// Created on: 1995-01-16
// Created by: Remi LEQUETTE
// Copyright (c) 1995-1999 Matra Datavision
// Copyright (c) 1999-2014 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.

#ifndef _GeomAPI_PointsToBSplineSurface_HeaderFile
#define _GeomAPI_PointsToBSplineSurface_HeaderFile

#include <Standard.hxx>
#include <Standard_DefineAlloc.hxx>
#include <Standard_Handle.hxx>

#include <Standard_Boolean.hxx>
#include <TColgp_Array2OfPnt.hxx>
#include <Standard_Integer.hxx>
#include <GeomAbs_Shape.hxx>
#include <Standard_Real.hxx>
#include <Approx_ParametrizationType.hxx>
#include <TColStd_Array2OfReal.hxx>
class Geom_BSplineSurface;


//! This class is used to approximate or interpolate
//! a BSplineSurface passing through an  Array2 of
//! points, with a given continuity.
//! Describes functions for building a BSpline
//! surface which approximates or interpolates a set of points.
//! A PointsToBSplineSurface object provides a framework for:
//! -   defining the data of the BSpline surface to be built,
//! -   implementing the approximation algorithm
//! or the interpolation algorithm, and consulting the results.
//! In fact, class contains 3 algorithms, 2 for approximation and 1
//! for interpolation.
//! First approximation algorithm is based on usual least square criterium:
//! minimization of square distance between samplimg points and result surface.
//! Second approximation algorithm uses least square criterium and additional 
//! minimization of some local characteristic of surface (first, second and third
//! partial derivative), which allows managing shape of surface. 
//! Interpolation algorithm produces surface, which passes through sampling points.
//!
//! There is accordance between parametrization of result surface S(U, V) and
//! indexes of array Points(i, j): first index corresponds U parameter of surface, 
//! second - V parameter of surface.
//! So, points of any j-th column Points(*, j) represent any V isoline of surface,
//! points of any i-th row Point(i, *) represent any U isoline of surface.
//! 
//! For each sampling point parameters U, V are calculated according to 
//! type of parametrization, which can be Approx_ChordLength, Approx_Centripetal 
//! or Approx_IsoParametric. Default value is Approx_ChordLength.
//! For ChordLength parametrisation U(i) = U(i-1) + P(i).Distance(P(i-1)),
//! For Centripetal type  U(i) = U(i-1) + Sqrt(P(i).Distance(P(i-1))).
//! Centripetal type can get better result for irregular distances between points.
//!
//! Approximation and interpolation algorithms can build periodical surface along U
//! direction, which corresponds columns of array Points(i, j), 
//! if corresponding parameter (thePeriodic, see comments below) of called 
//! methods is set to True. Algorithm uses first row Points(1, *) as periodic boundary,
//! so to avoid getting wrong surface it is necessary to keep distance between 
//! corresponding points of first and last rows of Points:
//! Points(1, *) != Points(Upper, *).

class GeomAPI_PointsToBSplineSurface
{
public:

  DEFINE_STANDARD_ALLOC

  
  //! Constructs an empty algorithm for
  //! approximation or interpolation of a surface.
  //! Use:
  //! -   an Init function to define and build the
  //! BSpline surface by approximation, or
  //! -   an Interpolate function to define and build
  //! the BSpline surface by interpolation.
  Standard_EXPORT GeomAPI_PointsToBSplineSurface();
  
  //! Approximates  a BSpline  Surface passing  through  an
  //! array of  Points.  The resulting BSpline will  have
  //! the following properties:
  //! 1- his degree will be in the range [Degmin,Degmax]
  //! 2- his  continuity will be  at  least <Continuity>
  //! 3- the distance from the point <Points> to the
  //! BSpline will be lower to Tol3D.

  Standard_EXPORT GeomAPI_PointsToBSplineSurface(const TColgp_Array2OfPnt& Points, 
    const Standard_Integer DegMin = 3, const Standard_Integer DegMax = 8, 
    const GeomAbs_Shape Continuity = GeomAbs_C2, const Standard_Real Tol3D = 1.0e-3);
  
  //! Approximates  a BSpline  Surface passing  through  an
  //! array of  Points.  The resulting BSpline will  have
  //! the following properties:
  //! 1- his degree will be in the range [Degmin,Degmax]
  //! 2- his  continuity will be  at  least <Continuity>
  //! 3- the distance from the point <Points> to the
  //! BSpline will be lower to Tol3D.

  Standard_EXPORT GeomAPI_PointsToBSplineSurface(const TColgp_Array2OfPnt& Points, 
    const Approx_ParametrizationType ParType, 
    const Standard_Integer DegMin = 3, const Standard_Integer DegMax = 8, 
    const GeomAbs_Shape Continuity = GeomAbs_C2, const Standard_Real Tol3D = 1.0e-3);
  
  //! Approximates  a BSpline  Surface passing  through  an
  //! array of  points using variational smoothing algorithm,
  //! which tries to minimize additional criterium:
  //! Weight1*CurveLength + Weight2*Curvature + Weight3*Torsion.

  Standard_EXPORT GeomAPI_PointsToBSplineSurface(const TColgp_Array2OfPnt& Points, 
    const Standard_Real Weight1, const Standard_Real Weight2, const Standard_Real Weight3, 
    const Standard_Integer DegMax = 8, const GeomAbs_Shape Continuity = GeomAbs_C2, 
    const Standard_Real Tol3D = 1.0e-3);
  
  //! Approximates  a BSpline  Surface passing  through  an
  //! array of  Points.
  //!
  //! The points will be constructed as follow:
  //! P(i,j) = gp_Pnt( X0 + (i-1)*dX ,
  //! Y0 + (j-1)*dY ,
  //! ZPoints(i,j)   )
  //!
  //! The resulting BSpline will  have the following
  //! properties:
  //! 1- his degree will be in the range [Degmin,Degmax]
  //! 2- his  continuity will be  at  least <Continuity>
  //! 3- the distance from the point <Points> to the
  //! BSpline will be lower to Tol3D
  //! 4- the parametrization of the surface will verify:
  //! S->Value( U, V) = gp_Pnt( U, V, Z(U,V) );

  Standard_EXPORT GeomAPI_PointsToBSplineSurface(const TColStd_Array2OfReal& ZPoints, 
    const Standard_Real X0, const Standard_Real dX, 
    const Standard_Real Y0, const Standard_Real dY,
    const Standard_Integer DegMin = 3, const Standard_Integer DegMax = 8, 
    const GeomAbs_Shape Continuity = GeomAbs_C2, const Standard_Real Tol3D = 1.0e-3);
  
  //! Approximates  a BSpline Surface passing  through  an
  //! array of  Point.  The resulting BSpline will  have
  //! the following properties:
  //! 1- his degree will be in the range [Degmin,Degmax]
  //! 2- his  continuity will be  at  least <Continuity>
  //! 3- the distance from the point <Points> to the
  //! BSpline will be lower to Tol3D.

  Standard_EXPORT void Init (const TColgp_Array2OfPnt& Points, 
    const Standard_Integer DegMin = 3, const Standard_Integer DegMax = 8, 
    const GeomAbs_Shape Continuity = GeomAbs_C2, const Standard_Real Tol3D = 1.0e-3);
  
  //! Interpolates  a BSpline Surface passing  through  an
  //! array of  Point.  The resulting BSpline will  have
  //! the following properties:
  //! 1- his degree will be 3.
  //! 2- his  continuity will be  C2.

  Standard_EXPORT void Interpolate (const TColgp_Array2OfPnt& Points,  
                                    const Standard_Boolean thePeriodic = Standard_False);
  
  //! Interpolates  a BSpline Surface passing  through  an
  //! array of  Point.  The resulting BSpline will  have
  //! the following properties:
  //! 1- his degree will be 3.
  //! 2- his  continuity will be  C2.

  Standard_EXPORT void Interpolate (const TColgp_Array2OfPnt& Points, const Approx_ParametrizationType ParType,
                                    const Standard_Boolean thePeriodic = Standard_False);
  
  //! Approximates  a BSpline  Surface passing  through  an
  //! array of  Points.
  //!
  //! The points will be constructed as follow:
  //! P(i,j) = gp_Pnt( X0 + (i-1)*dX ,
  //! Y0 + (j-1)*dY ,
  //! ZPoints(i,j)   )
  //!
  //! The resulting BSpline will  have the following
  //! properties:
  //! 1- his degree will be in the range [Degmin,Degmax]
  //! 2- his  continuity will be  at  least <Continuity>
  //! 3- the distance from the point <Points> to the
  //! BSpline will be lower to Tol3D
  //! 4- the parametrization of the surface will verify:
  //! S->Value( U, V) = gp_Pnt( U, V, Z(U,V) );

  Standard_EXPORT void Init (const TColStd_Array2OfReal& ZPoints, 
    const Standard_Real X0, const Standard_Real dX, 
    const Standard_Real Y0, const Standard_Real dY, 
    const Standard_Integer DegMin = 3, const Standard_Integer DegMax = 8, 
    const GeomAbs_Shape Continuity = GeomAbs_C2, const Standard_Real Tol3D = 1.0e-3);
  
  //! Interpolates  a BSpline  Surface passing  through  an
  //! array of  Points.
  //!
  //! The points will be constructed as follow:
  //! P(i,j) = gp_Pnt( X0 + (i-1)*dX ,
  //! Y0 + (j-1)*dY ,
  //! ZPoints(i,j)   )
  //!
  //! The resulting BSpline will  have the following
  //! properties:
  //! 1- his degree will be 3
  //! 2- his  continuity will be  C2.
  //! 4- the parametrization of the surface will verify:
  //! S->Value( U, V) = gp_Pnt( U, V, Z(U,V) );

  Standard_EXPORT void Interpolate (const TColStd_Array2OfReal& ZPoints, 
    const Standard_Real X0, const Standard_Real dX, const Standard_Real Y0, const Standard_Real dY);
  
  //! Approximates  a BSpline Surface passing  through  an
  //! array of  Point.  The resulting BSpline will  have
  //! the following properties:
  //! 1- his degree will be in the range [Degmin,Degmax]
  //! 2- his  continuity will be  at  least <Continuity>
  //! 3- the distance from the point <Points> to the
  //! BSpline will be lower to Tol3D.

  Standard_EXPORT void Init (const TColgp_Array2OfPnt& Points, 
    const Approx_ParametrizationType ParType, 
    const Standard_Integer DegMin = 3, const Standard_Integer DegMax = 8,
    const GeomAbs_Shape Continuity = GeomAbs_C2, 
    const Standard_Real Tol3D = 1.0e-3, const Standard_Boolean thePeriodic = Standard_False);
  
  //! Approximates  a BSpline Surface passing  through  an
  //! array of  point using variational smoothing algorithm,
  //! which tries to minimize additional criterium:
  //! Weight1*CurveLength + Weight2*Curvature + Weight3*Torsion.

  Standard_EXPORT void Init (const TColgp_Array2OfPnt& Points, 
    const Standard_Real Weight1, const Standard_Real Weight2, const Standard_Real Weight3, 
    const Standard_Integer DegMax = 8, 
    const GeomAbs_Shape Continuity = GeomAbs_C2, const Standard_Real Tol3D = 1.0e-3);
  
  //! Returns the approximate BSpline Surface
  Standard_EXPORT const Handle(Geom_BSplineSurface)& Surface() const;
  Standard_EXPORT operator Handle(Geom_BSplineSurface)() const;
  
  Standard_EXPORT Standard_Boolean IsDone() const;




protected:





private:



  Standard_Boolean myIsDone;
  Handle(Geom_BSplineSurface) mySurface;


};







#endif // _GeomAPI_PointsToBSplineSurface_HeaderFile