41:22] ERROR: >> ParaView process: stderr: ( 3.840s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.840s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.840s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.840s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.840s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.840s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [17:41:58] info : STATUS: ParaView has been closed [17:41:59] info : STATUS: ParaView has been closed [17:42:31] info : UI: Support service - WebSocket disconnected: transport close [17:42:33] ERROR: UI: Support service - WebSocket connection failed: Error: websocket error [20:51:03] ERROR: UI: Support service - WebSocket connection failed: Error: websocket error [20:51:03] ERROR: Could not send events: TypeError: Failed to fetch [20:51:03] ERROR: checkLicense(): Failed: There was a problem while connecting to the license server. Please ensure your internet connection is working. Otherwise, contact us via support@cenos-platform.com [20:51:15] info : UI: Support service - WebSocket connected [20:58:58] info : UI: Support service - WebSocket disconnected: transport close [20:59:00] ERROR: UI: Support service - WebSocket connection failed: Error: websocket error [21:04:31] ERROR: UI: Support service - WebSocket connection failed: Error: websocket error [21:04:34] ERROR: UI: Support service - WebSocket connection failed: Error: websocket error [21:04:48] info : UI: Support service - WebSocket connected [21:04:58] info : UI: Support service - WebSocket disconnected: transport close [21:05:00] ERROR: UI: Support service - WebSocket connection failed: Error: websocket error [21:05:01] ERROR: UI: Support service - WebSocket connection failed: Error: websocket error [00:05:24] ERROR: UI: Support service - WebSocket connection failed: Error: websocket error [00:05:24] ERROR: checkLicense(): Failed: There was a problem while connecting to the license server. Please ensure your internet connection is working. Otherwise, contact us via support@cenos-platform.com [00:05:36] info : UI: Support service - WebSocket connected [00:05:38] info : UI: Support service - WebSocket disconnected: transport close [00:05:39] ERROR: UI: Support service - WebSocket connection failed: Error: websocket error [00:05:42] ERROR: UI: Support service - WebSocket connection failed: Error: websocket error [18:55:30] ERROR: UI: Support service - WebSocket connection failed: Error: websocket error [18:55:31] ERROR: checkLicense(): Failed: There was a problem while connecting to the license server. Please ensure your internet connection is working. Otherwise, contact us via support@cenos-platform.com [18:55:39] ERROR: UI: Support service - WebSocket connection failed: Error: websocket error [18:55:44] info : UI: Support service - WebSocket connected [13:52:19] WARN : vtkView: 'boundaryId' field is not found in domain 'wp'. Adding empty one. [13:52:20] WARN : vtkView: 'boundaryId' field is not found in domain 'indu'. Adding empty one. [13:52:20] WARN : vtkView: 'boundaryId' field is not found in domain 'air'. Adding empty one. [13:52:57] WARN : may not work properly in a scrolled, static-positioned parent container. [13:53:03] WARN : may not work properly in a scrolled, static-positioned parent container. [13:53:05] WARN : may not work properly in a scrolled, static-positioned parent container. [13:53:55] WARN : vtkView: 'boundaryId' field is not found in domain 'wp'. Adding empty one. [13:53:55] WARN : vtkView: 'boundaryId' field is not found in domain 'indu'. Adding empty one. [13:53:56] WARN : vtkView: 'boundaryId' field is not found in domain 'air'. Adding empty one. [13:58:11] WARN : vtkView: 'boundaryId' field is not found in domain 'wp'. Adding empty one. [13:58:11] WARN : vtkView: 'boundaryId' field is not found in domain 'indu'. Adding empty one. [13:58:11] WARN : vtkView: 'boundaryId' field is not found in domain 'air'. Adding empty one. [14:09:06] info : BACKEND: Incoming connection. ID salome_plugin is registered. Connection established.D:\cases\3_0\210704_SM_IST//geometry//meshFile.msh [14:09:06] info : BACKEND: read entities [14:09:30] WARN : vtkView: 'boundaryId' field is not found in domain 'wp'. Adding empty one. [14:09:31] WARN : vtkView: 'boundaryId' field is not found in domain 'indu'. Adding empty one. [14:09:31] WARN : vtkView: 'boundaryId' field is not found in domain 'air'. Adding empty one. [14:10:23] info : BACKEND: read entities [14:10:23] info : BACKEND: Reading mesh data. [14:10:34] info : BACKEND: Reading physics input. [14:10:40] info : BACKEND: Preparing simulation setup. [14:11:26] info : BACKEND: Starting calculation. [14:11:26] info : BACKEND: Calculating. [14:11:45] info : BACKEND: Time step = 1 / Time = 0.01 s / Time step size = 0.01 s [14:11:47] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:13:20] info : BACKEND: ### getdpThermal calculation ### [14:13:34] info : BACKEND: Iteration Nr. 1 : Largest error ratio: 178 [14:13:36] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:15:07] info : BACKEND: ### getdpThermal calculation ### [14:15:21] info : BACKEND: Iteration Nr. 2 : Largest error ratio: 1.02e+05 [14:15:23] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:16:59] info : BACKEND: ### getdpThermal calculation ### [14:17:14] info : BACKEND: Iteration Nr. 3 : Largest error ratio: 4.97e+04 [14:17:16] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:18:48] info : BACKEND: ### getdpThermal calculation ### [14:19:02] info : BACKEND: Iteration Nr. 4 : Largest error ratio: 2.64e+04 [14:19:04] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:20:40] info : BACKEND: ### getdpThermal calculation ### [14:20:54] info : BACKEND: Iteration Nr. 5 : Largest error ratio: 1.47e+04 [14:20:56] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:22:28] info : BACKEND: ### getdpThermal calculation ### [14:22:42] info : BACKEND: Iteration Nr. 6 : Largest error ratio: 8.49e+03 [14:22:45] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:24:21] info : BACKEND: ### getdpThermal calculation ### [14:24:35] info : BACKEND: Iteration Nr. 7 : Largest error ratio: 5.01e+03 [14:24:37] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:26:09] info : BACKEND: ### getdpThermal calculation ### [14:26:23] info : BACKEND: Iteration Nr. 8 : Largest error ratio: 3.02e+03 [14:26:26] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:28:01] info : BACKEND: ### getdpThermal calculation ### [14:28:16] info : BACKEND: Iteration Nr. 9 : Largest error ratio: 1.88e+03 [14:28:19] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:29:51] info : BACKEND: ### getdpThermal calculation ### [14:30:05] info : BACKEND: Iteration Nr. 10 : Largest error ratio: 1.22e+03 [14:30:08] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:31:43] info : BACKEND: ### getdpThermal calculation ### [14:31:57] info : BACKEND: Iteration Nr. 11 : Largest error ratio: 829 [14:31:59] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:33:33] info : BACKEND: ### getdpThermal calculation ### [14:33:47] info : BACKEND: Iteration Nr. 12 : Largest error ratio: 581 [14:33:50] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:35:25] info : BACKEND: ### getdpThermal calculation ### [14:35:40] info : BACKEND: Iteration Nr. 13 : Largest error ratio: 407 [14:35:42] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:37:22] info : BACKEND: ### getdpThermal calculation ### [14:37:37] info : BACKEND: Iteration Nr. 14 : Largest error ratio: 276 [14:37:40] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:39:24] info : BACKEND: ### getdpThermal calculation ### [14:39:38] info : BACKEND: Iteration Nr. 15 : Largest error ratio: 180 [14:39:40] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:41:16] info : BACKEND: ### getdpThermal calculation ### [14:41:31] info : BACKEND: Iteration Nr. 16 : Largest error ratio: 114 [14:41:34] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:43:09] info : BACKEND: ### getdpThermal calculation ### [14:43:23] info : BACKEND: Iteration Nr. 17 : Largest error ratio: 70.3 [14:43:25] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:44:57] info : BACKEND: ### getdpThermal calculation ### [14:45:11] info : BACKEND: Iteration Nr. 18 : Largest error ratio: 43 [14:45:14] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:46:46] info : BACKEND: ### getdpThermal calculation ### [14:47:00] info : BACKEND: Iteration Nr. 19 : Largest error ratio: 26.1 [14:47:02] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:48:34] info : BACKEND: ### getdpThermal calculation ### [14:48:48] info : BACKEND: Iteration Nr. 20 : Largest error ratio: 15.8 [14:48:50] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:50:22] info : BACKEND: ### getdpThermal calculation ### [14:50:36] info : BACKEND: Iteration Nr. 21 : Largest error ratio: 9.5 [14:50:38] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:52:10] info : BACKEND: ### getdpThermal calculation ### [14:52:24] info : BACKEND: Iteration Nr. 22 : Largest error ratio: 5.72 [14:52:26] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:53:58] info : BACKEND: ### getdpThermal calculation ### [14:54:12] info : BACKEND: Iteration Nr. 23 : Largest error ratio: 3.44 [14:54:14] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:55:48] info : BACKEND: ### getdpThermal calculation ### [14:56:02] info : BACKEND: Iteration Nr. 24 : Largest error ratio: 2.07 [14:56:04] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:57:36] info : BACKEND: ### getdpThermal calculation ### [14:57:50] info : BACKEND: Iteration Nr. 25 : Largest error ratio: 1.25 [14:57:52] info : BACKEND: ### getdpEMGeneral3D calculation ### [14:59:25] info : BACKEND: ### getdpThermal calculation ### [14:59:39] info : BACKEND: Iteration Nr. 26 : Largest error ratio: 0.749 [14:59:39] info : BACKEND: ACCURATE STEP CONVERGED (26 iterations, error ratio 0.748947) [15:00:03] info : BACKEND: Time step = 2 / Time = 0.02 s / Time step size = 0.01 s [15:00:05] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:01:37] info : BACKEND: ### getdpThermal calculation ### [15:01:51] info : BACKEND: Iteration Nr. 1 : Largest error ratio: 793 [15:01:53] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:03:23] info : BACKEND: ### getdpThermal calculation ### [15:03:37] info : BACKEND: Iteration Nr. 2 : Largest error ratio: 476 [15:03:39] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:05:11] info : BACKEND: ### getdpThermal calculation ### [15:05:25] info : BACKEND: Iteration Nr. 3 : Largest error ratio: 285 [15:05:27] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:06:57] info : BACKEND: ### getdpThermal calculation ### [15:07:11] info : BACKEND: Iteration Nr. 4 : Largest error ratio: 171 [15:07:13] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:08:43] info : BACKEND: ### getdpThermal calculation ### [15:08:57] info : BACKEND: Iteration Nr. 5 : Largest error ratio: 103 [15:09:00] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:10:32] info : BACKEND: ### getdpThermal calculation ### [15:10:46] info : BACKEND: Iteration Nr. 6 : Largest error ratio: 61.7 [15:10:48] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:12:18] info : BACKEND: ### getdpThermal calculation ### [15:12:32] info : BACKEND: Iteration Nr. 7 : Largest error ratio: 37 [15:12:34] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:14:07] info : BACKEND: ### getdpThermal calculation ### [15:14:21] info : BACKEND: Iteration Nr. 8 : Largest error ratio: 22.2 [15:14:23] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:15:54] info : BACKEND: ### getdpThermal calculation ### [15:16:08] info : BACKEND: Iteration Nr. 9 : Largest error ratio: 13.3 [15:16:10] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:17:43] info : BACKEND: ### getdpThermal calculation ### [15:17:57] info : BACKEND: Iteration Nr. 10 : Largest error ratio: 7.99 [15:17:59] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:19:30] info : BACKEND: ### getdpThermal calculation ### [15:19:44] info : BACKEND: Iteration Nr. 11 : Largest error ratio: 4.79 [15:19:46] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:21:19] info : BACKEND: ### getdpThermal calculation ### [15:21:33] info : BACKEND: Iteration Nr. 12 : Largest error ratio: 2.88 [15:21:35] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:23:04] info : BACKEND: ### getdpThermal calculation ### [15:23:18] info : BACKEND: Iteration Nr. 13 : Largest error ratio: 1.73 [15:23:21] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:24:53] info : BACKEND: ### getdpThermal calculation ### [15:25:07] info : BACKEND: Iteration Nr. 14 : Largest error ratio: 1.04 [15:25:09] info : BACKEND: ### getdpEMGeneral3D calculation ### [15:26:38] info : BACKEND: ### getdpThermal calculation ### [15:26:52] info : BACKEND: Iteration Nr. 15 : Largest error ratio: 0.621 [15:26:52] info : BACKEND: ACCURATE STEP CONVERGED (15 iterations, error ratio 0.621292) [15:27:19] info : BACKEND: Post processing results. [15:30:08] info : BACKEND: Calculating global variables. [15:30:10] info : UI: Calculation time: 4813s [15:30:10] info : STATUS: Starting ParaView [15:30:14] ERROR: >> ParaView process: stderr: ( 3.836s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.836s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [15:30:14] ERROR: >> ParaView process: stderr: ( 3.862s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.862s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [15:30:14] ERROR: >> ParaView process: stderr: ( 3.862s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.862s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [15:30:14] ERROR: >> ParaView process: stderr: ( 3.894s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.894s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [15:30:14] ERROR: >> ParaView process: stderr: ( 3.991s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.991s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.991s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.991s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.991s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 3.991s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [15:30:14] ERROR: >> ParaView process: stderr: ( 4.002s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.002s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.002s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.002s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.002s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.002s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [15:30:14] ERROR: >> ParaView process: stderr: ( 4.005s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.005s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.005s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.005s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.005s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.005s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [15:30:14] ERROR: >> ParaView process: stderr: ( 4.014s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.014s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.014s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.014s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.014s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.014s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [15:30:14] ERROR: >> ParaView process: stderr: ( 4.018s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.018s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.018s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.018s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.018s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device ( 4.018s) [paraview ] VisRTXBackend.cxx:42 WARN| VisRTX Error: Unsupported device [15:30:19] ERROR: >> ParaView process: stderr: Traceback (most recent call last): File "", line 90, in File "C:\CENOS\third-party\ParaView-5.9.0-Windows-Python3.8-msvc2017-64bit\bin\Lib\site-packages\paraview\simple.py", line 319, in RenderAllViews for view in GetViews(): Render(view) File "C:\CENOS\third-party\ParaView-5.9.0-Windows-Python3.8-msvc2017-64bit\bin\Lib\site-packages\paraview\simple.py", line 306, in Render view.StillRender() File "C:\CENOS\third-party\ParaView-5.9.0-Windows-Python3.8-msvc2017-64bit\bin\Lib\site-packages\paraview\servermanager.py", line 433, in __ConvertArgumentsAndCall retVal = func(*newArgs) File "Script", line 255, in File "Script", line 231, in plotAuto2 TypeError: object of type 'NoneType' has no len() [16:07:07] info : STATUS: ParaView has been closed [16:07:21] WARN : vtkView: 'boundaryId' field is not found in domain 'wp'. Adding empty one. [16:07:21] WARN : vtkView: 'boundaryId' field is not found in domain 'indu'. Adding empty one. [16:07:21] WARN : vtkView: 'boundaryId' field is not found in domain 'air'. Adding empty one. [16:08:15] info : BACKEND: read entities [16:08:15] info : BACKEND: Reading mesh data. [16:08:24] info : BACKEND: Reading physics input. [16:08:30] info : BACKEND: Preparing simulation setup. [16:09:18] info : BACKEND: Starting calculation. [16:09:18] info : BACKEND: Calculating. [16:09:41] info : BACKEND: Time step = 1 / Time = 0.01 s / Time step size = 0.01 s [16:09:44] info : BACKEND: ### getdpEMGeneral3D calculation ### [16:11:12] info : BACKEND: ### getdpThermal calculation ###